Fujitsu 15RLS2 Installation Manual

The Fujitsu 15RLS2 is a 15-inch rack-mount LCD monitor designed for server room and data center applications. This installation manual covers safety precautions, mounting procedures, cable connections, and initial setup for the 15RLS2 rack-mount LCD monitor with KVM functionality, VGA input, USB connectivity, and front-panel controls.

Features at a Glance

Key components: 15-inch LCD display, rack-mount design, KVM functionality, VGA input, USB ports, front control panel, adjustable mounting brackets.

Safety Precautions

Important safety instructions for proper installation and operation.

1. Ensure rack is stable and properly anchored before installation.
2. Use appropriate mounting hardware provided with the unit.
3. Verify power requirements before connecting to power source.
4. Allow proper ventilation and clearance around the unit.
5. Ground the equipment properly to prevent electrical shock.

WARNING! This equipment is heavy; use proper lifting techniques and ensure rack is properly secured to prevent tipping.

Unpacking and Inspection

Carefully unpack and inspect all components.

1. Remove unit from packaging materials.
2. Inspect for shipping damage; report any damage immediately.
3. Verify all components are present: monitor unit, mounting brackets, screws, power cable, documentation.
4. Check for visible damage to screen, casing, or connectors.
5. Keep packaging for possible future shipment.

CAUTION! Do not install damaged equipment. Contact supplier immediately if any damage is found.

Technical Specifications

• Display Size: 15 inches TFT LCD
• Native Resolution: 1024 x 768 pixels
• Input Connectors: VGA, USB type B, USB type A
• Power Requirements: DC 12V, 3A
• Mounting: 1U rack space, 19-inch standard
• Viewing Angles: 140° horizontal, 125° vertical
• Brightness: 250 cd/m² typical
• Contrast Ratio: 400:1 typical
• Operating Temperature: 0°C to 40°C
• Storage Temperature: -20°C to 60°C

Mounting Instructions

Proper rack mounting procedure for secure installation.

1. Verify rack stability and load capacity.
2. Attach mounting brackets to monitor unit using provided screws.
3. Position unit in desired rack location (typically eye-level for optimal viewing).
4. Secure unit to rack using appropriate rack screws.
5. Ensure unit is level and properly aligned in rack.
6. Verify clearance for cable connections and ventilation.

Tip: Use two people for installation to prevent dropping and ensure proper alignment.

Cable Connections

Connect all necessary cables for operation.

1. Connect VGA cable from server or computer to VGA input on monitor.
2. Connect USB cable from server to USB type B port on monitor.
3. Connect keyboard and mouse to USB type A ports on monitor.
4. Connect DC power adapter to power input connector.
5. Route cables neatly to prevent strain on connectors.
6. Secure cables with cable ties if provided.

WARNING! Ensure all connections are secure before applying power.

Initial Setup

Power on and configure basic settings.

1. Apply power to the monitor unit.
2. Press power button on front panel to turn on display.
3. Access OSD menu using front panel controls.
4. Adjust brightness and contrast as needed.
5. Configure input source if multiple inputs are available.
6. Test keyboard and mouse functionality.
7. Verify server connection and display quality.

CAUTION! Allow unit to stabilize at room temperature before making final adjustments.

Front Panel Controls

Understanding and using the front panel controls.

Control Buttons: Power, Menu, Select (+), Adjust (-)

OSD Menu Options: Brightness, Contrast, Color Temperature, Input Select, Position, Reset, Information.

Navigation: Use Menu button to enter OSD, Select (+) and Adjust (-) to navigate and change settings, Menu to exit.

Power Management: Auto power-off feature conserves energy when no signal detected.

KVM Operation

Using Keyboard, Video, Mouse switching functionality.

1. Connect multiple servers using appropriate KVM cables.
2. Use front panel controls or hotkeys to switch between connected servers.
3. Configure KVM settings through OSD menu if available.
4. Test switching between all connected servers.
5. Verify keyboard and mouse functionality on each server.

Tip: Label cables for easy identification of connected servers.

Maintenance

Regular maintenance procedures for optimal performance.

Cleaning: Use dry, lint-free cloth for screen cleaning. For stubborn stains, lightly dampen cloth with water only.

Ventilation: Ensure air vents remain clear of dust and obstructions.

Connections: Periodically check cable connections for tightness.

CAUTION! Do not use chemical cleaners or aerosols. Unplug unit before cleaning.

Troubleshooting

Reset: Use OSD menu reset option to restore factory defaults if needed.

Service: Contact Fujitsu support or authorized service center for technical assistance.