Fujifilm A340 Manual

The Fujifilm A340 is a 4.2-megapixel digital camera featuring a 3x optical zoom lens, 1.5-inch LCD screen, automatic exposure modes, macro photography capability, built-in flash, video recording, USB connectivity, and powered by 2 AA batteries. Below are key sections for camera overview, basic operations, shooting modes, playback functions, settings, and troubleshooting.

Camera Overview

Key components: 4.2MP CCD sensor, 3x optical zoom lens, 1.5-inch LCD monitor, built-in flash, memory card slot, USB port, battery compartment.

Component	Description
Lens	3x optical zoom (equivalent to 35-105mm)
LCD Screen	1.5-inch color TFT display
Power Button	Turns camera on/off
Shutter Button	Half-press to focus, full press to capture
Mode Dial	Selects shooting modes (Auto, Manual, Scene)
Zoom Control	Adjusts optical and digital zoom
Flash	Auto, Red-eye reduction, Forced, Suppressed
Memory Card Slot	Accepts xD-Picture Card
USB Port	For computer connection and data transfer
Battery Compartment	Holds 2 AA batteries

Basic Operations

Getting started with your Fujifilm A340 camera.

1. Insert batteries: Open compartment, insert 2 AA batteries with correct polarity.
2. Insert memory card: Open card slot cover, insert xD-Picture Card.
3. Turn on camera: Press POWER button, wait for LCD to activate.
4. Set date/time: Follow initial setup prompts on LCD screen.
5. Basic shooting: Point camera, half-press shutter to focus, full press to capture.

WARNING! Do not force memory card; insert in correct orientation. Use recommended batteries only.

Shooting Modes

Select from various shooting modes using the mode dial.

1. AUTO mode: Camera automatically selects settings for optimal results.
2. MANUAL mode: Adjust exposure compensation, white balance, ISO settings.
3. SCENE modes: Portrait, Landscape, Sports, Night, Beach, Snow, etc.
4. MACRO mode: For close-up photography (10cm minimum distance).
5. MOVIE mode: Record video clips with audio (limited by memory capacity).

TIP: Use tripod in low-light conditions for sharper images.

Specifications

• Image Sensor: 4.2 million effective pixels, 1/2.7-inch CCD
• Lens: 3x optical zoom, f/2.8-f/4.8, 5.7-17.1mm (35-105mm equivalent)
• LCD Monitor: 1.5-inch, 60,000 pixels TFT color LCD
• Focus Range: Normal: 60cm-infinity; Macro: 10cm-80cm
• Exposure Control: Programmed AE, Exposure compensation (±2.0EV in 1/3 steps)
• White Balance: Automatic, Preset (Daylight, Shade, Fluorescent, Incandescent)
• Flash: Auto, Red-eye reduction, Forced, Suppressed, Slow Sync
• Storage: xD-Picture Card (16MB-512MB supported)
• Power Source: 2 AA batteries (alkaline, Ni-MH, lithium)
• Dimensions: 104 x 62 x 31 mm
• Weight: Approx. 150g (without batteries and memory card)

Controls and Functions

Camera controls and their functions for optimal operation.

Front Controls: Shutter button, Zoom lever, Self-timer/Focus lamp, Microphone, Built-in flash

Rear Controls: LCD monitor, POWER button, MODE button, DISPLAY button, Four-way controller, MENU/OK button, PLAYBACK button

Menu Functions: Image quality (Fine/Normal), ISO sensitivity (Auto/100/200/400), White balance, Continuous shooting, Self-timer, Flash mode, Exposure compensation, Date/Time settings, LCD brightness, Sound settings, Format memory card, Language selection

Playback and Transfer

Viewing images and transferring to computer.

1. Playback mode: Press PLAYBACK button to view captured images.
2. Navigation: Use four-way controller to scroll through images.
3. Zoom playback: Press zoom lever to magnify images during playback.
4. Delete images: Press MENU/OK, select DELETE, choose single or all images.
5. Computer transfer: Connect USB cable, install FinePixViewer software, transfer images.

Note: Always use "Safely Remove Hardware" before disconnecting USB cable.

Settings Menu

Access and configure camera settings through the menu system.

1. Press MENU/OK button to access main menu.
2. Navigate with four-way controller, select with OK button.
3. Shooting settings: Image size, Quality, ISO, White balance, Continuous mode.
4. Setup settings: Date/Time, Sound, LCD brightness, Auto power off, Format, Language.
5. Playback settings: Slide show, Protect images, DPOF printing settings.

Default Settings: Image quality: Normal, ISO: Auto, White balance: Auto, Sound: On

Battery and Power

Power management and battery information.

• Battery Type: 2 AA batteries (alkaline, Ni-MH, lithium)
• Battery Life: Approx. 100 shots with alkaline batteries (LCD on)
• Power Saving: Auto power off function (after 2 minutes default)
• Low Battery Warning: Battery icon blinks when power is low
• AC Power: Optional AC power adapter available (sold separately)

CAUTION! Remove batteries if camera will not be used for extended periods.

Care & Maintenance

Proper care to ensure long camera life.

1. Cleaning lens: Use lens cleaning cloth, blow away dust before wiping.
2. Cleaning body: Use soft, dry cloth; avoid chemicals and solvents.
3. Storage: Store in cool, dry place with batteries removed.
4. LCD protection: Use LCD protective cover to prevent scratches.
5. Memory card: Format regularly in camera for optimal performance.

WARNING! Do not expose camera to extreme temperatures, moisture, or direct sunlight for extended periods.

Warranty Information

Fujifilm Limited Warranty: 1-year limited warranty from date of purchase. Warranty covers defects in materials and workmanship. Does not cover accidental damage, misuse, or normal wear and tear. For warranty service, contact authorized Fujifilm service center with proof of purchase.

Support: Fujifilm Technical Support: 1-800-800-FUJI | www.fujifilm.com

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera won't turn on	Dead batteries	Replace with fresh batteries; check polarity
Blurry images	Camera shake/focus issue	Use tripod; ensure proper focus; clean lens
Memory card error	Card not formatted	Format card in camera; check for damage
Flash not working	Flash mode setting	Change flash mode; check battery level
LCD screen blank	Display setting	Press DISPLAY button; check power save mode
Cannot transfer images	USB connection	Reconnect USB cable; install drivers; check computer port

Reset: Remove batteries for 30 seconds to reset camera settings.

Service Centers: Contact Fujifilm authorized service centers for repairs.