Fujifilm FinePix S2940 Manual

The Fujifilm FinePix S2940 is a 14-megapixel digital bridge camera with 18x optical zoom, 3-inch LCD screen, HD video recording, electronic viewfinder, image stabilization, multiple scene modes, and advanced shooting features. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 14MP CCD sensor, 18x optical zoom lens, 3.0-inch LCD monitor, electronic viewfinder, built-in flash, HD video recording.

Getting Started

Unpack and inspect contents. Prepare camera for first use.

1. Insert batteries: Open battery compartment, insert 4 AA batteries with correct polarity.
2. Insert memory card: Open card slot cover, insert SD/SDHC card.
3. Set date and time: Turn camera on, follow on-screen setup prompts.
4. Attach wrist strap: For safe handling.

WARNING! Use only recommended batteries. Do not mix old and new batteries.

Basic Shooting

Power on camera; select shooting mode.

1. Auto mode: Turn mode dial to AUTO for point-and-shoot operation.
2. Compose shot: Use LCD screen or viewfinder to frame your subject.
3. Focus: Half-press shutter button to focus, then press fully to capture.
4. Zoom: Use zoom lever to adjust composition.
5. Flash: Press flash button to select flash mode (Auto, Red-eye, Forced, Suppressed).

CAUTION! Keep lens clean; avoid touching glass surfaces.

Specifications

• Sensor: 14.0 megapixel 1/2.3-inch CCD
• Lens: Fujinon 18x optical zoom, f/3.1-5.6
• Focal Length: 28-504mm (35mm equivalent)
• LCD Monitor: 3.0-inch, 230,000 dots
• Viewfinder: 0.2-inch, 200,000 dots electronic viewfinder
• Video: 1280x720 HD at 30fps with stereo sound
• ISO Sensitivity: 64-6400
• Shooting Modes: Auto, Program, Manual, Scene positions
• Storage: SD/SDHC memory card
• Power: 4x AA batteries (alkaline, Ni-MH, lithium)

Camera Controls

Access functions via mode dial, buttons, and menu system.

Top Controls: Power switch, Shutter button, Mode dial, Zoom lever, Command dial.

Rear Controls: Playback button, Display button, Menu/OK, Navigation buttons, Delete button.

Shooting Settings: ISO, White Balance, Exposure Compensation, Drive Mode, Flash Mode. Playback: Zoom in/out, Slide show, Protect, Rotate. Setup: Date/Time, Sound, Power Save, Format, Language.

Shooting Modes

Select from various shooting modes on mode dial.

1. Auto: Camera selects all settings automatically.
2. Program: Camera selects exposure, user controls other settings.
3. Manual: Full manual control over shutter speed and aperture.
4. Scene Modes: Portrait, Landscape, Sport, Night, Fireworks, Sunset, etc.
5. SP (Scene Position): Advanced scene recognition.

Tip: Use tripod for low-light situations and maximum zoom.

Playback and Transfer

Review images and transfer to computer.

1. Playback: Press playback button to view captured images.
2. Zoom: Use zoom lever to magnify images during playback.
3. Delete: Press delete button to remove unwanted images.
4. USB Transfer: Connect camera to computer via USB cable.
5. Card Reader: Remove memory card and use card reader for faster transfer.
6. Video Playback: Play HD videos on computer or compatible TV.

WARNING! Do not remove memory card or disconnect USB during transfer.

Advanced Features

Face Detection: Automatically detects and focuses on faces. Image Stabilization: Reduces camera shake. Continuous Shooting: Capture multiple shots in sequence. Macro Mode: For close-up photography. Self-Timer: 2-second or 10-second delay.

Care & Maintenance

Turn off camera before cleaning. Use lens cleaning cloth for lens and LCD. Store in cool, dry place.

CAUTION! Do not use solvents or chemicals. Avoid extreme temperatures and humidity.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © Fujifilm Corporation. For support, visit www.fujifilm.com/support or contact your local Fujifilm service center.

Troubleshooting

Reset: Menu > Setup > Reset if available.

Service: Contact authorized Fujifilm service center.