Fujitsu LifeBook S7110 Manual

The Fujitsu LifeBook S7110 is a business-class laptop featuring Intel Core 2 Duo processor, 14.1-inch XGA display, up to 4GB DDR2 RAM, integrated graphics, modular bay for optical drive or secondary battery, multiple connectivity options including Ethernet, modem, USB 2.0, and PC Card slots. Below are key sections for setup, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Initial Setup 3. Hardware Specifications 4. Controls and Indicators 5. Using the Laptop 6. Connectivity Options 7. Power Management 8. Maintenance & Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 14.1-inch XGA TFT display, Intel Core 2 Duo processor, modular bay system, comprehensive connectivity ports, and security features.

Feature	Description
Processor	Intel Core 2 Duo T7100/T7300
Display	14.1-inch XGA (1024x768) TFT
Memory	Up to 4GB DDR2 RAM
Storage	80-160GB HDD
Optical Drive	Modular DVD±RW
Connectivity	Gigabit Ethernet, 56K modem, WiFi, Bluetooth
Ports	3x USB 2.0, VGA, serial, parallel, PC Card slot
Security	Fingerprint reader, TPM module
Battery	6-cell Li-ion, optional secondary battery
Weight	Approximately 2.2 kg

Initial Setup

Unpack and inspect all components. Connect power adapter for first-time setup.

Connect AC power: Plug adapter into laptop and wall outlet.
Power on: Press power button; follow Windows setup wizard.
Battery charging: Allow full charge before first mobile use.
Driver installation: Use included recovery media if needed.

WARNING! Handle with care; avoid dropping or exposing to liquids. Use original power adapter only.

Hardware Specifications

Processor: Intel Core 2 Duo T7100 (1.8GHz) or T7300 (2.0GHz)
Chipset: Intel 965GM Express
Memory: 1GB DDR2 standard, expandable to 4GB
Display: 14.1-inch XGA TFT, 1024x768 resolution
Graphics: Intel GMA X3100 integrated
Audio: AC'97 compatible, built-in speakers and microphone
Networking: Gigabit Ethernet, 802.11a/b/g WiFi, Bluetooth 2.0
Dimensions: 312 x 255 x 33.5 mm
Operating System: Windows Vista Business/XP Professional

Controls and Indicators

Front panel: Power button, status LEDs (power, battery, HDD, wireless). Keyboard: Full-size with numeric keypad, function keys for brightness, volume, display switching.

Indicator Lights: Power (blue), Battery (orange/green), HDD activity (blinking), Wireless (blue).

Function Keys: Fn+F1 (Sleep), Fn+F2 (Wireless toggle), Fn+F3 (Presentation mode), Fn+F4 (Display switch), Fn+F6 (Touchpad toggle), Fn+F7/F8 (Brightness), Fn+F9/F10 (Volume).

Using the Laptop

Basic operations: Power management, display settings, peripheral connections.

Power on/off: Use power button; proper shutdown via Windows.
Display adjustment: Use Fn+F7/F8 for brightness; Fn+F4 for display output.
Modular bay: Swap between optical drive and secondary battery.
Security: Set up fingerprint reader via pre-installed software.

Tip: Use power saving modes to extend battery life during mobile use.

Connectivity Options

Comprehensive port selection for business connectivity needs.

USB: Three USB 2.0 ports for peripherals.
Network: RJ-45 for Ethernet, RJ-11 for modem.
Video: VGA port for external monitor/projector.
Expansion: PC Card slot and ExpressCard slot.
Wireless: Hardware switch for WiFi/Bluetooth.

Note: Ensure wireless switch is on for WiFi/Bluetooth functionality.

Power Management

Optimize battery life and power settings for mobile productivity.

Battery care: Full discharge cycle monthly for calibration.
Power schemes: Use Windows power options (Max Battery, Portable/Laptop).
Secondary battery: Install in modular bay for extended runtime.
Hibernation: Configure in power options for quick resume.

WARNING! Use only Fujitsu-approved batteries and power adapters.

Maintenance & Care

Proper cleaning and maintenance procedures for longevity.

Cleaning: Use soft, dry cloth for display and surfaces. Isopropyl alcohol for stubborn marks. Compressed air for keyboard.

CAUTION! Do not use liquids directly on surfaces. Unplug and remove battery before cleaning.

Safety Information

FCC compliance: Class B digital device. Proper ventilation required during operation. Avoid extreme temperatures and moisture.

Transportation: Use carrying case. Secure modular bay components before moving.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Battery/AC adapter	Check power connection; try AC adapter without battery
No display	Brightness/output	Adjust brightness; Fn+F4 for display output; connect external monitor
Wireless not working	Hardware switch/drivers	Ensure wireless switch on; check device manager for drivers
Overheating	Ventilation blocked	Ensure vents clear; use on hard surface; check fan operation
Battery not charging	Adapter/battery age	Check adapter connection; battery may need replacement

Reset: Remove battery and AC adapter; hold power button 30 seconds.

Support: Contact Fujitsu support at 1-800-8FUJITSU or www.fujitsu.com/us