Fujifilm Prima T2 Manual

The Fujifilm Prima T2 is a compact 35mm point-and-shoot camera featuring autofocus, auto exposure, built-in flash, date imprinting function, and motorized film transport. With its sleek design and easy operation, it's perfect for everyday photography. Below are key sections for camera overview, basic operations, shooting modes, flash functions, troubleshooting, and maintenance.

Camera Overview

Key components: Lens, Viewfinder, Flash, LCD Panel, Film Compartment, Battery Chamber, Strap Eyelet.

Loading Film

Open back cover and insert film cartridge.

1. Open back: Slide back cover lock to open.
2. Insert film: Place 35mm film cartridge in chamber.
3. Pull film leader: Extend to red mark on take-up spool.
4. Close back: Ensure cover locks securely.
5. Auto advance: Camera automatically advances to frame 1.

WARNING! Do not open back cover while film is loaded to avoid exposure. Handle film in subdued light.

Basic Shooting

Power on camera; frame your shot and press shutter.

1. Turn on: Slide main switch to ON position.
2. Compose: Look through viewfinder and frame subject.
3. Focus: Camera automatically focuses when shutter is half-pressed.
4. Shoot: Press shutter release fully to take picture.
5. Film advance: Camera automatically advances to next frame.

CAUTION! Keep fingers away from lens and flash window. Use wrist strap to prevent dropping.

Specifications

• Film Format: 35mm
• Lens: 35mm f/4.5 fixed focus
• Focusing: Autofocus with focus lock
• Exposure: Auto exposure control
• Shutter Speed: 1/125 sec (fixed)
• Flash: Built-in automatic flash (GN 10)
• Film Transport: Motorized advance and rewind
• Power Source: Two AA batteries
• Dimensions: 120mm x 65mm x 40mm
• Weight: 200g (without batteries)

Controls and Functions

Main controls: Shutter Release, Flash Mode Button, LCD Display, Main Switch.

LCD Indicators: Frame counter, Battery warning, Flash ready.

Shooting Modes: Auto mode (default), Flash off, Red-eye reduction. Film Handling: Auto load, Auto advance, Auto rewind. Date Function: Year/Month/Day imprinting (optional).

Flash Modes

Automatic flash with multiple modes.

1. Auto Flash: Flash fires automatically in low light.
2. Flash On: Forces flash to fire in any lighting.
3. Flash Off: Disables flash for natural light shots.
4. Red-eye Reduction: Pre-flash reduces red-eye effect.

Tip: Flash range: 1-3 meters. Allow flash to recharge between shots.

Date Imprinting

Optional date imprinting on photos.

1. Set date: Use date setting button and mode selector.
2. Select format: Choose Year/Month/Day or Month/Day/Year.
3. Enable/Disable: Turn date imprinting on or off as needed.
4. Battery backup: Built-in capacitor maintains date setting.

Note: Date is permanently imprinted on film; cannot be removed later.

Battery Information

Uses two AA batteries for all functions.

• Battery Type: Two AA alkaline or lithium batteries
• Battery Life: Approx. 10 rolls of 24-exposure film
• Battery Warning: LCD shows low battery indicator
• Replacement: Replace both batteries at same time

WARNING! Remove batteries if camera not used for extended periods. Do not mix old and new batteries.

Care & Maintenance

Keep camera clean and store properly.

1. Cleaning: Use soft cloth to wipe exterior.
2. Lens cleaning: Use lens cleaning tissue only.
3. Storage: Store in cool, dry place with batteries removed.
4. Avoid: Extreme temperatures, humidity, and direct sunlight.

CAUTION! Do not use solvents or abrasive cleaners. Never touch shutter mechanism.

Troubleshooting

Reset: Remove and reinsert batteries to reset electronic functions.

Service: Contact authorized Fujifilm service center for repairs.