Fuji Xerox DocuPrint P455d Manual

The Fuji Xerox DocuPrint P455d is a monochrome laser printer designed for office environments, featuring print speeds up to 45 ppm, 600x600 dpi resolution, automatic duplex printing, 512MB standard memory (expandable to 1GB), USB 2.0 and Ethernet connectivity, 350-sheet input capacity, and support for various paper types and sizes. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Network 7. Printing Operations 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with LCD display, paper trays, toner cartridge, USB and Ethernet ports, power switch.

Feature	Description
Print Speed	Up to 45 pages per minute
Resolution	600x600 dpi
Duplex Printing	Automatic two-sided printing
Memory	512MB standard (expandable to 1GB)
Connectivity	USB 2.0, Ethernet 10/100/1000Base-TX
Paper Capacity	350 sheets standard
Supported OS	Windows, Mac OS, Linux
Toner Cartridge	FX-ES315 (approx. 10,000 pages)
Drum Unit	FX-ES315DR (approx. 50,000 pages)
Power Consumption	Approx. 550W printing, 65W ready, 2.5W sleep

Installation

Unpack and inspect contents. Place on stable, level surface near power outlet.

Remove all packaging materials and tape from printer.
Install toner cartridge: Open front cover, remove cartridge from packaging, shake gently, insert until clicks.
Load paper: Adjust paper guides in tray, load paper face up.
Connect power cable and Ethernet/USB cable as needed.
Power on printer using rear switch.

WARNING! Toner powder may cause irritation; avoid inhalation and contact with skin. Keep printer away from moisture and heat sources.

First-Time Setup

Power on printer; follow initial setup procedure.

Install drivers: Use included CD or download from Fuji Xerox website.
Network configuration: Use control panel to set IP address or enable DHCP.
Print test page: Press and hold GO button for 3 seconds until all LEDs light.
Configure settings: Use control panel menu for paper size, sleep timer, etc.

CAUTION! Do not touch the green surface of the drum unit. Use provided handle when handling toner cartridge.

Specifications

Print Technology: Monochrome laser
Print Speed: Up to 45 ppm
First Print Out: Less than 8 seconds
Resolution: 600x600 dpi
Memory: 512MB DDR2 (expandable to 1GB)
Paper Handling: 350-sheet input capacity
Supported Media: Plain, recycled, heavy, labels, envelopes
Paper Sizes: A4, A5, B5, Letter, Legal, Executive
Interface: USB 2.0, Ethernet 10/100/1000Base-TX
Power Requirements: 220-240V AC, 50/60Hz
Dimensions: 400x453x335 mm (WxDxH)
Weight: Approx. 17.5 kg

Controls and Settings

Control Panel: LCD display, GO button, Attention LED, Data LED, Menu button, Up/Down arrows, OK button.

Menu Options: Paper, System, Network, Print Reports, Maintenance.

Paper Settings: Size, type, tray selection. System: Sleep timer, buzzer, language. Network: TCP/IP, WSD, protocol settings. Print Reports: Configuration page, supplies status. Maintenance: Cleaning mode, reset menu.

Connecting to Network

Ethernet connection for network sharing.

Connect Ethernet cable to printer and network router/switch.
Power on printer and wait for initialization.
Print configuration page to check IP address.
Install network driver on computers.
Add printer using IP address or network discovery.

Tip: Use static IP address for consistent network access in business environments.

Printing Operations

Supports various print jobs and media types.

Basic printing: Select printer in application, adjust properties as needed.
Duplex printing: Enable in printer properties for automatic two-sided printing.
Multiple copies: Set in print dialog box.
Envelope printing: Load in manual feed slot, select envelope media type.
Cancel print job: Press GO button briefly during printing.

WARNING! Do not open covers during printing. Allow printer to cool before maintenance.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Replace toner cartridge when low toner indicator appears.
Replace drum unit approximately every 50,000 pages.
Clean exterior with dry, soft cloth.
Clean interior with provided cleaning brush or dry cloth.
Run cleaning cycle from maintenance menu if print quality issues occur.

CAUTION! Use only genuine Fuji Xerox supplies. Dispose of used cartridges according to local regulations.

Regulatory Information

CE compliant, RoHS compliant. Energy Star qualified. Copyright © Fuji Xerox Co., Ltd. For support, visit www.fujixerox.com.au or contact local Fuji Xerox service center. This product may be protected by one or more patents. Waste electrical products should not be disposed of with household waste.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Printer not powering on	Power connection	Check power cable connection; ensure outlet is working.
Poor print quality	Toner/low supplies	Replace toner cartridge; run cleaning cycle; check drum unit.
Paper jams	Paper loading/media	Clear jammed paper; ensure paper is loaded correctly; check for obstructions.
Network connection issues	Cable/settings	Check Ethernet cable; verify IP address settings; restart router.
Printer not recognized	Driver/connection	Reinstall drivers; check USB cable; restart printer and computer.

Reset: Menu > System > Reset Settings if available.

Service: Contact authorized Fuji Xerox service provider or visit www.fujixerox.com.au