Fujitsu LifeBook S7110 Service Manual

The Fujitsu LifeBook S7110 is a business-class notebook featuring Intel Core 2 Duo processor, 14.1-inch XGA display, up to 4GB DDR2 RAM, integrated graphics, modular bay for optical drive or secondary battery, multiple connectivity options including Ethernet, modem, USB, and ExpressCard slot. This service manual provides comprehensive technical information for maintenance, repair, and troubleshooting procedures.

1. Product Overview 2. Technical Specifications 3. Disassembly Procedures 4. Component Replacement 5. Hardware Diagnostics 6. BIOS Setup and Recovery 7. Troubleshooting Guide 8. Parts List and Ordering 9. Safety Precautions 10. Regulatory Compliance

Product Overview

Key components: Main system board, LCD display assembly, keyboard, hard drive, memory modules, cooling system, battery, and modular bay devices.

Component	Description
Processor	Intel Core 2 Duo T7100/T7300 (1.8GHz/2.0GHz)
Display	14.1-inch XGA TFT LCD (1024x768)
Memory	2x SO-DIMM slots, DDR2 667MHz, max 4GB
Storage	2.5-inch SATA HDD, various capacities
Graphics	Intel GMA X3100 integrated graphics
Networking	Gigabit Ethernet, Intel PRO/Wireless
Ports	3x USB 2.0, VGA, modem, LAN, audio
Battery	6-cell or 9-cell Li-ion
Weight	Approximately 2.2 kg
Dimensions	312 x 255 x 33.5 mm

Technical Specifications

Processor: Intel Core 2 Duo T7100 (1.8GHz) or T7300 (2.0GHz)
Chipset: Intel GM965 Express
Memory: DDR2 667MHz, 2 slots, maximum 4GB
Display: 14.1-inch XGA TFT, 1024x768 resolution
Graphics: Intel Graphics Media Accelerator X3100
Storage: SATA HDD, 80GB to 250GB options
Optical Drive: Modular DVD±RW or DVD-ROM
Audio: Realtek ALC262 codec, stereo speakers
Networking: Gigabit Ethernet, 802.11a/b/g wireless
Battery: 6-cell (5200mAh) or 9-cell (7800mAh) Li-ion
Power Adapter: 65W or 90W AC adapter

Disassembly Procedures

Follow proper ESD precautions and use appropriate tools for disassembly.

Remove battery and disconnect AC power.
Remove keyboard: Release latches and disconnect ribbon cable.
Remove palm rest: Remove screws and carefully lift assembly.
Remove display assembly: Disconnect cables and remove hinge screws.
Remove main board: Disconnect all cables and remove mounting screws.
Access internal components: Hard drive, memory, wireless cards.

WARNING! Always disconnect power and battery before disassembly. Handle components with care to avoid damage.

Component Replacement

Step-by-step replacement procedures for common components.

Hard Drive Replacement: Remove bottom cover, disconnect connector, replace drive.
Memory Upgrade: Access memory compartment, insert modules at 45-degree angle.
Keyboard Replacement: Remove keyboard bezel, disconnect cable, install new keyboard.
LCD Display: Remove bezel, disconnect cables, replace LCD panel.
Cooling System: Remove heatsink assembly, clean thermal paste, install new unit.
Battery Replacement: Remove old battery, insert new unit until it clicks.

CAUTION! Use proper torque on screws and ensure all connectors are fully seated.

Hardware Diagnostics

Use built-in diagnostics and external tools for hardware testing.

Test	Procedure	Expected Result
Memory Test	Boot to BIOS diagnostics or use Memtest86+	No errors after full pass
HDD Test	Use Fujitsu diagnostics or third-party tools	No bad sectors, SMART status OK
Display Test	Check for dead pixels, color uniformity	Clear display with no defects
Keyboard Test	Use online keyboard tester	All keys register correctly
Battery Test	Check battery health in Windows or BIOS	Good capacity and charge cycles

BIOS Setup and Recovery

Access BIOS by pressing F2 during boot. Key settings and recovery procedures.

BIOS Navigation: Use arrow keys and Enter to select options.
Boot Order: Configure boot device priority.
Security Settings: Set supervisor and user passwords.
Hardware Configuration: Enable/disable devices and ports.
BIOS Recovery: Use recovery jumper or flash utility for corrupted BIOS.
Default Settings: Load optimized defaults if needed.

Note: BIOS password recovery may require motherboard replacement.

Troubleshooting Guide

Symptom	Possible Cause	Corrective Action
No power	Battery/AC adapter	Check AC adapter, battery, DC-in board
No display	LCD/inverter/GPU	Test external display, check LCD cables
Overheating	Cooling system	Clean fan and heatsink, replace thermal paste
No boot	Memory/HDD	Reseat memory, test HDD, check BIOS settings
Keyboard issues	Cable/controller	Reseat keyboard cable, test with external keyboard
Wireless not working	Card/drivers	Reseat wireless card, update drivers

Parts List and Ordering

Common replacement parts and ordering information.

LCD Assembly: Part number FPCAC1196
Keyboard: Part number S26361-K2910-V200
Hard Drive: Various SATA 2.5-inch models
Memory: DDR2 667MHz SO-DIMM
Battery: 6-cell (FPCBP163) or 9-cell (FPCBP164)
AC Adapter: 65W (FPCAC1266) or 90W (FPCAC1267)
Main Board: Part number D2764
Cooling Fan: Part number BZ001-00110

Order parts through authorized Fujitsu distributors or service centers.

Safety Precautions

Essential safety procedures for service technicians.

Always disconnect AC power and remove battery before servicing.
Use proper ESD protection when handling components.
Follow proper disposal procedures for batteries and components.
Use correct tools to avoid damage to components.
Do not attempt to repair power adapters or batteries.
Keep work area clean and organized.

WARNING! Lithium-ion batteries can be hazardous if damaged. Handle with care.

Regulatory Compliance

Fujitsu LifeBook S7110 complies with international safety and EMC standards including FCC Part 15, CE, UL, CSA, and TÜV. Equipment meets RoHS requirements for hazardous substance restrictions. Copyright © Fujitsu Limited. For technical support and service information, visit www.fujitsu.com or contact authorized service providers.