Fuji Xerox DocuCentre SC2020 Manual

The Fuji Xerox DocuCentre SC2020 is a multifunction color printer/copier/scanner with print/copy speed up to 20ppm color and monochrome, 1200x1200 dpi resolution, automatic duplex printing, network connectivity, USB direct printing, scan to email/folder, and advanced security features. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Printing and Copying 8. Scanning Features 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Color LCD touch panel, paper trays, automatic document feeder, network interface, USB ports, toner cartridges.

Feature	Description
Print Speed	Up to 20ppm color and monochrome
Resolution	1200x1200 dpi
Paper Capacity	Standard 550 sheets, maximum 2150 sheets
Automatic Duplex	Two-sided printing and copying
Network Connectivity	Ethernet 10/100/1000BASE-T
USB Ports	USB 2.0 for direct printing and scanning
Scan Features	Scan to email, folder, USB
ADF Capacity	50 sheets automatic document feeder
Security Features	User authentication, secure print
Power Consumption	Energy Star compliant

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials and tape from device.
Install toner cartridges: Open front cover, remove protective tape, insert cartridges.
Load paper: Adjust paper guides in trays, load appropriate paper type.
Connect power cable: Use provided power cord, connect to grounded outlet.
Connect network cable: For network operation, connect Ethernet cable.

WARNING! Device is heavy; use two people for lifting. Ensure proper ventilation around device.

First-Time Setup

Power on device; follow initial setup wizard on touch panel.

Language selection: Choose preferred language for interface.
Network configuration: Set IP address or use DHCP for automatic assignment.
Date and time: Set current date, time, and time zone.
Administrator password: Set initial administrator password for device security.
Test print: Print configuration page to verify proper operation.

CAUTION! Do not interrupt initial setup process. Keep device powered during configuration.

Specifications

Print Technology: Laser electrophotography
Print Speed: Up to 20ppm (color and monochrome)
First Print Out Time: Less than 13 seconds
Resolution: 1200x1200 dpi
Memory: Standard 2GB, expandable
Paper Sizes: A4, A5, A6, B5, Letter, Legal, Executive
Paper Weight: 60-220 g/m²
Warm-up Time: Approx. 45 seconds from power on
Power Requirements: 220-240V AC, 50/60Hz
Dimensions: 520x520x570 mm (WxDxH)
Weight: Approx. 45 kg

Controls and Settings

Access functions via 7-inch color touch panel. Main Menu: Copy, Print, Scan, Fax, Settings.

Copy Settings: Number of copies, density, paper selection, duplex, reduction/enlargement, collage, cover sheet. Print Settings: Paper type, quality, duplex, watermark, secure print. Scan Settings: Resolution, file format, destination, file name. System Settings: Network, security, maintenance, user management.

Connecting Devices

Network: Ethernet port for LAN connection. USB: Direct printing and scanning. Wireless: Optional wireless adapter.

Turn off device before connecting cables.
Network connection: Connect Ethernet cable to router/switch.
USB connection: Connect computer USB port to device USB port.
Driver installation: Install device drivers from provided CD or download from website.

Tip: Use shielded network cables for better performance and interference protection.

Printing and Copying

Supports various paper types and sizes with automatic duplex capability.

Basic copying: Place document on glass or in ADF, select copy settings, press Start.
Advanced copying: ID card copy, booklet copy, poster copy, cover sheet.
Printing from computer: Select printer in application, adjust print settings, send print job.
Secure printing: Enter PIN at device to release print jobs.
Paper selection: Choose appropriate paper type and size for optimal results.

WARNING! Do not touch fuser unit; it becomes hot during operation. Allow to cool before maintenance.

Scanning Features

Scan to email, network folder, USB drive with various file formats.

Place document: On flatbed or in automatic document feeder.
Select scan destination: Email, folder, USB.
Adjust settings: Resolution (100-600 dpi), file format (PDF, JPEG, TIFF).
Start scanning: Press Start button on control panel.
Scan to email: Configure SMTP settings for email scanning.

Maintenance & Care

Regular maintenance ensures optimal performance and extends device lifespan.

Daily: Clean exterior with dry, soft cloth.
Weekly: Clean scanner glass and ADF rollers.
Monthly: Clean paper path and check for paper dust.
As needed: Replace toner cartridges and consumables.

CAUTION! Unplug device before cleaning. Use only approved cleaning materials.

Regulatory Information

CE Mark: Complies with European directives. Energy Star: Meets energy efficiency standards. RoHS: Complies with restriction of hazardous substances. For technical support, visit www.fujixerox.com or contact your local Fuji Xerox service center.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Paper jams	Incorrect paper loading	Follow screen instructions to clear jam; check paper guides.
Poor print quality	Toner low/dirty components	Replace toner; clean corona wire; run cleaning cycle.
Device not responding	Software issue	Restart device; check network connection; reinstall drivers.
Scanning issues	Network/destination settings	Verify network connection; check scan destination settings.
Toner messages	Low/empty toner	Replace indicated toner cartridge; reset toner counter.

Reset: System Settings > Maintenance > Reset to Factory Defaults if needed.

Service: Contact Fuji Xerox technical support or authorized service provider.