Fujitsu FI 6010N Manual

The Fujitsu FI 6010N is a high-performance document scanner designed for office environments, featuring ADF (Automatic Document Feeder) capability, duplex scanning, USB connectivity, and compatibility with various document management software. Below are key sections for setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: ADF unit, flatbed scanner, control panel, USB port, power connector.

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Connect power: Plug AC adapter into scanner and wall outlet.
2. Connect to computer: Use USB cable to connect scanner to computer USB port.
3. Install software: Insert installation CD or download drivers from Fujitsu website.
4. Load paper: Place documents in ADF tray or on flatbed.

WARNING! Keep scanner away from direct sunlight and moisture. Ensure proper ventilation.

First-Time Setup

Power on scanner; install drivers and software.

1. Install drivers: Run setup program from CD or downloaded file.
2. Connect scanner: Plug USB cable when prompted during installation.
3. Test scanner: Use scanning software to perform test scan.
4. Configure settings: Set default resolution, output format, and destination folder.

CAUTION! Do not force paper into ADF; ensure documents are properly aligned.

Specifications

• Scanner Type: Flatbed with ADF
• Maximum Resolution: 600 x 600 dpi optical
• Scan Speed: Up to 20 ppm (mono), 18 ppm (color)
• Document Size: ADF: 2.1" x 2.9" to 8.5" x 14"; Flatbed: 8.5" x 11.7"
• Interface: USB 2.0 High Speed
• Power Consumption: 15W (operation), 5W (standby)
• Operating Environment: 50°F to 95°F, 20% to 80% humidity
• Supported OS: Windows 7/8/10, Windows Server 2008/2012

Controls and Settings

Front Panel: POWER button, SCAN button, COPY button, LED indicators.

Software Controls: Resolution settings, color mode, document size, output format, destination folder.

Scanning Modes: Color, Grayscale, Black & White. Resolution Settings: 150 dpi, 200 dpi, 300 dpi, 600 dpi. Output Formats: PDF, PDF Searchable, JPEG, TIFF, BMP. ADF Settings: Simplex/Duplex, paper size detection.

Connecting to Computer

USB connection: Use provided USB cable. Network connection: Optional network adapter available.

1. Turn off scanner and computer before connecting.
2. Connect USB cable to computer and scanner.
3. Power on scanner, then start computer.
4. Install drivers if not automatically detected.

Tip: Use high-quality USB cable for reliable connection.

Scanning Documents

Supports single sheets via flatbed or multiple sheets via ADF.

1. Prepare documents: Remove staples, paper clips; ensure documents are flat.
2. Load documents: Place in ADF tray or position on flatbed glass.
3. Select scan mode: Choose color, grayscale, or black & white.
4. Set resolution: Choose appropriate dpi for document type.
5. Start scan: Press SCAN button or use software interface.
6. Save file: Choose destination folder and file name.
7. For multiple pages: Use ADF for automatic feeding.
8. For duplex scanning: Enable double-sided scanning in software.

WARNING! Do not scan damaged or torn documents through ADF.

Maintenance

Regular cleaning: Clean glass and rollers with soft, lint-free cloth.

Cleaning Procedure:

1. Unplug scanner from power source.
2. Clean flatbed glass with glass cleaner and soft cloth.
3. Clean ADF rollers with isopropyl alcohol and cloth.
4. Clean exterior with damp cloth (not wet).

CAUTION! Do not use abrasive cleaners or spray liquids directly on scanner.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. CE Mark: Conforms to European EMC Directive. Copyright © 2025 Fujitsu; trademarks of Fujitsu Limited. For support, visit www.fujitsu.com or contact 1-800-富士通.

Troubleshooting

Reset: Unplug scanner for 30 seconds, then reconnect.

Service: 1-800-富士通; www.fujitsu.com