Fujitsu FI 6230 Manual

The Fujitsu FI 6230 is a high-performance document scanner designed for office environments, featuring ADF (Automatic Document Feeder) capability, duplex scanning, multiple resolution options up to 600 dpi, USB connectivity, compatibility with TWAIN and ISIS drivers, and support for various document sizes including letter, legal, and A4. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Computer 7. Scanning Documents 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: ADF document feeder, flatbed scanning surface, control panel with LED indicators, USB interface, power adapter.

Feature	Description
ADF capacity	Up to 50 sheets (20 lb/80 gsm)
Scanning resolution	Up to 600 dpi optical
Duplex scanning	Automatic double-sided scanning
Document sizes	Letter, legal, A4, A5, B5
USB connectivity	USB 2.0 interface
Control panel	Power, Scan, Copy buttons with status LEDs
Power adapter	External power supply unit
Software compatibility	TWAIN, ISIS drivers included
Scan speed	Up to 25 ppm (monochrome)
Output formats	PDF, JPEG, TIFF, BMP

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect power adapter: Plug into scanner and wall outlet.
Connect USB cable: Use included USB cable to connect to computer.
Install software: Insert CD or download drivers from Fujitsu website.
Load documents: Adjust ADF guides to document size.

WARNING! Keep scanner away from heat sources and direct sunlight. Ensure proper ventilation around device.

First-Time Setup

Power on scanner; install drivers and software.

Install drivers: Run setup program from CD or downloaded file.
Connect scanner: Plug USB cable after driver installation.
Test scanner: Use included scanning software to verify operation.
Configure settings: Set default resolution, output format, and destination folder.

CAUTION! Do not force paper into ADF; ensure documents are free of staples and clips.

Specifications

Scanner Type: Flatbed with ADF
Maximum Resolution: 600 dpi optical
Scan Speed: Up to 25 ppm (monochrome), 12 ppm (color)
ADF Capacity: 50 sheets maximum
Document Sizes: A4, letter, legal, A5, B5
Interface: USB 2.0
Power Requirements: 100-240V AC, 50/60Hz
Operating Environment: 10-35°C, 20-80% humidity
Dimensions: 298 x 160 x 178 mm
Weight: 3.2 kg

Controls and Settings

Access scanner settings via control panel buttons and software interface.

Control Panel: POWER button, SCAN button, COPY button, status LEDs for power, error, and paper jam.

Software Settings: Resolution (75-600 dpi), color mode (color, grayscale, monochrome), output format (PDF, JPEG, TIFF), destination folder, duplex scanning enable/disable, image adjustment (brightness, contrast).

Connecting to Computer

USB connection to computer with driver installation.

Install drivers before connecting scanner.
Use high-quality USB cable for reliable connection.
Connect to USB 2.0 or higher port for optimal performance.
Verify connection in device manager or scanning software.

Tip: Use original Fujitsu drivers for best compatibility and performance.

Scanning Documents

Supports flatbed and ADF scanning modes.

Prepare documents: Remove staples and paper clips.
Load documents: Place in ADF tray or on flatbed glass.
Select mode: Choose flatbed or ADF in software.
Start scan: Press SCAN button or use software command.
Monitor progress: Watch status LEDs during scanning.
Retrieve files: Find scanned documents in destination folder.

WARNING! Do not scan photos or documents with adhesive labels through ADF to avoid damage.

Maintenance Features

Automatic calibration: Performs self-calibration on power-up. Firmware updates: Available from Fujitsu support website. Diagnostic mode: Access through specific button combinations for troubleshooting.

Care & Cleaning

Unplug scanner before cleaning. Use soft, dry cloth for exterior. Clean glass surface with approved scanner cleaning solution and lint-free cloth.

CAUTION! Do not use alcohol or abrasive cleaners on scanner surfaces. Keep scanner cover closed when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. CE marked for European compliance. RoHS compliant. Copyright © Fujitsu Limited. For support, visit www.fujitsu.com/scanners or contact local Fujitsu support center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Scanner not detected	USB connection/drivers	Check USB cable; reinstall drivers; try different USB port.
Paper jam	Misaligned paper/damaged documents	Clear jammed paper; ensure documents are straight and undamaged.
Poor scan quality	Dirty glass/wrong settings	Clean scanning glass; adjust resolution and color settings.
ADF not feeding	Paper weight/guide position	Use proper paper weight; adjust ADF guides to document size.
Scanner not powering on	Power connection	Check power adapter connection; verify outlet is working.

Reset: Unplug scanner for 30 seconds, then reconnect.

Service: Contact Fujitsu technical support or authorized service center.