Fujifilm E510 Manual

The Fujifilm FinePix E510 is a 5.2 megapixel digital camera featuring a 3x optical zoom lens, 2.0-inch LCD monitor, automatic and manual exposure modes, macro photography capability, movie recording, and USB connectivity. Below are key sections for camera overview, basic operations, shooting modes, settings, playback, connectivity, maintenance, and troubleshooting.

Camera Overview

Key components: 5.2MP CCD sensor, 3x optical zoom lens, 2.0-inch LCD monitor, mode dial, power button, shutter button, zoom control, navigation buttons.

Component	Description
Lens	3x optical zoom, f/2.9-f/5.5 aperture range
LCD Monitor	2.0-inch color TFT LCD, 154,000 pixels
Mode Dial	Selects shooting modes (Auto, Manual, Scene, etc.)
Power Button	Turns camera on/off
Shutter Button	Half-press to focus, full press to capture
Zoom Control	Adjusts optical and digital zoom
Navigation Buttons	Menu navigation and quick settings access
Memory Card Slot	Accepts xD-Picture Card
USB Port	For computer connection and data transfer
DC Input	For external power adapter

Basic Operations

Getting started with your Fujifilm E510 camera.

1. Insert batteries: Open battery compartment, install two AA batteries.
2. Insert memory card: Open card slot cover, insert xD-Picture Card.
3. Power on: Press power button; camera initializes.
4. Set date/time: Follow on-screen prompts to set current date and time.
5. Basic shooting: Point camera, half-press shutter to focus, full press to capture.

WARNING! Do not force memory card; insert correctly. Use recommended batteries only.

Shooting Modes

Select shooting modes using the mode dial for different photography scenarios.

1. Auto Mode: Camera automatically selects settings for optimal results.
2. Manual Mode: Adjust shutter speed and aperture manually.
3. Scene Modes: Pre-set configurations for specific situations (Portrait, Landscape, Sports, Night).
4. Macro Mode: For close-up photography (minimum distance 7.5cm).
5. Movie Mode: Record video clips with audio.

Tip: Use tripod for low-light conditions and macro photography.

Specifications

• Image Sensor: 5.2 megapixel CCD
• Lens: 3x optical zoom (equivalent to 28-91mm)
• LCD Monitor: 2.0-inch TFT color LCD, 154,000 pixels
• Storage: xD-Picture Card (16MB to 2GB supported)
• Focus Range: Normal: 60cm-infinity; Macro: 7.5cm-80cm
• Exposure Control: Programmed AE, Aperture Priority, Shutter Priority, Manual
• ISO Sensitivity: Auto, 80, 100, 200, 400
• Power Source: 2x AA batteries or AC power adapter
• Interface: USB 2.0, AV output

Camera Settings

Access camera settings through the MENU button and navigation controls.

Image Quality: Fine, Normal, Basic resolution settings

White Balance: Auto, Daylight, Shade, Fluorescent, Incandescent

Flash Modes: Auto, Red-eye Reduction, Forced Flash, Suppressed Flash, Slow Sync

Exposure Compensation: ±2.0 EV in 1/3 EV steps

Self-Timer: 2-second and 10-second delay options

Date/Time: Set and display on images

Playback Functions

Review and manage your captured images and videos.

1. Switch to playback: Press PLAYBACK button.
2. Navigate images: Use left/right arrows to browse photos.
3. Zoom: Press zoom button to magnify images up to 4x.
4. Delete: Press DELETE button to remove unwanted images.
5. Slide Show: Automatic playback of all images in memory.
6. Protect: Mark images as protected to prevent accidental deletion.

Note: Protected images cannot be deleted until protection is removed.

Connecting to Computer

Transfer images from camera to computer using USB connection.

1. Install software: Insert included CD and install FinePixViewer software.
2. Connect camera: Use USB cable to connect camera to computer USB port.
3. Set mode: Turn camera to PLAYBACK mode for image transfer.
4. Transfer images: Use software to download and organize photos.

Tip: Ensure camera batteries are fully charged before transferring large numbers of images.

Battery and Power

Power management and battery usage information.

• Battery Type: 2x AA alkaline or Ni-MH rechargeable batteries
• Battery Life: Approximately 150 shots with alkaline batteries
• Power Saving: Auto power-off after 2 minutes of inactivity
• AC Power: Use optional AC power adapter for extended use
• Battery Indicator: Check battery level on LCD display

CAUTION! Use only recommended batteries and power accessories.

Care & Maintenance

Proper care to ensure long camera life and optimal performance.

1. Cleaning: Use soft, dry cloth for camera body and LCD screen.
2. Lens cleaning: Use lens cleaning paper and blower brush only.
3. Storage: Store in cool, dry place with lens cap attached.
4. Moisture: Avoid using in high humidity or extreme temperatures.

WARNING! Do not use alcohol or solvents for cleaning. Keep away from water and sand.

Regulatory Information

FCC Compliance: Class B digital device compliant with Part 15 rules. Copyright © Fujifilm Corporation. All rights reserved. For technical support and service, visit www.fujifilm.com or contact your local Fujifilm service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera won't turn on	Dead batteries	Replace with fresh batteries; check polarity
Blurry images	Camera shake/focus	Use tripod; ensure proper focus; clean lens
Memory card error	Card not formatted	Format card in camera; check for damage
Flash not working	Flash mode setting	Check flash mode; allow flash to charge
Computer connection failed	Driver/connection	Reinstall drivers; try different USB port
LCD screen blank	Power saving mode	Press any button to wake; check battery

Reset: Remove batteries for 30 seconds to reset camera settings.

Service: Contact authorized Fujifilm service center for repairs.