Fujitsu ScanSnap S510 Manual

The Fujitsu ScanSnap S510 is a high-speed duplex color document scanner with automatic document feeder, USB 2.0 connectivity, and bundled software including Adobe Acrobat 7.0 Standard and CardMinder 3.0. It features one-touch scanning, automatic document size detection, paper skip function, and supports various paper types including business cards, receipts, and documents up to legal size. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Computer 7. Scanning Documents 8. Scanning Business Cards 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Scanner unit, USB cable, AC adapter, Installation CD-ROM, Quick Start Guide, Carrying case.

Feature	Description
Scanning Speed	Up to 18 pages per minute (color/grayscale)
Document Feeder	Automatic 50-sheet capacity
Scanning Mode	Duplex (both sides simultaneously)
Resolution	Up to 600 dpi
Document Size	Business card to legal size (2.1" x 2.9" to 8.5" x 14")
Connectivity	USB 2.0
Power Button	Turns scanner on/off
Scan Button	One-touch scanning initiation
LED Indicators	Power, Error, Paper status
Paper Eject	Automatic document output

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect USB cable: Attach to scanner and computer USB port.
Connect power: Plug AC adapter into scanner and wall outlet.
Install software: Insert CD-ROM and follow on-screen instructions.
Install drivers: Allow computer to detect and install scanner drivers.

WARNING! Do not place heavy objects on scanner. Keep away from direct sunlight and moisture.

First-Time Setup

Power on scanner; follow software setup prompts.

Install bundled software: Run Setup.exe from CD-ROM.
Configure ScanSnap Manager: Set default scan settings and destinations.
Test scanner: Load sample document and press Scan button.
Set user preferences: Configure file naming, format, and storage locations.

CAUTION! Ensure scanner is on stable surface before operation.

Specifications

Scanner Type: Color image scanner with ADF
Scanning Method: Contact Image Sensor (CIS)
Optical Resolution: 600 dpi
Scanning Speed: 18 ppm (color/grayscale), 36 ppm (monochrome)
Document Size: 2.1" x 2.9" to 8.5" x 14"
Paper Weight: 17 lb to 43 lb bond paper
Interface: USB 2.0
Power Source: AC adapter (100-240V, 50/60Hz)
Operating Environment: 50°F to 95°F, 20% to 80% humidity

Controls and Settings

Access settings via ScanSnap Manager software. Front Panel: POWER button, SCAN button, LED indicators.

Software Controls: Scan settings, File format selection, Destination folder, OCR options, Color mode selection.

Scan Settings: Resolution (150-600 dpi), Color mode (Color/Grayscale/Monochrome), File format (PDF/JPEG/TIFF), Double-page separation, Blank page skip. OCR Settings: Text recognition language, Output file type, Searchable PDF creation. Card Settings: Business card recognition, Contact management integration.

Connecting to Computer

USB connection: Standard USB 2.0 cable included.

Turn off scanner and computer before initial connection.
Connect USB cable to available USB port on computer.
Connect power adapter to scanner and wall outlet.
Turn on scanner, then start computer.
Install drivers when prompted or from installation CD.

Tip: Use direct computer USB port, not USB hub for best performance.

Scanning Documents

Supports various document types including letters, reports, receipts.

Prepare documents: Remove staples and paper clips.
Load documents: Place in automatic document feeder face up.
Adjust guide: Set paper guide to document width.
Scan: Press SCAN button or use software interface.
Review: Check scanned images in destination folder.
OCR processing: Automatic text recognition for searchable PDFs.

WARNING! Do not force documents into feeder. Remove any damaged or torn papers.

Scanning Business Cards

Integrated business card scanning with CardMinder software.

Load business cards: Place in document feeder.
Select card mode: Choose business card setting in software.
Scan: Press SCAN button for automatic processing.
Review data: Card information automatically extracted to contact database.
Export: Sync with Outlook or other contact management software.

Note: Supports standard business card sizes and orientations.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean rollers with approved cleaning sheet.

CAUTION! Do not use alcohol or solvents. Keep scanner cover closed when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Fujitsu Computer Products of America, Inc. All rights reserved. For support, visit www.fujitsu.com/us/services/computing/peripherals/scanners/ or contact 1-800-831-8094.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Scanner not detected	USB connection/power	Check USB cable connections; ensure power is on; reinstall drivers.
Paper jams	Damaged paper/overloading	Remove jammed paper carefully; check for torn pieces; reduce paper load.
Poor scan quality	Dirty rollers/settings	Clean scanner glass and rollers; adjust resolution and color settings.
Software not responding	Computer resources	Restart computer; check system requirements; reinstall ScanSnap Manager.
Business cards not recognized	Card condition/placement	Ensure cards are clean and undamaged; place correctly in feeder.

Reset: Unplug scanner for 30 seconds, then reconnect.

Service: 1-800-831-8094; www.fujitsu.com/us/services/computing/peripherals/scanners/