Fujifilm FinePix 2650 Manual

The Fujifilm FinePix 2650 is a 2.1-megapixel digital camera featuring 3x optical zoom, 1.5-inch LCD monitor, 10MB internal memory with SmartMedia card expansion, USB connectivity, automatic exposure control, macro mode, movie recording capability, and various scene modes. Powered by 4 AA batteries or AC adapter. Below are key sections for features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Basic Operation 4. Specifications 5. Controls and Settings 6. Shooting Modes 7. Playback & Transfer 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 2.1-megapixel CCD sensor, 3x optical zoom lens, 1.5-inch LCD monitor, SmartMedia card slot, USB port, built-in flash.

Feature	Description
Image Sensor	2.1-megapixel CCD
Lens	3x optical zoom (38-114mm equivalent)
LCD Monitor	1.5-inch color TFT
Memory	10MB internal + SmartMedia card
Connectivity	USB 1.1 interface
Power Source	4 AA batteries or AC adapter
Flash	Built-in auto flash
Shooting Modes	Auto, Manual, Scene modes
Movie Mode	Records video with audio
Macro Mode	Close-up photography capability

Installation & Setup

Unpack and inspect contents. Install batteries and memory card.

Insert batteries: Open battery compartment, insert 4 AA batteries observing polarity.
Insert SmartMedia card: Open memory card slot, insert card with label facing up.
Set date/time: Turn camera on, use menu to set current date and time.
Connect to computer: Use USB cable for image transfer.

WARNING! Do not remove SmartMedia card while camera is accessing it. Turn camera off before removing card.

Basic Operation

Power on camera; use mode dial to select shooting mode.

Turn on: Slide power switch to ON position.
Select mode: Turn mode dial to AUTO for automatic shooting.
Compose shot: Use viewfinder or LCD monitor to frame your subject.
Focus: Half-press shutter button to auto-focus.
Take picture: Fully press shutter button to capture image.
Review: Press PLAY button to view captured images.

CAUTION! Avoid touching lens surface. Keep camera away from water and extreme temperatures.

Specifications

Image Sensor: 2.1-megapixel CCD
Resolution: 1600 x 1200 pixels (UXGA)
Lens: 3x optical zoom, f/2.8-4.7
Zoom Range: 38-114mm (35mm equivalent)
LCD Monitor: 1.5-inch TFT, 60,000 pixels
Storage: 10MB internal memory, SmartMedia card slot
File Formats: JPEG (still), AVI (movie)
Connectivity: USB, video output
Power: 4 AA batteries or AC adapter
Dimensions: 109 x 76 x 69 mm
Weight: 295g (without batteries)

Controls and Settings

Access menu via MENU button. Mode Dial: AUTO, MANUAL, MOVIE, PLAYBACK, SETUP.

Main Controls: Power switch, Shutter button, Zoom lever, Mode dial, Menu button, Display button, Flash mode button.

Shooting Settings: Image quality (FINE/NORMAL/BASIC), White balance (Auto/Daylight/Fluorescent/Incandescent), ISO sensitivity (Auto/100/200/400), Exposure compensation (±2.0EV). Playback: Single image, Index display, Slide show, Delete, Protect. Setup: Date/Time, LCD brightness, Auto power off, Beep sound, Video output format.

Shooting Modes

Auto Mode: Camera automatically selects optimal settings. Manual Mode: User controls exposure, white balance, ISO. Scene Modes: Portrait, Landscape, Sports, Night scene. Movie Mode: Records video clips with audio (up to 30 seconds).

Select mode using mode dial.
For manual mode: Use menu to adjust exposure compensation, white balance, ISO.
For scene modes: Choose appropriate scene for shooting conditions.
For movie mode: Press shutter to start recording, press again to stop.

Tip: Use tripod for low-light conditions and night photography.

Playback & Transfer

View images on LCD monitor or transfer to computer.

Playback: Press PLAY button, use arrow buttons to navigate images.
Zoom: Use zoom lever during playback to magnify images.
Delete: Press trash can button to delete unwanted images.
Protect: Use menu to protect important images from accidental deletion.
Transfer to PC: Connect USB cable, install FinePixView software if needed.
Print: Connect to compatible printer via USB or remove card for direct printing.

WARNING! Do not disconnect USB cable during data transfer. Use "Safely Remove Hardware" feature on computer.

Advanced Features

Macro Mode: For close-up photography (10cm minimum distance). Self-Timer: 10-second delay for self-portraits. Continuous Shooting: Captures multiple images in rapid succession. Exposure Bracketing: Takes three shots at different exposures.

Care & Maintenance

Remove batteries before extended storage. Clean with soft, dry cloth only.

CAUTION! Do not use chemicals or abrasive cleaners on lens. Store in cool, dry place. Avoid extreme temperatures and humidity.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Fujifilm Corporation; all rights reserved. For support, visit www.fujifilm.com or contact your local Fujifilm service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera won't turn on	Dead batteries	Replace with fresh batteries; check polarity.
Blurry images	Camera shake/focus	Use tripod; ensure focus lock before shooting.
Memory card error	Card not formatted	Format card in camera; check for damage.
No flash	Flash off/low battery	Enable flash in menu; replace batteries.
USB connection failed	Driver/connection	Install FinePixView software; check cable connection.

Reset: Remove batteries for 30 seconds to reset camera.

Service: Contact authorized Fujifilm service center for repairs.