Fujifilm AX200 Manual

The Fujifilm AX200 is a compact film camera featuring automatic exposure control, built-in flash, auto film loading/advancing/rewinding, focus-free operation, date imprint function, and compatibility with 35mm film. Powered by two AA batteries, it's designed for easy point-and-shoot photography with basic features suitable for everyday use. Below are key sections for operation, features, loading film, flash usage, troubleshooting, and specifications.

Features at a Glance

Key components: Lens, Viewfinder, Flash, Film compartment, Battery chamber, LCD panel, Control buttons.

Loading Film

Open back cover and insert 35mm film cartridge.

1. Open back: Slide latch and lift back cover.
2. Insert film: Place cartridge in film chamber, pull leader to red mark.
3. Close back: Ensure film is properly seated before closing.
4. Auto advance: Camera automatically advances to frame 1.

WARNING! Do not open back cover while film is loaded to avoid exposure. Handle film in subdued light.

Basic Operation

Power on camera; ready indicator lights when batteries are installed.

1. Compose shot: Look through viewfinder and frame subject.
2. Focus: Camera is focus-free for subjects 1.2m to infinity.
3. Exposure: Automatic exposure control adjusts shutter speed and aperture.
4. Shoot: Press shutter release button fully.
5. Advance: Camera automatically advances to next frame.

CAUTION! Keep fingers away from lens and flash window. Avoid pointing at bright light sources.

Specifications

• Film Format: 35mm film
• Lens: Fixed focus f/5.6
• Focus Range: 1.2m to infinity
• Shutter: Programmed electronic shutter
• Exposure Control: Automatic
• Flash: Built-in automatic flash (GN 10)
• Film Transport: Automatic loading, advance, and rewind
• Power Source: Two AA batteries
• Dimensions: Compact body design
• Weight: Lightweight for easy carrying

Controls and Settings

Front: Lens, Viewfinder, Flash, Shutter release. Top: LCD panel, Flash button. Back: Viewfinder eyepiece, Film compartment latch.

LCD Display: Frame counter, Battery indicator, Flash ready indicator.

Operation: Automatic exposure, Fixed focus, Auto film transport. Flash: Auto flash in low light, Manual flash override. Date function: Set date imprint (month/day/year or day/month/year format).

Flash Usage

Built-in flash activates automatically in low light. Manual flash available.

1. Auto flash: Flash fires when light is insufficient.
2. Manual flash: Press flash button to force flash on.
3. Flash range: Effective up to 3 meters (10 feet).
4. Recycling: Wait for flash ready indicator before next shot.

Tip: For best results, stay within 1.5-3 meters from subject when using flash.

Date Function

Optional date imprinting on photos. Set date using controls.

1. Access date setting: Use date set buttons.
2. Set date: Adjust month, day, year using appropriate buttons.
3. Select format: Choose between month/day/year or day/month/year.
4. Disable: Turn off date imprint when not needed.

WARNING! Date imprint is permanent on film. Verify date is correct before shooting important photos.

Battery Installation

Requires two AA batteries for operation.

1. Open battery cover: Slide or lift battery compartment door.
2. Insert batteries: Follow polarity markings (+/-).
3. Close cover: Ensure secure closure.
4. Check power: LCD should display battery status.

CAUTION! Use fresh batteries. Remove batteries if camera will not be used for extended periods to prevent leakage.

Care & Maintenance

Keep camera clean and dry. Store in cool, dry place when not in use.

CAUTION! Do not expose to extreme temperatures or moisture. Clean lens with soft brush or lens tissue only.

Troubleshooting

Reset: Remove and reinstall batteries if camera malfunctions.

Service: Contact authorized Fujifilm service center for repairs.