Fujifilm A350 Manual

The Fujifilm A350 is a 5.1 megapixel digital camera featuring a 3x optical zoom lens, 1.8-inch LCD monitor, automatic exposure modes, macro photography capability, movie recording function, and USB connectivity. Powered by 2 AA batteries, the camera offers simple operation with intuitive controls for beginners and casual photographers. Below are key sections for camera overview, basic operations, shooting modes, playback functions, settings, and troubleshooting.

Camera Overview

Key components: 5.1MP CCD sensor, 3x optical zoom lens, 1.8-inch LCD monitor, mode dial, shutter button, zoom control, navigation buttons.

Component	Description
Lens	3x optical zoom, f/2.8-4.8
LCD Monitor	1.8-inch TFT color LCD
Shutter Button	Half-press for focus, full press to capture
Mode Dial	Selects shooting modes (Auto, Manual, Scene, etc.)
Zoom Control	Adjusts optical and digital zoom
Power Button	Turns camera on/off
Flash	Built-in auto flash with red-eye reduction
Memory Card Slot	Supports xD-Picture Card
USB Port	For computer connection and image transfer
Battery Compartment	Holds 2 AA batteries

Basic Operations

Getting started with your Fujifilm A350 camera.

1. Insert batteries: Open battery compartment, insert 2 AA batteries with correct polarity.
2. Insert memory card: Open card slot cover, insert xD-Picture Card with label facing up.
3. Turn on camera: Press power button, wait for LCD to activate.
4. Set date/time: Follow on-screen prompts to set current date and time.
5. Take first photo: Point camera at subject, half-press shutter to focus, then fully press to capture.

WARNING! Do not force memory card; insert gently. Use recommended batteries only.

Shooting Modes

Select from various shooting modes using the mode dial.

1. Auto Mode: Camera automatically selects optimal settings for point-and-shoot operation.
2. Manual Mode: Allows manual adjustment of exposure, white balance, and ISO settings.
3. Scene Modes: Pre-optimized settings for specific conditions (Portrait, Landscape, Night, Sports).
4. Movie Mode: Records video clips with audio (limited by memory card capacity).
5. Macro Mode: For close-up photography (minimum distance: 10cm).

TIP: Use scene modes for best results in specific lighting conditions.

Specifications

• Image Sensor: 5.1 megapixel CCD
• Lens: 3x optical zoom (equivalent to 38-114mm)
• LCD Monitor: 1.8-inch TFT color, 60,000 pixels
• Focus Range: Normal: 60cm to infinity; Macro: 10-80cm
• Exposure Control: Programmed AE, exposure compensation (±2.0EV)
• White Balance: Auto, Preset (Daylight, Shade, Fluorescent, Incandescent)
• ISO Sensitivity: Auto, 80, 100, 200, 400
• Flash: Auto, Red-eye Reduction, Forced Flash, Suppressed Flash, Slow Sync
• Storage: xD-Picture Card (16MB to 512MB)
• Power Source: 2 AA batteries (alkaline, Ni-MH, or lithium)
• Dimensions: 93 x 60 x 28 mm
• Weight: 150g (without batteries and memory card)

Controls and Functions

Camera controls and their functions for optimal operation.

Front Controls: Shutter button, zoom lever, self-timer lamp, microphone, flash.

Rear Controls: LCD monitor, mode dial, navigation buttons (up/down/left/right), MENU/OK button, DISP/BACK button, playback button.

Shooting Functions: Exposure compensation, white balance, ISO settings, image size/quality, self-timer, continuous shooting, flash modes.

Playback Functions: Single image display, multi-frame display, zoom playback, slide show, image protection, DPOF printing.

Playback and Transfer

Viewing photos and transferring them to your computer.

1. Playback: Press playback button to view captured images.
2. Navigation: Use left/right buttons to browse through images.
3. Zoom: Use zoom lever during playback to magnify images.
4. Delete: Press trash can button to delete unwanted images.
5. Computer transfer: Connect USB cable to camera and computer, follow on-screen instructions.
6. Printing: Connect directly to compatible PictBridge printers via USB.

Note: Always use the "Safely Remove Hardware" option before disconnecting USB cable.

Settings Menu

Access and configure camera settings through the menu system.

Menu Category	Settings Available
Image Quality	Fine, Normal, Basic (resolution and compression)
White Balance	Auto, Daylight, Shade, Fluorescent, Incandescent
ISO Sensitivity	Auto, 80, 100, 200, 400
Continuous Shooting	Off, On (approx. 1.3 frames per second)
Self-Timer	Off, 10 seconds, 2 seconds
Date/Time	Set current date and time
LCD Brightness	Adjust monitor brightness (5 levels)
Sounds	Operation sounds, shutter sound, playback sounds
Language	Select menu language
Reset	Restore default camera settings

Accessories

Compatible accessories for enhanced photography experience.

• Memory Cards: xD-Picture Card (16MB, 32MB, 64MB, 128MB, 256MB, 512MB)
• Batteries: 2 AA alkaline, Ni-MH rechargeable, or lithium batteries
• AC Power Adapter: Optional AC-3VX adapter for continuous power
• Camera Case: Soft case for protection during transport
• USB Cable: Included for computer connection
• AV Cable: Optional for TV playback of images and movies

CAUTION! Use only Fujifilm-approved accessories to avoid damage.

Care & Maintenance

Proper care to ensure long camera life and optimal performance.

1. Cleaning: Use soft, dry cloth for camera body and LCD screen.
2. Lens cleaning: Use lens cleaning paper or blower brush; avoid touching lens surface.
3. Storage: Store in cool, dry place away from direct sunlight and moisture.
4. Batteries: Remove batteries if camera will not be used for extended periods.
5. Memory card: Format regularly in camera to maintain optimal performance.

WARNING! Never use alcohol, thinner, or other solvents for cleaning.

Warranty Information

Fujifilm A350 comes with limited warranty covering manufacturing defects.

• Warranty Period: 1 year from date of purchase
• Coverage: Repair or replacement of defective parts
• Exclusions: Accidental damage, misuse, normal wear, consumables
• Registration: Recommended to register product online for warranty service
• Service Centers: Authorized Fujifilm service centers worldwide

For warranty claims, contact Fujifilm customer service with proof of purchase.

Troubleshooting

Problem	Possible Cause	Solution
Camera won't turn on	Dead batteries, improper installation	Replace batteries, ensure correct polarity
Blurry images	Camera shake, subject movement	Use flash, hold camera steady, use higher ISO
Memory card error	Card not formatted, damaged card	Format card in camera, try different card
Flash not working	Flash off setting, low battery	Enable flash in menu, replace batteries
LCD screen blank	Power save mode, display off	Press any button, check display settings
Cannot transfer images	Driver issues, USB connection	Install software, check cable connection
Battery drains quickly	Old batteries, excessive LCD use	Use fresh batteries, reduce LCD usage

Reset: Use menu reset function to restore default settings if problems persist.

Support: Contact Fujifilm customer service at 1-800-800-FUJI or visit www.fujifilm.com