Fuji Xerox DocuPrint P115W Manual

The Fuji Xerox DocuPrint P115W is a compact monochrome laser printer with wireless connectivity, designed for home and small office use. It features fast printing speeds up to 20ppm, 150-sheet input capacity, USB 2.0 and Wi-Fi connectivity, mobile printing support, energy-saving modes, and automatic driver installation. Below are key sections for setup, features, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Compact laser printer, control panel with indicators, paper input tray, output tray, USB port, Wi-Fi connectivity.

Installation & Setup

Unpack and inspect contents. Remove all packaging materials.

1. Place printer on stable, flat surface near power outlet.
2. Install toner cartridge: Open front cover, remove packaging, insert cartridge until it clicks.
3. Load paper: Adjust paper guides, load up to 150 sheets of A4 paper.
4. Connect power cable and turn on printer.
5. Connect via USB or set up wireless connection.

WARNING! Do not touch the green drum surface of the toner cartridge. Keep printer away from heat and moisture.

First-Time Configuration

Power on printer; wait for ready indicator.

1. Install drivers: Use included CD or download from Fuji Xerox website.
2. Wireless setup: Press WPS button on router or use WLAN Direct setup.
3. Test print: Print configuration page to verify installation.
4. Configure settings: Access web interface for network settings.

CAUTION! Ensure proper ventilation around printer. Do not block air vents.

Specifications

• Print Technology: Monochrome laser
• Print Speed: Up to 20 ppm
• First Print Out: Less than 8.5 seconds
• Resolution: 1200 x 1200 dpi
• Memory: 64MB
• Paper Capacity: 150 sheets
• Supported Media: Plain paper, envelopes, labels, transparencies
• Connectivity: USB 2.0, Wi-Fi 802.11b/g/n
• Mobile Printing: Apple AirPrint, Google Cloud Print
• Power Requirements: 220-240V AC, 50/60Hz
• Operating Environment: 10-32°C, 20-80% humidity

Controls and Indicators

Control Panel: Power button, Wi-Fi indicator, Error indicator, Attention indicator.

Indicator Status: - Power: Solid green = Ready, Blinking green = Processing - Wi-Fi: Solid blue = Connected, Blinking blue = Connecting - Error: Red = Paper jam or cover open - Attention: Orange = Low toner or maintenance required

Software Controls: Print preferences, toner saving mode, duplex printing settings, network configuration.

Wireless Setup

Multiple methods for wireless connection setup.

1. WPS method: Press WPS button on router, then press Wi-Fi button on printer within 2 minutes.
2. Manual setup: Use WLAN Direct to connect device directly to printer.
3. Software setup: Run network setup from installation software.
4. Web interface: Access printer's IP address for advanced network settings.

Tip: Ensure printer and router are within range for stable connection.

Printing Operations

Supports various printing modes and media types.

1. Standard printing: Select printer from applications, adjust settings as needed.
2. Toner saving mode: Enable in print preferences to extend toner life.
3. Multiple copies: Set quantity in print dialog.
4. Special media: Adjust paper type setting for envelopes, labels, or transparencies.
5. Cancel print job: Press and hold power button for 2 seconds.

WARNING! Do not touch printed pages immediately after printing as they may be hot.

Mobile Printing

Print directly from mobile devices without computer.

1. Apple AirPrint: Connect iOS device to same Wi-Fi network as printer.
2. Google Cloud Print: Register printer through Google Cloud Print service.
3. Fuji Xerox Print Utility: Download app for Android devices.
4. Email printing: Configure through web interface if supported.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Cleaning: Use dry, lint-free cloth to clean exterior. Unplug before cleaning.
2. Toner replacement: Replace when indicator lights or print quality degrades.
3. Paper handling: Use recommended paper types, store paper in dry conditions.
4. Firmware updates: Check Fuji Xerox website for latest firmware.

CAUTION! Do not use alcohol or solvents for cleaning. Turn off and unplug before maintenance.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. CE marked for European compliance. RoHS compliant. Energy Star certified for energy efficiency. Copyright © Fuji Xerox Co., Ltd. For support, visit www.fujixerox.com or contact local Fuji Xerox service center.

Troubleshooting

Reset: Turn off printer, wait 30 seconds, turn back on.

Service: Contact Fuji Xerox support at local service center or www.fujixerox.com