Fujitsu 5750c Manual

The Fujitsu 5750c is a high-performance document scanner designed for office environments, featuring advanced image processing, automatic document feeder, duplex scanning capabilities, multiple output formats, and network connectivity. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Automatic Document Feeder (ADF), flatbed scanner, control panel with LCD display, USB and network interfaces, power supply unit.

Feature	Description
Automatic Document Feeder	Handles up to 50 sheets for batch scanning
Duplex Scanning	Simultaneous front and back scanning
Scan Resolution	Up to 600 dpi optical resolution
Output Formats	PDF, JPEG, TIFF, searchable PDF
Connectivity	USB 2.0, Ethernet network interface
Control Panel	LCD display with navigation buttons
Power Button	Turns scanner on/off
Scan Button	Initiates scanning process
Stop Button	Cancels current operation
Menu Button	Accesses configuration settings

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

1. Connect power cable: Plug power supply into scanner and wall outlet.
2. Connect to computer: Use USB cable for direct connection.
3. Network connection: Connect Ethernet cable for network scanning.
4. Install software: Load driver and utility software from included CD.

WARNING! Scanner is heavy; use proper lifting techniques. Ensure adequate ventilation around unit.

First-Time Setup

Power on scanner; follow initial configuration prompts.

1. Install drivers: Run setup software from CD or download latest version.
2. Configure network: Set IP address via control panel menu if using network.
3. Calibrate scanner: Run calibration utility for optimal image quality.
4. Test scan: Perform test scan to verify proper operation.

CAUTION! Keep scanner on stable surface; avoid direct sunlight and moisture.

Specifications

• Scanner Type: Document scanner with ADF and flatbed
• Maximum Resolution: 600 dpi optical
• Scan Speed: Up to 25 pages per minute (monochrome)
• ADF Capacity: 50 sheets standard paper
• Paper Size: Letter, Legal, A4, A5, B5
• Output Formats: PDF, JPEG, TIFF, searchable PDF
• Connectivity: USB 2.0, 10/100 Ethernet
• Power Requirements: 100-240V AC, 50/60Hz
• Operating Environment: 10-35°C, 20-80% humidity

Controls and Settings

Access settings via control panel menu or configuration software. Front Panel: POWER, SCAN, STOP, MENU, navigation arrows.

Software Interface: Scan settings, destination folders, file naming, image processing options.

Scan Settings: Resolution (150-600 dpi), color mode (color, grayscale, monochrome), file format, destination. Network: IP configuration, network scanning protocols. Maintenance: Calibration, cleaning mode, firmware updates.

Connecting to Systems

USB: Direct connection to computer. Network: Ethernet connection for multiple users.

1. Turn off scanner before making connections.
2. Connect USB cable to computer and scanner.
3. For network use, connect Ethernet cable to router/switch.
4. Install drivers and configuration software.

Tip: Use shielded cables and avoid running near power cables to reduce interference.

Scanning Operations

Supports single documents via flatbed and batch scanning via ADF.

1. Prepare documents: Remove staples and paper clips; ensure documents are flat.
2. Load ADF: Place documents face up in feeder tray; adjust guides.
3. Select settings: Choose resolution, color mode, output format.
4. Initiate scan: Press SCAN button or use software interface.
5. Monitor progress: Watch for jams or errors during scanning.
6. Review output: Check scanned images for quality and completeness.

WARNING! Do not force documents into feeder; keep fingers clear of moving parts.

Maintenance Features

Automatic calibration: Runs on startup and as needed. Cleaning mode: Access via maintenance menu. Firmware updates: Available from manufacturer website.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior; approved cleaning materials for glass and rollers.

CAUTION! Do not use abrasive cleaners or solvents; avoid liquid contact with electronics.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for commercial use. Copyright © 2025 Fujitsu; all trademarks property of Fujitsu Limited. For technical support, visit www.fujitsu.com/support or contact 1-800-富士通.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Scanner not detected	Connection/drivers	Check USB/network connection; reinstall drivers; restart devices.
Poor image quality	Dirty glass/settings	Clean scanner glass; run calibration; adjust resolution settings.
Paper jams	Damaged paper/overload	Clear jammed paper; check for obstructions; reduce paper load.
ADF not feeding	Paper alignment/wear	Adjust paper guides; check roller condition; ensure proper paper type.
Network connection lost	Cable/configuration	Check Ethernet cable; verify IP settings; restart network equipment.

Reset: Menu > System > Factory Reset if available.

Service: 1-800-富士通; www.fujitsu.com/support