Fujifilm S602 Zoom Manual

The Fujifilm S602 Zoom is a 3.1-megapixel digital camera featuring 6x optical zoom, Super CCD technology for enhanced image quality, multiple shooting modes including manual controls, movie recording capability, USB connectivity, and powered by 4 AA batteries. Below are key sections for features, setup, operation, settings, and troubleshooting.

1. Features at a Glance 2. Camera Setup 3. Basic Operation 4. Specifications 5. Controls and Functions 6. Shooting Modes 7. Playback and Transfer 8. Custom Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 3.1MP Super CCD sensor, 6x optical zoom lens, LCD monitor, Mode dial, Power switch, Flash, and various control buttons.

Feature	Description
Image Sensor	3.1-megapixel Super CCD HR
Zoom Lens	6x optical zoom (equivalent to 35-210mm)
LCD Monitor	1.8-inch color LCD
Shooting Modes	Auto, Program, Aperture Priority, Shutter Priority, Manual
Movie Mode	Records video with sound
Storage Media	xD-Picture Card and SmartMedia compatibility
Power Source	4 AA batteries or AC adapter
Connectivity	USB port for computer connection
Flash Modes	Auto, Red-eye reduction, Forced, Suppressed, Slow Sync
White Balance	Auto, Preset (Fine, Shade, Fluorescent, Incandescent)

Camera Setup

Unpack and inspect contents. Prepare camera for first use.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Insert memory card: Open card slot cover, insert xD-Picture Card or SmartMedia card.
Attach strap: Thread strap through eyelets for secure handling.
Charge battery (if using rechargeable) or connect AC adapter.

WARNING! Do not force memory card; insert correctly. Use recommended batteries only.

Basic Operation

Power on camera; familiarize with basic controls.

Turn on: Slide POWER switch to ON position.
Set mode: Rotate MODE dial to desired shooting mode (Auto recommended for beginners).
Compose shot: Use viewfinder or LCD monitor to frame your subject.
Focus and shoot: Half-press shutter button to focus, then fully press to capture image.
Review images: Press PLAYBACK button to view captured photos.

CAUTION! Keep lens clean; avoid touching with fingers. Store in dry place.

Specifications

Image Sensor: 1/1.7-inch Super CCD HR, 3.1 million effective pixels
Lens: Fujinon 6x optical zoom, f/2.8-3.1, 7.8-46.8mm (35-210mm equivalent)
Digital Zoom: Up to 4.4x
LCD Monitor: 1.8-inch, 130,000 pixels
Focus Range: Normal: 50cm-infinity; Macro: 10cm-80cm
Shutter Speed: 3-1/2000 sec (varies by mode)
ISO Sensitivity: Auto, 160, 200, 400, 800
Flash Range: Wide: 0.3-4.5m; Tele: 0.9-3.6m
Power Supply: 4 AA batteries (alkaline, Ni-MH, or lithium) or AC adapter
Dimensions: 121 x 82 x 97 mm
Weight: Approximately 500g (without batteries and card)

Controls and Functions

Access functions via buttons and MODE dial. Front: Lens, Flash, Self-timer lamp. Rear: LCD, Control buttons, Viewfinder.

Main Controls: POWER switch, MODE dial, Shutter button, Zoom lever, MENU button, DISP/BACK button, Four-way controller, PLAYBACK button.

Shooting Settings: Image quality (Fine/Normal/Basic), White balance, ISO, Flash mode, Exposure compensation, Focus mode (Multi/AF/Manual). Playback: Zoom, Delete, Protect, Slide show, Print marking.

Shooting Modes

Select via MODE dial for different photography situations.

AUTO: Camera sets all parameters automatically.
PROGRAM: Camera sets exposure, user controls other settings.
APERTURE PRIORITY: User sets aperture, camera selects shutter speed.
SHUTTER PRIORITY: User sets shutter speed, camera selects aperture.
MANUAL: User controls both aperture and shutter speed.
MOVIE: Records video clips with audio.
SCENE: Pre-set modes for specific situations (Portrait, Landscape, Night, etc.)

Tip: Use tripod for slow shutter speeds and low-light situations.

Playback and Transfer

Review images and transfer to computer.

Playback: Press PLAYBACK button to view images; use zoom lever to enlarge.
Delete: Press DELETE button to remove unwanted images.
Protect: Mark important images to prevent accidental deletion.
Connect to computer: Use USB cable to transfer images.
Install software: Use included FinePix Viewer for image management.
Print: Connect directly to compatible printer or use DPOF settings.

WARNING! Do not disconnect during data transfer. Use "Safely Remove Hardware" procedure.

Custom Settings

Access MENU to customize camera behavior. Setup: Date/Time, Beep sound, Power save, LCD brightness, Video output format. Custom: AF mode, Continuous shooting, Image parameters (Sharpness, Color, Tone).

Care & Maintenance

Remove batteries before extended storage. Clean with soft, dry cloth; use lens brush for lens cleaning.

CAUTION! Do not use solvents or compressed air. Avoid extreme temperatures and humidity.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera won't turn on	Batteries/connections	Check battery installation; replace with fresh batteries; ensure compartment closed.
Blurry images	Camera shake/focus	Use faster shutter speed or tripod; ensure proper focus; clean lens.
Memory card error	Card issues	Reinsert card; format card in camera; try different card.
Flash not working	Settings/battery	Check flash mode setting; ensure batteries have sufficient charge.
Computer connection failed	Driver/cable	Install proper drivers; check USB cable connection; try different USB port.

Reset: Remove batteries for 30 seconds to reset camera settings.

Service: Contact authorized Fujifilm service center for repairs.