Fujiaire Air Conditioner Manual

The Fujiaire Air Conditioner is a high-efficiency cooling system with multiple operating modes, energy-saving features, remote control operation, programmable timer, air purification filters, dehumidification function, sleep mode, and adjustable fan speeds. Designed for residential and light commercial use with voltage compatibility for 110-120V AC. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operation Modes 7. Maintenance & Cleaning 8. Energy Saving Tips 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Indoor unit with LCD display, Remote Control, Air filters, Condenser unit, Drain hose, Power cord.

Feature	Description
Cooling Capacity	12,000 BTU/h for rooms up to 550 sq ft
Operating Modes	Cool, Heat, Fan, Dry, Auto
Fan Speeds	Auto, Low, Medium, High, Turbo
Timer Function	24-hour programmable on/off timer
Sleep Mode	Automatic temperature adjustment for comfort
Air Filter	Washable anti-bacterial filter
Remote Control	Full function remote with LCD display
Energy Efficiency	Energy Star certified
Noise Level	As low as 19 dB in quiet mode
Warranty	5 years on compressor, 1 year parts

Installation

Unpack and inspect contents. Choose appropriate location for installation.

Select installation location: Ensure proper clearance around unit (minimum 20 inches).
Install mounting bracket: Secure to wall studs using provided hardware.
Connect refrigerant lines: Follow manufacturer's instructions for proper connection.
Electrical connection: Connect to dedicated 15-amp circuit.
Drainage setup: Install drain hose with proper slope for water drainage.

WARNING! Installation should be performed by qualified technician. Improper installation may void warranty.

First-Time Setup

After installation, perform initial setup for optimal performance.

Power on unit: Plug into dedicated electrical outlet.
Remote control setup: Install batteries and pair with unit.
Initial settings: Set temperature, mode, and fan speed preferences.
Timer programming: Set daily operation schedule if desired.
Test all functions: Verify cooling, heating, and fan operations.

CAUTION! Allow unit to stabilize for 10 minutes after initial startup.

Specifications

Cooling Capacity: 12,000 BTU/h
Heating Capacity: 11,500 BTU/h
Power Supply: 115V, 60Hz
Power Consumption: 1080W (cooling), 1050W (heating)
Refrigerant: R410A
Noise Level: 19-38 dB
Air Flow: 350 CFM maximum
Dimensions (Indoor): 31.5" x 12.6" x 8.7"
Weight: 55.1 lbs
Operating Temperature: 60°F to 95°F (cooling), -5°F to 75°F (heating)

Controls and Settings

Access controls via remote or unit display panel. Front Panel: POWER, MODE, FAN SPEED, TEMPERATURE, TIMER.

Remote: POWER, MODE, TEMP UP/DOWN, FAN SPEED, TIMER, SLEEP, SWING, TURBO, DISPLAY.

Temperature: 60°F to 86°F adjustable in 1° increments. Fan Speed: Auto, Low, Medium, High, Turbo. Mode: Cool, Heat, Fan, Dry, Auto. Timer: 24-hour programmable. Sleep: Automatic temperature adjustment. Swing: Automatic louvers movement.

Operation Modes

Multiple operating modes for different comfort needs.

Cool Mode: Standard air conditioning operation
Heat Mode: Heating function for colder weather
Fan Mode: Air circulation without cooling/heating
Dry Mode: Dehumidification without significant cooling
Auto Mode: Automatic selection based on room temperature
Sleep Mode: Gradual temperature adjustment for nighttime comfort
Turbo Mode: Maximum cooling/heating for rapid temperature change

Tip: Use Auto mode for energy efficiency and consistent comfort.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Air Filter Cleaning: Clean every 2 weeks during peak usage
Outdoor Unit: Keep area clear of debris and vegetation
Indoor Unit: Wipe with soft, dry cloth
Drainage System: Check for clogs monthly
Seasonal Storage: Cover outdoor unit when not in use

CAUTION! Always disconnect power before performing any maintenance.

Energy Saving Tips

Maximize efficiency and reduce energy consumption.

Set temperature to 78°F during summer months
Use programmable timer to reduce operation when away
Keep windows and doors closed during operation
Clean filters regularly for optimal airflow
Use curtains or blinds to block direct sunlight
Ensure proper insulation in room
Service unit annually for peak performance

Regulatory Information

UL Listed: Complies with UL 484 standards. Energy Star Certified: Meets energy efficiency guidelines. EPA Refrigerant Compliance: Uses R410A refrigerant. Copyright © 2025 Fujiaire; all rights reserved. For technical support and warranty service, contact 1-800-FUJIAIRE or visit www.fujiaire.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Dirty filters/thermostat setting	Clean filters; check temperature setting; ensure proper power supply.
Water leakage	Clogged drain line	Clear drain line; ensure proper installation slope.
Unusual noises	Loose parts/fan obstruction	Check for loose components; clear fan area of obstructions.
Remote not working	Batteries/obstruction	Replace batteries; ensure clear line of sight to unit.
Unit not turning on	Power supply/timer setting	Check circuit breaker; verify timer is not active.
Poor cooling performance	Dirty coils/high ambient temp	Clean indoor and outdoor coils; check for proper ventilation.

Reset: Turn unit off for 5 minutes, then restart.

Service: 1-800-FUJIAIRE; www.fujiaire.com