Fujifilm X-E2 User Manual

The Fujifilm X-E2 is a premium mirrorless digital camera featuring a 16.3MP APS-C X-Trans CMOS II sensor, EXR Processor II, high-resolution electronic viewfinder (2.36M dots), 3.0-inch LCD monitor, built-in flash, 49-point AF system, Full HD video recording, film simulation modes, manual controls, Wi-Fi connectivity, and compatibility with Fujinon X-mount lenses. Below are key sections for features, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Shooting Modes 7. Wi-Fi Connectivity 8. Accessories 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: X-Trans CMOS II sensor, EXR Processor II, electronic viewfinder, LCD monitor, built-in flash, lens mount, control dials.

Feature	Description
Sensor	16.3MP APS-C X-Trans CMOS II
Processor	EXR Processor II
Viewfinder	2.36M-dot OLED electronic viewfinder
LCD Monitor	3.0-inch 1.04M-dot LCD
Autofocus	49-point hybrid AF system
Video	Full HD 1080p at 60fps
Connectivity	Built-in Wi-Fi
Flash	Built-in pop-up flash (GN 7)
Lens Mount	Fujifilm X-mount
Battery	NP-W126 Li-ion battery

Installation & Setup

Unpack and inspect contents. Charge battery before first use.

Insert battery: Open battery compartment, insert NP-W126 battery.
Insert memory card: Use SD/SDHC/SDXC card in card slot.
Attach lens: Align red dots on camera and lens, twist clockwise until click.
Charge battery: Use provided charger; full charge takes approx. 2 hours.
Power on: Set ON/OFF switch to ON position.

WARNING! Do not touch mirror or sensor; handle lenses with care to avoid damage.

Basic Operation

Power on camera; follow initial setup prompts.

Set date/time: Use MENU > SETUP > DATE/TIME to configure.
Select shooting mode: Use mode dial (P, A, S, M, Auto, etc.).
Adjust exposure: Use front/rear command dials for shutter/aperture.
Focus: Half-press shutter button for AF; use AF mode selector.
Review images: Press PLAYBACK button to view captured photos.

CAUTION! Use neck strap to prevent dropping; avoid extreme temperatures.

Specifications

Sensor: 16.3MP APS-C X-Trans CMOS II
Processor: EXR Processor II
ISO Range: 200-6400 (expandable to 100-25600)
Shutter Speed: 30-1/4000 sec (mechanical), 1/32000 sec (electronic)
Continuous Shooting: Up to 7 fps
Video: Full HD 1920x1080 at 60/30p
Connectivity: Wi-Fi IEEE 802.11b/g/n
Storage: SD/SDHC/SDXC (UHS-I compatible)
Battery Life: Approx. 350 shots per charge
Dimensions: 129 x 74.9 x 37.2 mm
Weight: 300g (body only)

Controls and Settings

Access menus via MENU button. Front controls: Shutter button, Front command dial, Lens release button.

Rear controls: AF-L, AE-L, Q button, Playback, DISP/BACK, Direction buttons, MENU/OK.

Shooting settings: Exposure compensation, Drive mode, White balance, Film simulation, AF mode. Playback: Zoom, Protect, Delete. Setup: Date/time, Sound, Power management, Button customization. Wireless: Wi-Fi settings, Remote control.

Shooting Modes

Program AE (P): Camera sets shutter/aperture. Aperture Priority (A): User sets aperture. Shutter Priority (S): User sets shutter speed. Manual (M): Full manual control. Auto: Fully automatic. Advanced filters: Toy camera, Miniature, etc.

Select mode via mode dial.
Adjust parameters using command dials.
Compose using viewfinder or LCD.
Press shutter button fully to capture.

Tip: Use electronic viewfinder for stable shooting in bright conditions.

Wi-Fi Connectivity

Transfer images and remote control via Fujifilm Camera Remote app.

Enable Wi-Fi: Press Wi-Fi button or MENU > Wireless Settings.
Install app: Download "FUJIFILM Camera Remote" on smartphone.
Connect: Select camera from phone's Wi-Fi list; enter password if prompted.
Transfer: Select images in app to copy to phone.
Remote shoot: Use phone as remote viewfinder and shutter release.

WARNING! Keep firmware updated for optimal Wi-Fi performance.

Accessories

Compatible accessories: Additional NP-W126 batteries, BC-W126 charger, Fujinon X-mount lenses, external flash units, lens hoods, filters, camera cases.

Care & Maintenance

Turn off and remove battery before cleaning. Use blower for sensor/lens cleaning; microfiber cloth for LCD/body.

CAUTION! Do not use solvents; store in dry place with desiccant.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera won't turn on	Battery/connections	Charge battery; ensure properly inserted; check power switch.
Blurry images	Focus/camera shake	Use AF properly; increase shutter speed; use tripod.
Memory card error	Card issues	Reinsert card; format in camera; try different card.
Wi-Fi not connecting	Settings/distance	Enable Wi-Fi; check app; ensure within range (10m).
Battery drains quickly	Usage/settings	Reduce LCD use; disable Wi-Fi when not needed; use OEM battery.

Reset: MENU > SETUP > RESET to restore default settings.

Service: Contact authorized Fujifilm service center; www.fujifilm.com/support