Fujifilm FinePix A820 Manual

The Fujifilm FinePix A820 is an 8.3-megapixel digital camera featuring 3x optical zoom, 2.5-inch LCD monitor, automatic scene recognition, red-eye removal, movie recording capability, 16MB internal memory with SD/SDHC card expansion, USB connectivity, and powered by 2 AA batteries. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Shooting Photos 8. Playback Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 8.3MP CCD sensor, 3x optical zoom lens, 2.5-inch LCD monitor, built-in flash, SD card slot, USB port, AV output.

FeatureDescription
Image Sensor8.3 megapixel CCD
Optical Zoom3x zoom lens (equivalent to 36-108mm)
LCD Monitor2.5-inch color LCD
Memory16MB internal, SD/SDHC card slot
Power Source2 AA batteries
FlashBuilt-in auto flash
Shooting ModesAuto, Manual, Scene modes
Movie ModeVGA resolution with sound
ConnectivityUSB 2.0, AV output
Image StabilizationDigital image stabilization

Installation

Unpack and inspect contents. Prepare camera for first use.

  1. Insert batteries: Open battery compartment, insert 2 AA batteries with correct polarity.
  2. Insert memory card: Open card slot cover, insert SD/SDHC card.
  3. Attach wrist strap: Thread through eyelet for secure handling.
  4. Charge batteries: Use recommended rechargeable batteries if available.

WARNING! Use only recommended battery types. Do not mix old and new batteries.

First-Time Setup

Power on camera; follow initial setup prompts.

  1. Set date and time: Use MENU to set current date and time for photo timestamping.
  2. Select language: Choose from available languages in setup menu.
  3. Format memory card: Format new card for optimal performance.
  4. Adjust basic settings: Set image quality, review time, and sound settings.

CAUTION! Do not remove batteries or memory card while camera is on.

Specifications

Controls and Settings

Access functions via mode dial and menu system. Front: Lens, flash, self-timer lamp. Rear: LCD, zoom lever, playback button, menu button.

Mode Dial: AUTO, MANUAL, SCENE, MOVIE, PLAYBACK.

Shooting Settings: Image size (8M, 5M, 3M), quality (Fine/Normal), ISO, white balance, exposure compensation. Playback: Single image, multi-frame, slide show, zoom playback. Setup: Date/time, sound, LCD brightness, auto power off, format, language.

Connecting Devices

USB: For computer connection and file transfer. AV: For TV playback.

  1. Turn off camera before connecting cables.
  2. Connect USB cable to computer for photo transfer.
  3. Connect AV cable to TV for photo/video playback.
  4. Select appropriate mode on camera (PC or Playback).

Tip: Use included USB cable for reliable connection.

Shooting Photos

Supports various shooting modes and scene recognition.

  1. Turn on camera: Slide power switch to ON position.
  2. Select mode: Choose AUTO for automatic shooting or SCENE for specific conditions.
  3. Compose shot: Use LCD monitor to frame your subject.
  4. Focus: Half-press shutter button for auto-focus.
  5. Take photo: Fully press shutter button to capture image.
  6. Use flash: Press flash button to select auto, forced, suppressed, or red-eye reduction.
  7. Zoom: Use zoom lever for optical zoom (3x).
  8. Self-timer: Press self-timer button for delayed shooting.

WARNING! Do not point camera directly at sun to avoid sensor damage.

Playback Features

Review and manage captured photos and videos.

  1. Enter playback: Press playback button to view images.
  2. Navigate: Use arrow buttons to browse through photos.
  3. Zoom: Use zoom lever to magnify images during playback.
  4. Delete: Press trash button to remove unwanted images.
  5. Slide show: Access from menu for automatic image display.
  6. Protect: Mark important images to prevent accidental deletion.
  7. DPOF: Set print order for direct printing.

Care & Cleaning

Remove batteries before cleaning. Use soft, dry cloth for exterior; lens cleaning paper for lens.

CAUTION! Do not use solvents or chemicals. Store in cool, dry place away from magnetic fields.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © Fujifilm Corporation; all rights reserved. For support, visit www.fujifilm.com or contact your local Fujifilm service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Camera won't turn onBatteries exhausted/incorrectReplace with fresh batteries; check polarity.
Blurry photosCamera shake/focus issueUse tripod; ensure proper focus; clean lens.
Memory card errorCard damaged/incompatibleReformat card; try different card; check compatibility.
Flash not workingSettings/flash chargingCheck flash mode; wait for flash to charge.
Battery drains quicklyBattery type/usageUse recommended batteries; reduce LCD use; turn off when not in use.

Reset: Remove batteries for 30 seconds to reset camera.

Service: Contact authorized Fujifilm service center for repairs.

Fujifilm FinePix A820 Manual © - All Rights Reserved 2025