Fujifilm S200EXR Manual

The Fujifilm S200EXR is a high-performance bridge camera featuring a 12-megapixel Super CCD EXR sensor, 14.3x optical zoom (30.5-436mm equivalent), 2.7-inch LCD monitor, manual exposure controls, EXR Auto mode, Film Simulation modes, high-speed continuous shooting, and HD video recording. Below are key sections for camera overview, basic operations, shooting modes, settings, playback, and troubleshooting.

Camera Overview

Key components: Super CCD EXR sensor, Fujinon 14.3x optical zoom lens, 2.7-inch LCD monitor, Mode dial, Command dial, Hot shoe, Built-in flash.

Feature	Description
Image Sensor	12MP 1/1.6-inch Super CCD EXR
Lens	Fujinon 14.3x optical zoom (30.5-436mm equivalent)
LCD Monitor	2.7-inch 230K-dot TFT color LCD
Viewfinder	Electronic viewfinder (EVF)
Shooting Modes	P/A/S/M, EXR Auto, SP Scene Positions
ISO Range	100-12800 (at reduced resolution)
Video Recording	HD 1280x720 at 30fps
Storage	SD/SDHC memory card
Power Source	4x AA batteries or AC adapter
Connectivity	USB 2.0, AV output

Basic Operations

Unpack and inspect contents. Install batteries and memory card.

1. Power on: Slide POWER switch to ON position.
2. Set date/time: Follow on-screen prompts when first powered on.
3. Basic shooting: Turn mode dial to AUTO for automatic operation.
4. Zoom control: Use zoom lever around shutter button.
5. Focus: Half-press shutter button for autofocus.

WARNING! Do not expose camera to extreme temperatures or moisture. Handle lens with care.

Shooting Modes

Select shooting mode using mode dial on top of camera.

1. EXR Auto: Camera automatically selects optimal settings.
2. Program AE (P): Camera sets shutter speed and aperture.
3. Aperture Priority (A): User selects aperture, camera sets shutter speed.
4. Shutter Priority (S): User selects shutter speed, camera sets aperture.
5. Manual (M): User controls both shutter speed and aperture.
6. SP Scene Positions: Pre-set modes for specific scenes (Portrait, Landscape, etc.)
7. Movie Mode: Records HD video with sound.

TIP: Use EXR mode for optimal image quality in various lighting conditions.

Technical Specifications

• Sensor: 12MP 1/1.6-inch Super CCD EXR
• Lens: Fujinon 14.3x optical zoom, f/2.8-5.3
• Focal Length: 30.5-436mm (35mm equivalent)
• Image Stabilization: CCD-shift type
• ISO Sensitivity: 100-3200 (Standard), 6400-12800 (Low resolution)
• Shutter Speed: 30-1/4000 sec
• Continuous Shooting: Up to 1.4 fps at full resolution
• LCD Screen: 2.7-inch 230K-dot TFT color LCD
• Viewfinder: 0.24-inch 200K-dot electronic viewfinder
• Video: 1280x720 HD, 30fps with mono sound
• Storage: SD/SDHC memory card
• Power: 4x AA batteries (alkaline/Ni-MH) or AC adapter
• Dimensions: 133.4 x 93.6 x 145.1 mm
• Weight: 820g (without batteries and memory card)

Controls and Functions

Main controls: Mode dial, Command dial, Shutter button, Zoom lever, Four-way controller.

Top Panel: POWER switch, Mode dial, Shutter button, Zoom lever, Command dial, Exposure compensation button.

Rear Panel: Four-way controller, DISP/BACK button, PLAY button, MENU/OK button, AE/AF lock button, Macro button, Flash button.

Menu System: Shooting menu, Setup menu, Playback menu accessed via MENU button.

Image Quality Settings

Access image quality settings via SHOOTING MENU.

1. Image Size: L (12M), M (6M), S (3M)
2. Image Quality: Fine, Normal
3. EXR Mode: HR (High Resolution), DR (Wide Dynamic Range), SN (High Sensitivity & Low Noise)
4. Film Simulation: Provia/Standard, Velvia/Vivid, Astia/Soft, B&W, Sepia
5. White Balance: Auto, Preset, Custom, Fine, Shade, Fluorescent, Incandescent
6. Color: Standard, Chrome, B&W, Sepia
7. Sharpness: Hard, Standard, Soft
8. Highlight Tone: Hard, Standard, Soft
9. Shadow Tone: Hard, Standard, Soft

Playback and Transfer

Press PLAY button to review captured images and videos.

1. Playback: Use four-way controller to navigate images.
2. Zoom: Press zoom lever toward T to magnify images.
3. Delete: Press trash can button to delete current image.
4. Slideshow: Access via PLAYBACK MENU.
5. Transfer to computer: Connect via USB cable or remove memory card.
6. Print: Direct printing compatible with PictBridge printers.

Note: Use genuine Fujifilm software for optimal image transfer and management.

Custom Functions

Customize camera behavior via SETUP MENU.

• AF Mode: Single, Continuous, Manual
• Metering: Multi, Spot, Average
• Flash Mode: Auto, Red-eye Reduction, Forced Flash, Slow Sync, Suppressed Flash
• Self-timer: 2 sec, 10 sec
• Burst Mode: Top-3, Final-3, Long-period
• Auto ISO: Set maximum ISO limit
• Button Customization: Assign functions to customizable buttons
• Sound Settings: Operation sounds, shutter sound, playback volume

Maintenance

Proper care ensures optimal performance and longevity.

1. Cleaning: Use soft, dry cloth for body and LCD screen.
2. Lens cleaning: Use lens cleaning paper and blower brush.
3. Storage: Remove batteries for long-term storage.
4. Memory cards: Format regularly in camera for optimal performance.
5. Batteries: Use recommended battery types; remove when not in use.

CAUTION! Do not use alcohol or solvents for cleaning. Avoid touching lens surface directly.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Copyright © Fujifilm Corporation. All rights reserved. For technical support and service, visit www.fujifilm.com or contact your local Fujifilm service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera won't turn on	Batteries depleted/incorrectly installed	Replace batteries; ensure correct orientation.
Blurry images	Camera shake/focus issues	Use tripod; ensure proper focus; enable image stabilization.
Memory card error	Card damaged/not formatted	Try different card; format card in camera.
Flash not firing	Flash mode setting	Check flash mode; ensure battery power sufficient.
Poor image quality	Incorrect settings	Adjust ISO, image size, and quality settings.
Battery drains quickly	Old batteries/heavy usage	Use fresh batteries; minimize LCD/Flash usage.
Auto focus not working	Low contrast/subject too close	Use focus assist lamp; ensure adequate distance.

Reset: Setup menu > Reset to restore factory defaults.

Service: Contact authorized Fujifilm service center for repairs.