Fujifilm HS10 Manual Focus

The Fujifilm FinePix HS10 is a high-performance bridge camera featuring a 30x optical zoom lens, 10.3-megapixel BSI-CMOS sensor, full manual controls, and advanced manual focus capabilities. Below are key sections covering manual focus operation, features, settings, techniques, and troubleshooting.

Manual Focus Overview

The HS10 provides comprehensive manual focus control through the focus ring on the lens barrel, allowing precise focus adjustment for creative photography.

Focus Modes

Understanding the different focus modes available on the HS10.

1. AF-S (Single Autofocus): Locks focus when shutter button is half-pressed
2. AF-C (Continuous Autofocus): Continuously adjusts focus on moving subjects
3. MF (Manual Focus): Full manual control using focus ring
4. Macro AF: Autofocus optimized for close-up photography

NOTE: Switch to MF mode for complete manual focus control.

Manual Focus Operation

Step-by-step guide to using manual focus.

1. Set focus mode switch to MF position
2. Rotate focus ring clockwise for closer focus
3. Rotate focus ring counterclockwise for distant focus
4. Use focus assist features for precision
5. Press shutter button halfway to confirm focus
6. Fully press shutter button to capture image

TIP: Practice with stationary subjects before moving to dynamic scenes.

Focus Assist Features

• Digital Zoom: Press OK button to magnify center area for precise focus
• Focus Peaking: Highlights edges in focus (enable in menu)
• Focus Check: Half-press shutter to verify focus accuracy
• Distance Indicator: Shows approximate focus distance on LCD
• Histogram Display: Assist in exposure while focusing

Focus Ring Controls

The focus ring provides tactile control over focus distance with smooth operation.

Ring Operation: Rotate clockwise for closer focus, counterclockwise for infinity. The ring has dampened movement for precise adjustments.

Fine Adjustment: Make small, gradual turns for critical focus. Use focus assist magnification for fine-tuning.

Zoom Relationship: Note that focus ring sensitivity changes with zoom position - more sensitive at telephoto, less at wide angle.

Focus Distance Settings

Understanding focus distance ranges and applications.

1. Macro Range: 1cm to 50cm (with macro mode enabled)
2. Normal Range: 50cm to infinity (standard photography)
3. Infinity Focus: For distant landscapes and astrophotography
4. Hyperfocal Distance: Maximum depth of field settings

WARNING! Avoid forcing focus ring beyond mechanical stops.

Macro Focus Capabilities

The HS10 excels in close-up photography with manual focus.

1. Enable macro mode using macro button
2. Set focus mode to MF for precise control
3. Use focus ring to achieve critical focus
4. Employ focus assist magnification for accuracy
5. Consider using tripod for stability
6. Adjust aperture for desired depth of field

NOTE: Maximum magnification achieved at widest zoom setting.

Focus Lock Techniques

Advanced manual focus techniques for various scenarios.

Custom Focus Settings

Customizable focus parameters in the camera menu.

• Focus Peaking Level: Adjust intensity of focus highlights
• Focus Assist Time: Set duration of magnification assist
• MF Reset: Return to infinity focus quickly
• Focus Ring Direction: Reverse rotation direction if preferred
• Distance Scale Units: Feet or meters display

Troubleshooting Focus Issues

Reset: Menu > Setup > Reset to restore default focus settings.

Support: For technical assistance, contact Fujifilm customer service or visit www.fujifilm.com