The Fujifilm S4830 is a digital camera featuring 16 megapixels, 34x optical zoom, 3-inch LCD screen, optical image stabilization, HD video recording, various shooting modes, built-in flash, and connectivity options. Below are key sections for features, setup, operation, and troubleshooting.
Key components: 16MP CCD sensor, 34x optical zoom lens, 3.0-inch LCD monitor, built-in flash, USB/AV output, SD card slot.
| Feature | Description |
|---|---|
| Image Sensor | 16 megapixel CCD sensor |
| Lens | 34x optical zoom (24-816mm equivalent) |
| LCD Screen | 3.0-inch TFT LCD monitor |
| Image Stabilization | Optical image stabilization system |
| Video Recording | HD 720p video recording |
| Shooting Modes | Auto, Program, Manual, Scene modes |
| Connectivity | USB 2.0, AV output |
| Storage | SD/SDHC/SDXC memory card slot |
| Power Source | AA batteries or AC adapter |
| Flash | Built-in pop-up flash |
Unpack and inspect contents. Prepare camera for first use.
WARNING! Do not force memory card; insert correctly. Use correct battery polarity.
Power on camera; follow initial setup prompts.
CAUTION! Always turn off camera before inserting/removing memory card or batteries.
Access menu via MENU button. Main controls: Power, Shutter, Zoom, Mode Dial, Playback.
Front Controls: Shutter button, Zoom lever, Lens, Flash, Self-timer lamp.
Rear Controls: MENU, DISP, Playback, Four-way controller, OK button.
Shooting Settings: ISO, White Balance, Exposure Compensation, Flash Mode, Macro, Self-timer. Playback: Zoom, Delete, Protect, Slide Show. Setup: Date/Time, Language, Format, Sound, Power Save.
Various modes for different shooting situations.
Tip: Use optical zoom before digital zoom for better image quality.
Review images and transfer to computer.
WARNING! Do not disconnect USB cable during transfer to avoid data corruption.
Power management and battery usage.
Battery Types: Alkaline AA, Ni-MH rechargeable, Lithium AA. Battery Life: Approximately 300 shots (alkaline), 400 shots (Ni-MH). Power Save: Auto power off after 1, 2, 5 minutes or Off. AC Adapter: Use official Fujifilm AC adapter for extended use.
Proper care ensures long camera life.
Cleaning: Use soft cloth for body and LCD. Use blower for lens. Storage: Store in cool, dry place with lens retracted. Travel: Use protective case. Avoid extreme temperatures, moisture, and sand.
CAUTION! Do not use alcohol or solvents for cleaning. Never touch lens with fingers.
FCC Compliance: Class B digital device. CE Marking: Complies with European directives. Copyright © Fujifilm Corporation. For support, visit www.fujifilm.com/support or contact local Fujifilm service center.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Camera won't turn on | Dead batteries | Replace with fresh batteries; check polarity. |
| Blurry images | Camera shake | Use image stabilization; steady camera; use higher shutter speed. |
| Memory card error | Card issues | Reinsert card; format in camera; try different card. |
| Flash not working | Settings/battery | Enable flash in menu; check battery level. |
| Cannot focus | Subject/distance | Ensure adequate light; maintain minimum focus distance. |
| Computer connection failed | Driver/cable | Install drivers; try different USB cable/port. |
Reset: Menu > Setup > Reset to restore default settings.
Service: Contact Fujifilm authorized service center.