Fujica ST705W Manual

The Fujica ST705W is a classic 35mm film SLR camera featuring a through-the-lens (TTL) metering system, manual exposure control, M42 screw mount lens compatibility, shutter speeds from 1 to 1/700 sec plus Bulb, self-timer, hot shoe, and battery check. Below are key sections covering camera overview, operation, exposure control, lens compatibility, maintenance, and troubleshooting.

Camera Overview

Key components: Camera body with TTL metering, film advance lever, shutter release, rewind crank, exposure counter, self-timer, hot shoe, battery compartment.

Basic Operation

Prepare camera for shooting with proper film loading and settings.

1. Load film: Open back cover, insert film cartridge, pull leader to take-up spool.
2. Advance film: Use film advance lever until counter shows "1".
3. Set film speed: Adjust ISO dial to match film sensitivity.
4. Compose and focus: Look through viewfinder, adjust focus ring.
5. Set exposure: Use TTL meter to determine shutter speed and aperture.
6. Take photo: Press shutter release button smoothly.

WARNING! Do not force controls; handle camera gently to avoid damage.

Exposure Control

Utilize TTL metering system for accurate exposure.

1. Activate meter: Slightly press shutter release to activate TTL metering.
2. Read meter: View needle indicator in viewfinder.
3. Adjust settings: Change shutter speed and/or aperture until needle centers.
4. Manual override: Use personal judgment for creative exposure control.
5. Battery check: Verify meter operation with battery check button.

CAUTION! Meter requires battery; replace if meter fails to respond.

Specifications

• Camera Type: 35mm SLR with TTL metering
• Lens Mount: M42 screw mount
• Shutter: Focal plane shutter, 1 to 1/700 sec plus Bulb
• Metering: TTL center-weighted averaging
• Film Speed Range: ISO 25 to 1600
• Viewfinder: Fixed pentaprism with microprism focusing aid
• Flash Sync: Hot shoe and PC sync terminal, 1/60 sec
• Self-Timer: Mechanical, approx. 10 second delay
• Battery: 1.35V mercury battery (PX625) for meter
• Dimensions: Standard 35mm SLR body size

Lens Compatibility

Accepts M42 screw mount lenses with full manual operation.

1. Attach lens: Align red dot on lens with camera mount, turn clockwise.
2. Aperture control: Set desired f-stop on lens aperture ring.
3. Focusing: Use focusing ring on lens for sharp images.
4. Stop-down metering: Meter reads at shooting aperture for accuracy.
5. Remove lens: Press lens release button, turn counter-clockwise.

Tip: Ensure lens is securely mounted before shooting.

Flash Photography

Use built-in hot shoe or PC sync terminal for flash units.

1. Attach flash: Slide into hot shoe or connect via PC sync cable.
2. Set sync speed: Use 1/60 sec or slower shutter speed.
3. Determine exposure: Follow flash unit guide number calculations.
4. Manual flash: Set aperture based on flash-to-subject distance.
5. Test fire: Use test button to verify flash operation.

WARNING! Do not use faster than 1/60 sec shutter speed with flash.

Film Loading & Unloading

Proper film handling ensures successful photography.

1. Open back: Pull up rewind knob to open camera back.
2. Insert film: Place cartridge in film chamber, pull leader to take-up spool.
3. Advance film: Use advance lever until film is taut, close back.
4. Advance to first frame: Fire shutter twice while advancing.
5. Rewind film: Press rewind button, turn crank until resistance stops.
6. Remove film: Open back, remove cartridge.

CAUTION! Never force film advance or rewind mechanisms.

Maintenance & Care

Keep camera in optimal condition with proper maintenance.

1. Cleaning: Use soft brush and lens tissue for exterior and lens.
2. Storage: Store in dry, cool place with silica gel to prevent moisture.
3. Battery: Remove if not using for extended periods.
4. Mechanical: Exercise shutter periodically if not in regular use.
5. Professional service: Have camera serviced every few years for lubrication.

WARNING! Do not use alcohol or solvents on camera body or lens.

Troubleshooting

Service: Contact authorized Fujica service center for repairs.