Fujitronic FA 1300 Manual

The Fujitronic FA 1300 is a high-performance air purifier with HEPA filtration technology, multi-stage air purification system, smart sensors, multiple fan speeds, timer functions, air quality indicator, child lock, and energy-efficient operation. Designed for rooms up to 1300 square feet with advanced particle capture and odor elimination capabilities. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Modes 7. Filter Maintenance 8. Smart Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: HEPA filter, carbon filter, pre-filter, air quality sensor, control panel, remote control, air intake grille, air outlet.

Feature	Description
HEPA Filtration	Captures 99.97% of particles as small as 0.3 microns
Carbon Filter	Eliminates odors and VOCs
Pre-filter	Captures large particles and extends HEPA life
Air Quality Sensor	Automatically adjusts fan speed based on air quality
Fan Speeds	5 speed settings plus Auto and Sleep modes
Timer Function	1-12 hour programmable timer
Child Lock	Prevents accidental setting changes
Filter Replacement Indicator	Alerts when filters need replacement
Air Quality Indicator	Color-coded LED shows current air quality
Power Consumption	Energy-efficient operation

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials from unit and filters.
Place unit on firm, flat surface away from walls and furniture.
Ensure minimum 6-inch clearance on all sides for proper airflow.
Plug into standard 120V AC power outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Power on unit; follow initial setup procedure.

Remove filter packaging: Open rear panel, remove all plastic wraps from filters.
Install filters: Pre-filter, HEPA filter, then carbon filter in correct order.
Close rear panel securely until it clicks into place.
Plug in unit and press power button.
Run initial calibration: Unit will run at high speed for 10 minutes to calibrate sensors.

CAUTION! Do not operate without filters installed. Handle filters carefully to avoid damage.

Specifications

Room Coverage: Up to 1300 sq. ft.
Filtration System: 3-stage (Pre-filter, HEPA, Carbon)
CADR: 350 CFM (Clean Air Delivery Rate)
Noise Level: 25-55 dB depending on fan speed
Power Consumption: 15-75 Watts
Dimensions: 15" x 8" x 20" (H x W x D)
Weight: 18 lbs
Power Source: 120V AC, 60Hz
Filter Life: HEPA: 12 months, Carbon: 6 months, Pre-filter: 3 months

Controls and Settings

Access controls via front panel or remote control. Front Panel: POWER, FAN SPEED, TIMER, MODE, CHILD LOCK, FILTER RESET.

Remote: POWER, FAN SPEED, TIMER, MODE, SLEEP, CHILD LOCK, LIGHT CONTROL.

Fan Speed: 5 levels (1-5) plus Auto and Sleep modes. Timer: Program 1-12 hours. Modes: Auto, Manual, Sleep, Turbo. Child Lock: Press and hold for 3 seconds to enable/disable. Filter Reset: Hold for 5 seconds after filter replacement.

Operating Modes

Multiple operating modes for different needs.

Auto Mode: Unit automatically adjusts fan speed based on air quality sensor readings.
Manual Mode: User selects desired fan speed (1-5).
Sleep Mode: Ultra-quiet operation with dimmed lights.
Turbo Mode: Maximum cleaning power for 30 minutes, then returns to previous setting.
Timer Mode: Set unit to turn off after 1-12 hours.

Tip: Use Auto mode for everyday operation to maintain optimal air quality efficiently.

Filter Maintenance

Regular filter maintenance ensures optimal performance.

Pre-filter: Clean every 2 weeks with vacuum; replace every 3 months.
HEPA Filter: Replace every 12 months or when indicator light comes on.
Carbon Filter: Replace every 6 months for optimal odor control.
Filter Reset: After replacing filters, press and hold FILTER RESET for 5 seconds.

WARNING! Use only genuine Fujitronic replacement filters. Do not wash HEPA or carbon filters.

Smart Features

Air Quality Indicator: Colors indicate air quality (Blue=Good, Yellow=Fair, Red=Poor). Smart Sensor: Continuously monitors particles and adjusts performance. Child Lock: Prevents accidental setting changes. Filter Monitoring: Tracks filter usage and indicates replacement time.

Care & Cleaning

Unplug before cleaning. Wipe exterior with soft, dry cloth. Clean air intake and outlet grilles with vacuum attachment.

CAUTION! Do not use liquid cleaners or aerosols. Do not immerse unit in water. Keep away from moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Energy Star certified for energy efficiency. CARB certified for California air resources compliance. Copyright © 2024 Fujitronic; all rights reserved. For support, visit www.fujitronic.com or contact 1-800-555-HEPA.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not powering on	Power connection	Check power cord connection; ensure outlet is working.
Reduced airflow	Clogged filters	Clean or replace filters as needed.
Unusual noise	Obstructions	Check for objects near air intake/output; ensure filters properly seated.
Air quality indicator not changing	Sensor issue	Clean sensor area; reset unit by unplugging for 1 minute.
Filter light remains on after replacement	Reset not performed	Press and hold FILTER RESET for 5 seconds.

Reset: Unplug unit for 1 minute to reset all systems.

Service: 1-800-555-HEPA; www.fujitronic.com