Fujica ST605N Manual

The Fujica ST605N is a classic 35mm film SLR camera featuring a manual focus system, through-the-lens (TTL) metering, M42 screw mount lens compatibility, shutter speeds from 1/2 to 1/700 sec plus Bulb, self-timer, hot shoe for flash, and manual exposure control. Below are key sections for camera overview, operation, lens mounting, exposure settings, flash usage, maintenance, and troubleshooting.

Camera Overview

Key components: Camera body with M42 screw mount, shutter release button, film advance lever, rewind knob, hot shoe, self-timer, battery compartment, and tripod socket.

Component	Description
Shutter release button	Activates shutter; threaded for cable release
Film advance lever	Advances film and cocks shutter
Rewind knob	Rewinds film back into cartridge
Hot shoe	For accessory flash units
Self-timer lever	Delays shutter release by approx. 10 seconds
Battery compartment	Holds PX625 battery for meter
Tripod socket	1/4" standard tripod mount
M42 lens mount	Universal screw mount for compatible lenses
Viewfinder	Shows focusing screen with microprism spot
ASA/DIN dial	Sets film speed for metering

Loading Film

Open camera back and load 35mm film cartridge.

1. Pull up rewind knob to open back cover.
2. Insert film cartridge in left chamber.
3. Pull film leader across to take-up spool.
4. Advance film until sprockets engage perforations.
5. Close back cover and advance twice while firing shutter.
6. Set correct film speed on ASA dial.

WARNING! Avoid touching shutter curtain; handle film in subdued light.

Lens Mounting

Compatible with M42 screw mount lenses.

1. Align red dot on lens with red dot on camera mount.
2. Turn lens clockwise until it clicks into place.
3. To remove: Press lens release button and turn counterclockwise.
4. Set lens to smallest aperture for stop-down metering.

CAUTION! Do not force lens; ensure proper alignment before mounting.

Specifications

• Camera Type: 35mm SLR with manual focus
• Lens Mount: M42 universal screw mount
• Shutter: Focal plane shutter, 1/2 to 1/700 sec plus Bulb
• Metering: TTL center-weighted with CdS cell
• Viewfinder: Fixed pentaprism with microprism focusing aid
• Film Speed: ASA 25 to 1600
• Flash Sync: Hot shoe and PC sync terminal, 1/60 sec
• Battery: PX625 1.35V mercury battery (or equivalent)
• Dimensions: 140 x 92 x 86 mm
• Weight: 720g (body only)

Controls and Settings

Top plate: Shutter speed dial, film advance lever, rewind knob, shutter release, hot shoe. Front: Self-timer, lens release button, depth-of-field preview.

Shutter speeds: B, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/125, 1/250, 1/500, 1/700 sec. Meter activation: Slight pressure on shutter release activates meter needle in viewfinder.

Exposure Control

Manual exposure with TTL metering guidance.

1. Set film speed on ASA dial.
2. Compose image and focus using microprism.
3. Press shutter release halfway to activate meter.
4. Adjust shutter speed and aperture until meter needle centers.
5. Fully press shutter release to take photo.

Tip: For stop-down metering, set lens to shooting aperture before metering.

Flash Photography

Supports accessory flash units via hot shoe or PC sync.

1. Set shutter speed to 1/60 sec or slower for flash sync.
2. Mount flash in hot shoe or connect via PC sync cable.
3. Calculate aperture based on flash guide number and distance.
4. Ensure flash is charged before shooting.

WARNING! Do not use electronic flash at speeds faster than 1/60 sec to avoid partial exposure.

Advanced Features

Self-timer: Cock shutter, set self-timer lever, press shutter release for 10-second delay. Multiple exposures: After exposure, hold rewind button while advancing film to cock shutter without film transport.

Care & Maintenance

Store in dry, cool place with lens removed. Clean lens with lens tissue and blower brush. Avoid touching mirror and focusing screen.

CAUTION! Do not lubricate shutter mechanism; keep away from sand and dust.

Warranty Information

Original warranty expired. Camera is vintage collectible. For service, consult professional camera repair specialists familiar with classic Fujica models. Serial number located on camera baseplate.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Meter not working	Dead battery	Replace PX625 battery; check contacts.
Shutter not firing	Film not advanced	Advance film fully; check if shutter is cocked.
Film not advancing	Improper loading	Open back and ensure film engaged with sprockets.
Blurry images	Camera shake/focus	Use faster shutter speed; check focus in viewfinder.
Light leaks	Worn seals	Replace light seals around back door.

Note: For persistent issues, consult professional repair service.

Vintage Camera Resources: Online forums and specialist repair shops for classic cameras.