Fujifilm 10.2 Megapixel Digital Camera Manual

The Fujifilm 10.2 Megapixel Digital Camera is a high-performance imaging device featuring a 10.2-megapixel Super CCD sensor, 3x optical zoom lens, 2.5-inch LCD monitor, intelligent flash system, multiple scene modes, movie recording capability, and PictBridge compatibility for direct printing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Basic Photography 7. Playback and Review 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10.2-megapixel Super CCD sensor, Fujinon 3x optical zoom lens, 2.5-inch LCD monitor, built-in flash, SD/SDHC card slot, USB connectivity.

FeatureDescription
Image Sensor10.2 megapixel Super CCD HR
LensFujinon 3x optical zoom (equivalent to 35-105mm)
LCD Display2.5-inch color TFT LCD
StorageSD/SDHC memory card (internal memory available)
Power SourceRechargeable lithium-ion battery NP-45
FlashBuilt-in intelligent flash with red-eye reduction
ConnectivityUSB 2.0, AV output
Shooting ModesAuto, Program, Scene, Movie
Image StabilizationDigital image stabilization
Face DetectionAutomatic face detection technology

Package Contents

Unpack and verify all contents are present.

  1. Fujifilm 10.2 Megapixel Digital Camera
  2. Rechargeable lithium-ion battery NP-45
  3. Battery charger AC-5VX
  4. USB cable
  5. AV cable
  6. Wrist strap
  7. CD-ROM with software and manual
  8. Quick start guide

WARNING! Keep all packaging materials for future reference and safe storage.

First-Time Setup

Prepare your camera for first use following these steps.

  1. Charge the battery: Connect charger to power outlet, insert battery, charge until indicator turns green.
  2. Insert battery: Open battery compartment, insert charged battery with correct polarity.
  3. Insert memory card: Open card slot cover, insert SD/SDHC card until it clicks into place.
  4. Set date and time: Power on camera, follow on-screen prompts to set current date and time.
  5. Attach wrist strap: Thread through eyelet for secure handling.

CAUTION! Use only Fujifilm-approved battery and charger to prevent damage.

Specifications

Controls and Settings

Familiarize yourself with camera controls and menu settings.

External Controls: POWER button, SHUTTER button, ZOOM lever, MODE dial, PLAYBACK button, DISP/BACK button, MENU/OK button, Navigation buttons.

Shooting Menu: Image size (10M, 5M, 3M, 2M), Image quality (Fine/Normal), ISO, White balance, Color mode, Continuous shooting. Setup Menu: Date/Time, Sound settings, LCD brightness, Power save, Format, Language selection. Playback Menu: Slide show, Protect, DPOF, Rotate, Resize.

Basic Photography

Learn the fundamentals of capturing images with your camera.

  1. Power on: Press POWER button, wait for LCD to activate.
  2. Compose shot: Use LCD monitor to frame your subject.
  3. Auto focus: Half-press shutter button until focus confirmation appears.
  4. Capture image: Fully press shutter button to take photo.
  5. Review: Image automatically displays on LCD after capture.
  6. Zoom: Use zoom lever for optical zoom (3x) or digital zoom (additional magnification).
  7. Flash: Press flash button to cycle through auto, forced, suppressed, slow sync modes.

Tip: Keep camera steady and hold breath when pressing shutter for sharper images.

Playback and Review

View and manage your captured images and videos.

  1. Enter playback: Press PLAYBACK button to view stored images.
  2. Navigate: Use left/right navigation buttons to browse through images.
  3. Zoom in: Press up navigation button to magnify image for detail review.
  4. Delete: Press trash can button to delete unwanted images.
  5. Slide show: Access from playback menu for automatic image display.
  6. Protect images: Mark important photos to prevent accidental deletion.
  7. DPOF printing: Set print order for direct printing at photo labs.

WARNING! Do not remove memory card or turn off camera during image transfer or deletion.

Advanced Features

Explore the camera's advanced shooting capabilities.

Scene Modes: Portrait, Landscape, Sport, Night, Fireworks, Sunset, Snow, Beach, Museum, Party, Flower, Text. Movie Mode: Record video with sound (up to memory card capacity). Face Detection: Automatically detects and optimizes focus for human faces. Continuous Shooting: Capture multiple images in rapid succession. Macro Mode: For close-up photography (as close as 5cm).

Care & Maintenance

Proper care ensures optimal performance and longevity.

Clean lens and LCD with soft, lint-free cloth. Use blower brush to remove dust from crevices. Store in cool, dry place away from direct sunlight. Remove battery if camera will not be used for extended periods. Use camera case for protection during transport.

CAUTION! Do not use alcohol, thinner, or other solvents for cleaning. Avoid extreme temperatures and humidity.

Regulatory Information

FCC Part 15: Class B digital device compliant with interference limits. CE marking indicates conformity with European directives. Copyright © 2008 Fujifilm Corporation; all rights reserved. For technical support, visit www.fujifilm.com or contact your local Fujifilm service center.

Troubleshooting

SymptomPossible CauseCorrective Action
Camera won't turn onBattery depleted/incorrectly installedCharge battery; ensure proper installation.
Blurry imagesCamera shake/focus issuesUse tripod; ensure proper focus; clean lens.
Memory card errorCard damaged/incorrect formatReformat card in camera; try different card.
Flash not workingFlash disabled/low batteryEnable flash in settings; charge battery.
LCD display blankDisplay off/power save modePress DISP button; check power save settings.

Reset: Remove battery for 30 seconds to reset camera settings.

Service: Contact authorized Fujifilm service center for repairs.

Fujifilm 10.2 Megapixel Digital Camera Manual © - All Rights Reserved 2025