Fujica STX 1 Manual

The Fujica STX 1 is a 35mm film SLR camera featuring manual exposure control, through-the-lens (TTL) metering, interchangeable lenses with Fujica X-mount, shutter speeds from 1 to 1/1000 sec plus Bulb, self-timer, hot shoe, depth-of-field preview, and battery check. Below are key sections for camera overview, features, operation, lens compatibility, maintenance, and troubleshooting.

Camera Overview

Main components: Camera body, lens mount, film advance lever, shutter release, rewind crank, hot shoe, self-timer, battery compartment.

Component	Description
Film advance lever	Advances film and cocks shutter
Shutter release	Triggers exposure with cable release socket
Rewind crank	Rewinds film after exposure
Hot shoe	For external flash attachment
Self-timer	10-second delay for self-portraits
Battery compartment	Houses battery for light meter
Depth-of-field preview	Previews actual depth of field
Lens release button	Releases lens for interchange
ASA/DIN dial	Sets film speed (25-3200 ASA)
Shutter speed dial	Sets exposure time (1-1/1000 sec + B)

Key Features

Advanced manual SLR with TTL metering and full creative control.

1. TTL center-weighted metering: Accurate exposure measurement through lens.
2. Manual exposure: Set aperture and shutter speed independently.
3. Interchangeable lenses: Fujica X-mount system compatibility.
4. Multiple shutter speeds: 1 sec to 1/1000 sec plus Bulb for long exposures.

NOTE! Camera requires battery for light meter operation. Ensure proper battery installation.

Loading Film

Open camera back and load 35mm film cartridge.

1. Open back: Pull rewind knob upward to open camera back.
2. Insert film: Place film cartridge in chamber, pull leader to take-up spool.
3. Advance film: Use film advance lever to advance to first frame.
4. Set film speed: Adjust ASA dial to match film sensitivity.
5. Close back: Ensure film is properly engaged before closing.

CAUTION! Handle film in subdued light to avoid fogging. Do not force film advance.

Exposure Control

• Shutter Speeds: 1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/125, 1/250, 1/500, 1/1000 sec + B
• Metering: TTL center-weighted with match-needle display in viewfinder
• Aperture Control: Set via lens aperture ring
• Film Speed Range: ASA 25 to 3200
• Exposure Compensation: Manual adjustment via ASA dial
• Battery: 1.35V mercury battery (PX625 equivalent) for meter
• Viewfinder Display: Shows shutter speed, aperture, and meter needle

Lens System

Fujica X-mount lenses provide wide compatibility and optical quality.

Standard Lens: Fujinon 55mm f/1.8 (included)

Other Compatible Lenses: Wide-angle (28mm, 35mm), Telephoto (135mm, 200mm), Zoom (43-75mm, 75-150mm)

Lens Mounting: Align red dot on lens with camera mount, rotate clockwise until click. Lens Removal: Press lens release button, rotate counter-clockwise.

Accessories

Flash units, lens filters, camera cases, cable releases.

1. Flash: Attach to hot shoe or use PC sync cord.
2. Filters: Screw into lens front for creative effects.
3. Cable release: For vibration-free long exposures.
4. Camera case: Protects camera during transport.

Tip: Use lens cap when not shooting to protect lens surface.

Playing DVD Media

This camera uses 35mm film, not digital media. Film processing required.

1. Expose film: Shoot all frames (typically 24 or 36 exposures).
2. Rewind film: Press rewind button, turn rewind crank until resistance stops.
3. Remove film: Open back, remove film cartridge for processing.
4. Process film: Take to photo lab for development and printing.

WARNING! Do not open camera back with film partially exposed - will ruin images.

Maintenance & Care

Clean with soft brush; store in dry place with silica gel.

CAUTION! Do not touch mirror or shutter mechanism; avoid extreme temperatures and humidity.

Specifications

• Camera Type: 35mm SLR with manual exposure
• Lens Mount: Fujica X-mount
• Shutter: Focal plane, 1-1/1000 sec + B
• Metering: TTL center-weighted
• Viewfinder: Fixed eye-level pentaprism
• Film Speed: ASA 25-3200
• Flash Sync: 1/60 sec or slower
• Self-timer: 10-second mechanical delay
• Battery: 1.35V mercury (PX625) for meter only
• Weight: 560g (body only)

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light meter not working	Dead battery	Replace with fresh 1.35V battery
Shutter won't release	Film not advanced	Advance film with lever; check battery
Film advance stuck	Film improperly loaded	Rewind film and reload properly
Blurry images	Camera shake/focus	Use faster shutter speed; check focus
Lens won't mount	Misaligned mount	Align red dots and rotate until click

Service: Contact authorized Fujica service center for repairs.

Battery Replacement: Use only specified 1.35V mercury battery type.