Fujitronic Air Cooler Manual

The Fujitronic Air Cooler is an advanced evaporative cooling system featuring multiple fan speeds, water tank capacity of 10 liters, adjustable louvers, ice compartment for enhanced cooling, remote control operation, timer function, sleep mode, low water level indicator, castor wheels for mobility, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance 8. Water Management 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Cooling pads, water tank, fan motor, control panel, remote control, castor wheels, ice compartment.

Feature	Description
Cooling Pads	Evaporative cooling technology for natural air cooling
Water Tank	10-liter capacity with low water level indicator
Fan Speeds	3-speed settings (Low, Medium, High)
Ice Compartment	For enhanced cooling performance
Adjustable Louvers	Manual or automatic oscillation
Timer Function	1-12 hours programmable timer
Sleep Mode	Quiet operation with reduced fan speed
Remote Control	Wireless operation from distance
Castor Wheels	360-degree mobility for easy positioning
Power Consumption	Energy efficient operation

Installation

Unpack and inspect contents. Place on level surface near power outlet.

Remove packaging materials and protective covers.
Position unit on flat, stable surface with adequate clearance (minimum 50cm from walls).
Install cooling pads according to instructions (if required).
Fill water tank with clean water.
Plug into AC power outlet.

WARNING! Ensure unit is placed on dry surface away from water sources. Keep away from children.

First-Time Setup

Power on unit; follow initial setup procedure.

Water tank preparation: Fill with clean water to maximum level.
Cooling pad saturation: Allow 10-15 minutes for pads to absorb water.
Power connection: Plug into grounded electrical outlet.
Initial operation: Start with low fan speed for first use.
Remote control: Install batteries and pair with unit.

CAUTION! Do not operate without water in tank. Use only clean water.

Specifications

Water Tank Capacity: 10 liters
Coverage Area: Up to 25 square meters
Fan Speeds: 3 settings (Low, Medium, High)
Cooling Method: Evaporative cooling
Timer: 1-12 hours programmable
Power Source: 220-240V AC, 50Hz
Power Consumption: 65-85W
Noise Level: ≤55 dB
Dimensions: 350 x 350 x 850 mm
Weight: 8.5 kg (empty), 18.5 kg (full)

Controls and Settings

Control Panel: POWER, FAN SPEED, MODE, TIMER, SWING, COOLING.

Remote Control: POWER, FAN SPEED (LOW/MED/HIGH), MODE (NORMAL/COOL/SLEEP), TIMER, SWING, COOLING ON/OFF.

Fan Speed: LOW (quiet operation), MEDIUM (balanced cooling), HIGH (maximum airflow). Mode Settings: NORMAL (standard cooling), COOL (enhanced cooling with ice), SLEEP (reduced noise and speed). Timer: Programmable 1-12 hours auto shut-off. Swing: Manual or automatic louver movement.

Operation Modes

Multiple operation modes for different cooling needs.

Normal Mode: Standard evaporative cooling operation.
Cool Mode: Enhanced cooling with ice compartment activation.
Sleep Mode: Reduced fan speed and noise for nighttime use.
Fan Only Mode: Air circulation without water cooling.

Tip: Use Cool Mode during hottest parts of the day for maximum cooling effect.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Daily: Check water level and refill as needed.
Weekly: Clean cooling pads and water tank.
Monthly: Deep clean entire unit and check for mineral buildup.
Seasonal: Store properly when not in use for extended periods.

WARNING! Always unplug unit before performing maintenance.

Water Management

Proper water management is essential for efficient cooling.

Use clean, fresh water only
Do not use chemical additives
Empty tank when not in use for more than 2 days
Clean tank regularly to prevent algae growth
Use ice packs in compartment for enhanced cooling

CAUTION! Never operate without water. Use only potable water.

Care & Cleaning

Unplug before cleaning. Use mild detergent and soft cloth.

Exterior: Wipe with damp cloth, dry thoroughly.
Water Tank: Empty and clean with mild detergent weekly.
Cooling Pads: Remove and rinse under running water monthly.
Air Filter: Clean or replace as needed.

CAUTION! Do not immerse unit in water. Avoid harsh chemicals.

Regulatory Information

CE Certified: Complies with European safety standards. RoHS Compliant: Free from hazardous substances. Energy Efficiency Class: A. For support, visit www.fujitronic.com or contact customer service at +1-800-555-1234. Copyright © 2024 Fujitronic Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Empty water tank	Fill tank with clean water; check water pump
Weak airflow	Clogged cooling pads	Clean or replace cooling pads
Water leakage	Overfilled tank/damaged seals	Check water level; inspect seals and connections
Unusual noise	Fan obstruction	Check for foreign objects; clean fan blades
Remote not working	Dead batteries/obstruction	Replace batteries; ensure line of sight to unit
Unit not powering on	Power connection	Check power cord and outlet; ensure proper connection

Reset: Unplug for 5 minutes then restart.

Service: +1-800-555-1234; www.fujitronic.com