Fujitronic FH 776 Air Cooler Manual

The Fujitronic FH 776 is a high-performance air cooler featuring 3-speed fan control, 4-way air deflection, water tank with ice compartment, oscillating function, remote control, timer settings, energy-saving mode, and portable design with castor wheels. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Water tank with ice compartment, 3-speed fan control, 4-way air deflection louvers, oscillating function, remote control, timer, castor wheels for mobility.

Installation

Unpack and inspect contents. Place on level surface near power outlet.

1. Remove packaging materials and protective films.
2. Fill water tank: Remove tank, fill with clean water, replace securely.
3. Position unit: Ensure at least 50cm clearance from walls and furniture.
4. Plug into AC power outlet (220-240V, 50Hz).

WARNING! Do not operate without water in tank. Ensure unit is on stable surface to prevent tipping.

First-Time Setup

Power on unit; configure initial settings.

1. Water preparation: Fill tank with clean water; add ice to ice compartment for enhanced cooling.
2. Speed selection: Press SPEED button to select desired fan speed (Low recommended for start).
3. Oscillation: Press SWING button to enable automatic oscillation.
4. Timer setting: Press TIMER to set automatic shut-off (1-8 hours).
5. Air direction: Adjust louvers manually for optimal airflow.

CAUTION! Use only clean water. Do not add chemicals or additives to water tank.

Specifications

• Model: FH 776
• Water Tank Capacity: 20 liters
• Fan Speeds: 3 speeds (Low/Medium/High)
• Air Flow: Up to 450 m³/h
• Oscillation: 60-degree automatic
• Timer: 1-8 hours programmable
• Power Supply: 220-240V AC, 50Hz
• Power Consumption: 65W max
• Noise Level: 38-45 dB
• Dimensions: 320 x 320 x 850 mm
• Weight: 8.5 kg (empty)

Controls and Settings

Control Panel: POWER, SPEED, SWING, TIMER, MODE buttons. Remote Control: All functions plus additional MODE selections.

Control Functions: POWER (On/Off), SPEED (Low/Medium/High), SWING (Oscillation On/Off), TIMER (1-8 hours), MODE (Normal/Sleep/Natural).

Operating Modes: NORMAL (continuous operation), SLEEP (auto speed reduction), NATURAL (simulated natural breeze). Timer Settings: 1, 2, 4, 8 hours auto shut-off.

Operation

Daily operation procedures for optimal cooling performance.

1. Ensure water tank is filled to maximum level.
2. Press POWER button to turn unit on.
3. Select fan speed using SPEED button.
4. Adjust air direction using manual louvers.
5. Enable oscillation with SWING button if desired.
6. Set timer for automatic shut-off.
7. Use remote control for convenient operation from distance.

Tip: For maximum cooling, add ice to ice compartment and use high speed setting.

Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Daily: Check water level and refill as needed.
2. Weekly: Clean water tank and replace water.
3. Monthly: Clean cooling pads and air filters.
4. Seasonal: Deep clean entire unit before storage.
5. Annual: Inspect electrical components and connections.

WARNING! Always unplug unit before performing any maintenance.

Energy Saving Features

SLEEP mode: Automatically reduces fan speed after 30 minutes of operation. TIMER function: Automatic shut-off to prevent unnecessary operation. Natural mode: Variable speed operation for efficient cooling.

Care & Cleaning

Unplug before cleaning. Empty water tank completely. Use mild detergent and soft cloth for exterior cleaning.

CAUTION! Do not immerse unit in water. Do not use abrasive cleaners. Ensure unit is completely dry before reuse.

Regulatory Information

CE certified: Complies with European safety standards. RoHS compliant: Free of hazardous substances. Energy efficiency class: A. For support, visit www.fujitronic.com or contact customer service at +49-30-12345678.

Troubleshooting

Reset: Unplug unit for 5 minutes, then restart.

Service: +49-30-12345678; www.fujitronic.com