Fujica Ger Manual

The Fujica Ger is a classic 35mm film camera featuring manual exposure control, built-in light meter, interchangeable lenses, manual focus system, film advance lever, shutter speed dial, aperture control ring, hot shoe for flash, self-timer, and battery check. Compatible with Fujica bayonet mount lenses. Below are key sections for camera overview, features, operation, settings, maintenance, and troubleshooting.

Camera Overview

Main components: Camera body, lens mount, film advance lever, shutter release button, rewind crank, exposure counter, hot shoe, battery compartment.

Component	Description
Film Advance Lever	Advances film to next frame and cocks shutter
Shutter Release Button	Triggers the shutter mechanism
Rewind Crank	Rewinds film back into cartridge
Exposure Counter	Shows number of exposures taken
Hot Shoe	For attaching external flash units
Battery Compartment	Holds battery for light meter
Shutter Speed Dial	Sets exposure time (1s to 1/1000s)
Aperture Ring	Controls lens opening (f/1.4 to f/16)
Focus Ring	Adjusts lens focus distance
Self-Timer Lever	Delays shutter release by 10 seconds

Key Features

Professional-grade manual camera with precise control over all exposure parameters.

1. Manual exposure control with built-in light meter
2. Fujica bayonet lens mount system
3. Shutter speeds from 1 second to 1/1000 second
4. Battery-powered CdS light meter
5. Multiple exposure capability
6. Depth of field preview button
7. Film speed settings from ISO 25 to 3200

NOTE! Camera requires battery for light meter operation. Use fresh batteries for accurate readings.

Loading Film

Proper film loading ensures smooth operation and prevents film damage.

1. Open camera back: Pull up rewind knob to release back cover.
2. Insert film: Place 35mm cartridge in left chamber, pull film leader to right take-up spool.
3. Thread film: Align film leader with orange marks, advance film until sprockets engage.
4. Close back: Ensure back cover locks securely.
5. Advance film: Use film advance lever until exposure counter shows "1".

WARNING! Never force film advance lever. If resistance is felt, check film loading.

Camera Operation

Basic shooting procedure for optimal results.

1. Set film speed: Match ISO dial to film speed for accurate meter readings.
2. Compose image: Look through viewfinder and frame your subject.
3. Focus: Rotate focus ring until image appears sharp in viewfinder.
4. Set exposure: Adjust shutter speed and aperture based on light meter reading.
5. Advance film: Use film advance lever to prepare for next shot.

TIP: Always use lens cap when camera is not in use to protect lens elements.

Exposure Settings

• Shutter Speeds: B, 1, 2, 4, 8, 15, 30, 60, 125, 250, 500, 1000
• Aperture Range: f/1.4, f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16
• Light Meter: Center-weighted averaging meter with match-needle display
• Exposure Compensation: Adjust film speed dial for exposure compensation
• Battery Check: Press battery check button; needle should move to marked area

Lens Compatibility

Fujica Ger uses Fujica bayonet mount system. Compatible lenses include:

Standard Lenses: Fujinon 55mm f/1.8, Fujinon 50mm f/1.4

Wide Angle: Fujinon 35mm f/2.8, Fujinon 28mm f/3.5

Telephoto: Fujinon 135mm f/2.8, Fujinon 200mm f/4.5

To change lens: Press lens release button, rotate lens counter-clockwise, remove. Install new lens by aligning red dot and rotating clockwise until click.

Flash Usage

Built-in hot shoe accepts standard flash units with X-sync at 1/60 second.

1. Attach flash to hot shoe, ensuring firm connection.
2. Set shutter speed to 1/60 second or slower.
3. Set aperture based on flash guide number and subject distance.
4. Charge flash unit and wait for ready light.
5. Compose and shoot as normal.

CAUTION! Do not use electronic flash at shutter speeds faster than 1/60 second.

Maintenance & Care

Regular maintenance ensures long camera life and optimal performance.

Clean lens with lens cleaning fluid and microfiber cloth only. Store in dry, cool place with silica gel. Check battery regularly. Have camera serviced every 2-3 years for shutter calibration.

WARNING! Never touch shutter curtains or mirror mechanism. Keep away from extreme temperatures and humidity.

Specifications

• Camera Type: 35mm SLR film camera
• Lens Mount: Fujica bayonet
• Shutter: Focal plane shutter, 1s to 1/1000s + B
• Viewfinder: Fixed eye-level pentaprism, microprism focusing aid
• Metering: CdS center-weighted with match needle
• Flash Sync: 1/60 second, hot shoe and PC sync terminal
• Film Advance: Single-stroke lever, 135° advance
• Self-Timer: Mechanical, approx. 10 second delay
• Battery: 1.35V mercury battery (PX625) or equivalent
• Weight: 650g (body only)

Troubleshooting

Problem	Possible Cause	Solution
Light meter not working	Dead battery	Replace with fresh PX625 battery
Film won't advance	Improper loading	Rewind film and reload properly
Blurry images	Camera shake/focus	Use faster shutter speed; check focus
Shutter not firing	Film not advanced	Advance film until lever stops
Over/under exposure	Meter error	Check battery; clean battery contacts
Film tearing	Sprocket damage	Have camera serviced; replace sprockets

Service: Contact authorized Fujica service center for repairs. Use only qualified technicians.