Fujitsu Nocria Manual

The Fujitsu Nocria is a high-performance air conditioning system featuring advanced cooling/heating technology, energy-efficient operation, intelligent temperature control, remote control functionality, timer settings, air purification filters, sleep mode, and various fan speeds. Designed for residential and commercial use with 220-240V AC power supply. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Indoor unit with LCD display, Remote Control, Air filters, Temperature sensors, Drain pipe, Power cord connector.

Feature	Description
Cooling/Heating	Dual operation modes for year-round comfort
Remote Control	Wireless operation with LCD display
Timer Function	Programmable on/off scheduling
Sleep Mode	Automatic temperature adjustment for sleeping
Air Swing	Adjustable louvers for optimal air distribution
Filter Indicator	Reminder for filter cleaning/replacement
Power Consumption	Energy-efficient operation
Noise Level	Quiet operation technology
Air Purification	Built-in filters for clean air
Auto Restart	Resumes previous settings after power outage

Installation

Unpack and inspect contents. Ensure proper location selection.

1. Select installation location: Choose stable wall with proper clearance.
2. Mount indoor unit: Use provided bracket and secure properly.
3. Connect refrigerant pipes: Ensure proper sealing and insulation.
4. Connect drain pipe: Route to appropriate drainage location.
5. Connect electrical wiring: Follow local electrical codes.
6. Install outdoor unit: Place on stable surface with proper ventilation.

WARNING! Installation must be performed by qualified technician. Ensure proper electrical grounding.

First-Time Setup

Power on unit; follow initial configuration.

1. Set temperature units: Choose Celsius or Fahrenheit.
2. Configure timer settings: Set daily operation schedule.
3. Adjust default temperature: Set preferred cooling/heating levels.
4. Test remote control: Ensure proper communication with unit.
5. Check air flow: Verify proper louver operation.

CAUTION! Allow unit to stabilize for 10 minutes after first power on.

Specifications

• Cooling Capacity: 9000-24000 BTU/h (model dependent)
• Heating Capacity: 9000-24000 BTU/h (model dependent)
• Power Supply: 220-240V AC, 50/60Hz
• Refrigerant: R32/R410A (model dependent)
• Noise Level: 19-42 dB (indoor unit)
• Air Flow: Adjustable multi-directional
• Dimensions: Varies by model
• Weight: 8-15 kg (indoor unit)
• Operating Temp: Cooling: -10°C to 46°C, Heating: -15°C to 24°C

Controls and Settings

Access controls via remote or unit buttons. Unit Controls: POWER, TEMPERATURE, FAN SPEED, MODE SELECTION.

Remote: POWER, TEMPERATURE, MODE (Cool/Heat/Fan/Dry/Auto), FAN SPEED, TIMER, SLEEP, SWING, TURBO.

Temperature: 16°C-30°C adjustable. Fan Speed: Auto/Low/Medium/High/Turbo. Mode: Cooling, Heating, Fan Only, Dry, Auto. Timer: 24-hour programmable. Sleep: Automatic temperature adjustment. Swing: Vertical/Horizontal air direction.

Connecting to Power

Ensure proper electrical connection and grounding.

1. Turn off main power before connection.
2. Use dedicated circuit with proper amperage.
3. Connect to 220-240V AC power source.
4. Ensure proper grounding according to local codes.
5. Test operation after power connection.

Tip: Use surge protector for added protection.

Operating Modes

Supports multiple operation modes for different needs.

1. Cooling Mode: For hot weather temperature control.
2. Heating Mode: For cold weather warmth.
3. Dry Mode: Reduces humidity without significant cooling.
4. Fan Mode: Circulates air without cooling/heating.
5. Auto Mode: Automatically selects cooling or heating.
6. Sleep Mode: Gradually adjusts temperature for comfort.
7. Turbo Mode: Maximum cooling/heating power.
8. Eco Mode: Energy-saving operation.

WARNING! Do not operate in extreme conditions beyond specified limits.

Maintenance Features

Self-cleaning function: Automatic evaporator cleaning. Filter reminder: Alerts when cleaning needed. Auto restart: Resumes operation after power failure. Diagnosis: Error code display for troubleshooting.

Care & Cleaning

Turn off power before maintenance. Clean filters every 2 weeks. Use soft cloth for unit surface.

1. Filter cleaning: Remove, wash with water, dry completely.
2. Unit surface: Wipe with dry soft cloth.
3. Outdoor unit: Keep area clear of debris.
4. Drain pipe: Ensure clear drainage path.

CAUTION! Do not use chemical cleaners or water spray on electrical components.

Regulatory Information

CE certified: Complies with European safety standards. Energy efficiency class: A++ or higher. RoHS compliant: Free of hazardous substances. For support, visit www.fujitsu-general.com or contact local authorized service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not starting	Power supply/remote	Check power connection; replace remote batteries; ensure proper distance.
Poor cooling/heating	Filters/temperature setting	Clean filters; check temperature setting; ensure proper installation.
Water leakage	Drain pipe blockage	Clear drain pipe; ensure proper slope.
Unusual noise	Loose parts/fan	Check for loose components; clean fan blades.
Error code displayed	System fault	Refer to error code chart; contact service if persistent.

Reset: Turn off power for 10 minutes then restart.

Service: Contact authorized Fujitsu service center; www.fujitsu-general.com