Fuji Xerox DocuCentre IV C3373 Manual

The Fuji Xerox DocuCentre IV C3373 is a multifunction color printer/copier/scanner/fax with print speeds up to 33ppm color/37ppm monochrome, 1200x1200 dpi resolution, automatic duplex printing, network connectivity, USB 2.0 interface, paper capacity of 2,350 sheets, and energy-saving features. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Printing and Copying 8. Scanning Features 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Color LCD touch panel, Automatic Document Feeder (ADF), Multiple paper trays, Network interface, USB ports, Toner cartridges (CMYK).

Feature	Description
Print Speed	Up to 33 ppm color, 37 ppm monochrome
Resolution	1200 x 1200 dpi
Paper Capacity	2,350 sheets maximum
Automatic Duplex	Two-sided printing standard
Network Connectivity	Ethernet 10/100/1000BASE-T
USB Interface	USB 2.0 for direct printing
ADF Capacity	100 sheets automatic document feeder
Scan Resolution	Up to 600 x 600 dpi
Fax Capability	Super G3 with memory for 500 pages
Energy Saving	Low power consumption mode

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials and tape from unit.
Install toner cartridges: Open front cover, insert CMYK cartridges in correct slots.
Load paper: Fill paper trays with appropriate paper types and sizes.
Connect power cable: Use provided power cord and plug into grounded outlet.
Connect network cable: For network operation, connect Ethernet cable.

WARNING! Machine is heavy; use two people for lifting. Ensure proper ventilation around unit.

First-Time Setup

Power on device; follow on-screen initialization prompts.

Language selection: Choose preferred language from touch panel.
Network configuration: Set IP address, subnet mask, and gateway if using network.
Date and time: Set current date and time for accurate job logging.
Admin password: Set administrator password for device security.
Test print: Print configuration page to verify proper operation.

CAUTION! Do not interrupt initial setup process. Allow device to complete initialization.

Specifications

Print Technology: Laser electrophotography
First Print Out Time: Less than 8.5 seconds
Memory: Standard 1GB, expandable to 2GB
Hard Drive: 160GB standard
Supported Media: Plain paper, heavy paper, labels, transparencies, envelopes
Media Sizes: A3, A4, A5, B4, B5, Letter, Legal, Executive
Warm-up Time: Less than 45 seconds from power save mode
Power Consumption: 1.5kW max, 150W standby, 60W power save
Dimensions: 622 x 677 x 875 mm (W x D x H)
Weight: Approximately 92 kg

Controls and Settings

Access functions via 8.5-inch color touch panel. Main Menu: Copy, Print, Scan, Fax, System Settings.

Control Panel: Power button, Numeric keypad, Start/Stop, Clear, Help, Energy Saver.

Copy Settings: Number of copies, density, paper selection, zoom, duplex, sort/stack. Print Settings: Resolution, paper type, color mode, watermark, booklet printing. System Settings: Network configuration, security, user management, maintenance, defaults. Scan Settings: Resolution, file format (PDF, TIFF, JPEG), destination, file naming.

Connecting Devices

Network: Ethernet port for LAN connection. USB: USB 2.0 for direct computer connection. Telephone: For fax functionality.

Turn off device before making connections.
Network: Connect Ethernet cable to router/switch.
Computer: Install printer drivers from provided CD or download from website.
Fax: Connect telephone line to LINE port.

Tip: Use shielded cables for network connections to reduce interference.

Printing and Copying

Supports various print and copy functions with quality adjustments.

Basic copying: Place original, select copy settings, press Start.
Advanced copying: Use ADF for multiple pages, duplex copying, reduction/enlargement.
Network printing: Select printer from computer applications, adjust print properties.
Direct printing: Print from USB storage devices.
Secure printing: Require PIN for sensitive document release.
Booklet printing: Automatic imposition for booklet creation.
Poster printing: Divide large images across multiple pages.

WARNING! Do not use damaged or curled originals in ADF. Keep hands clear of paper path during operation.

Scanning Features

Scan to email, network folder, USB, or fax. Resolution up to 600 dpi.

Place document: On platen or in ADF.
Select scan destination: Email, folder, USB, or computer.
Adjust settings: Resolution, file format, color mode.
Start scan: Press Start button or send from computer.
OCR capability: Convert scanned documents to editable text.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

Replace toner: When low toner indicators appear.
Clean exterior: Use soft, dry cloth; avoid chemicals.
Clean interior: Follow manual instructions for cleaning rollers and components.
Replace consumables: Imaging units, fuser, transfer belt as needed.
Update firmware: Check for latest firmware updates regularly.

CAUTION! Unplug device before cleaning interior. Use only approved consumables.

Regulatory Information

CE, Energy Star, RoHS compliant. FCC Part 15 Class B digital device. Copyright © Fuji Xerox Co., Ltd. For technical support, visit www.fujixerox.com or contact your local authorized service provider. Waste electrical products should not be disposed of with household waste.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Paper jams	Incorrect paper loading or worn rollers	Clear jammed paper following display instructions; check paper condition.
Poor print quality	Low toner or dirty components	Replace toner cartridges; run cleaning cycle; check print density settings.
Network connection issues	Incorrect settings or cable problems	Verify network settings; check cables; restart device and router.
Scanner not working	Driver issues or connection problems	Reinstall scanner drivers; check USB/network connections.
Error codes displayed	Various hardware/software issues	Refer to error code list in manual; contact service if persistent.

Reset: System Settings > Maintenance > Reset to Factory Defaults if needed.

Service: Contact authorized Fuji Xerox service provider; www.fujixerox.com