Fujifilm XP120 Waterproof Camera Manual

The Fujifilm XP120 is a rugged waterproof digital camera featuring 16.4MP resolution, 5x optical zoom, waterproof capability up to 20m (65ft), shockproof from 1.75m (5.7ft), freezeproof to -10°C (14°F), and dustproof construction. With built-in Wi-Fi, Full HD video recording, various shooting modes, and image stabilization. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Shooting Modes 8. Waterproof Operation 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Waterproof body, LCD screen, Lens, Mode dial, Shutter button, Zoom control, Power button, Battery compartment.

FeatureDescription
WaterproofUp to 20m (65ft) depth
ShockproofWithstands drops from 1.75m (5.7ft)
FreezeproofOperates at -10°C (14°F)
DustproofCompletely sealed construction
Image Sensor16.4MP CMOS sensor
Zoom5x optical zoom, 10x digital zoom
LCD Screen3.0-inch LCD monitor
Wi-FiBuilt-in wireless connectivity
Video RecordingFull HD 1080p at 60fps
BatteryLi-ion battery NP-45S

Installation

Unpack and inspect contents. Prepare camera for first use.

  1. Charge battery: Connect charger, insert battery, charge until indicator turns off.
  2. Insert memory card: Open battery compartment, insert SD card.
  3. Install battery: Place charged battery in compartment, close securely.
  4. Check seals: Ensure all covers and seals are properly closed for waterproofing.

WARNING! Ensure all seals are clean and properly closed before water use. Do not force compartments open.

First-Time Setup

Power on camera; follow initial setup prompts.

  1. Set date and time: Use menu to configure current date and time.
  2. Language selection: Choose preferred language (default ENGLISH).
  3. Wi-Fi setup: Configure wireless settings for mobile connectivity.
  4. Shooting mode: Select AUTO mode for beginner use.
  5. Image quality: Set resolution and quality settings.

CAUTION! Always check battery level and memory card space before important shoots.

Specifications

Controls and Settings

Access menu via MENU button. Front controls: Shutter button, Zoom lever, Power button, Mode dial.

Rear controls: PLAYBACK button, MENU, DISP/BACK, Four-way controller, OK button.

Shooting modes: AUTO, PROGRAM, MANUAL, SPORT, BEACH, SNOW, UNDERWATER, etc. Image settings: Image size, Quality, ISO, White Balance, Exposure compensation. Setup: Date/Time, Language, Sound settings, Power save, Format memory card.

Connecting Devices

Wi-Fi: Connect to smartphone/tablet via Fujifilm Camera Remote app. USB: Connect to computer for file transfer. HDMI: Connect to HDTV for viewing.

  1. Wi-Fi setup: Enable Wi-Fi in menu, connect device to camera network.
  2. USB transfer: Use included USB cable for computer connection.
  3. HDMI output: Use micro HDMI cable for TV connection.

Tip: Ensure camera has sufficient battery for wireless transfers.

Shooting Modes

Various modes for different conditions and subjects.

  1. AUTO: Camera selects optimal settings automatically.
  2. PROGRAM: Auto exposure with manual adjustments available.
  3. SPORT: Fast shutter speeds for action shots.
  4. BEACH: Optimized for bright beach conditions.
  5. SNOW: Proper exposure for snowy scenes.
  6. UNDERWATER: Color correction for underwater photography.
  7. PANORAMA: Create wide panoramic images.
  8. VIDEO: Record Full HD movies with stereo sound.

WARNING! Do not change modes while underwater. Ensure proper mode selection before submerging.

Waterproof Operation

Special considerations for underwater and wet environment use.

  1. Pre-dive check: Verify all covers are securely closed.
  2. Underwater mode: Select UNDERWATER scene mode for color correction.
  3. Handling: Use wrist strap to prevent dropping in water.
  4. After use: Rinse with fresh water and dry thoroughly.
  5. Depth limits: Do not exceed 20m (65ft) depth rating.

CAUTION! Never open battery compartment while wet. Allow to dry completely first.

Care & Cleaning

Proper maintenance for extended camera life.

  1. After water use: Rinse with fresh water to remove salt/sand.
  2. Drying: Wipe with soft cloth, air dry completely.
  3. Lens cleaning: Use lens cleaning cloth only.
  4. Seal inspection: Regularly check rubber seals for damage.
  5. Storage: Store in cool, dry place with compartment open.

CAUTION! Do not use chemicals, solvents, or high-pressure water for cleaning.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © Fujifilm Corporation. Wi-Fi certification: Complies with IEEE 802.11b/g/n standards. For support, visit www.fujifilm.com/support or contact regional Fujifilm service centers.

Troubleshooting

SymptomPossible CauseCorrective Action
Camera won't turn onBattery/SwitchCharge battery; ensure power switch is fully engaged.
Blurry imagesLens/StabilityClean lens; use image stabilization; hold camera steady.
Wi-Fi not connectingSettings/DistanceCheck Wi-Fi settings; ensure device is within range.
Memory card errorCard/DamageReinsert card; format in camera; try different card.
Water in compartmentSeal damageDry completely; check seals for damage; service if needed.
Battery drains quicklyUsage/SettingsReduce LCD brightness; turn off Wi-Fi when not needed.

Reset: Menu > Setup > Reset to restore factory settings.

Service: Contact authorized Fujifilm service centers for repairs.

Fujifilm XP120 Waterproof Camera Manual © - All Rights Reserved 2025