fuji stx 2 manual

The Fuji STX-2 is a 35mm film SLR camera featuring manual exposure control, through-the-lens (TTL) metering, interchangeable lenses, hot shoe for flash, self-timer, depth-of-field preview, and multiple exposure capability. Below are key sections for camera overview, features, operation, lens compatibility, maintenance, and troubleshooting.

Features at a Glance

Key components: Manual SLR body, TTL metering system, Fujica X-mount lens system, Hot shoe, Self-timer, Multiple exposure lever.

Feature	Description
Shutter speed dial	B, 1-1/700 sec with mechanical control
TTL metering	Through-the-lens center-weighted metering
Film advance lever	Single-stroke with 30° standoff position
Self-timer	Mechanical timer with 10-second delay
Hot shoe	For accessory flash units
Depth-of-field preview	Manual preview button
Multiple exposure	Dedicated lever for multiple exposures
Battery check	LED indicator for battery status
Film rewind crank	Fold-out crank for film rewinding
Viewfinder	Split-image focusing with microprism collar

Camera Overview

Unpack and inspect contents. Remove protective caps.

1. Battery installation: Open battery compartment, insert two 1.5V silver oxide batteries.
2. Lens mounting: Align red dot on lens with camera mount, rotate clockwise until click.
3. Film loading: Open back cover, insert film cartridge, pull leader to take-up spool.
4. Camera strap: Attach to strap lugs on both sides of camera body.

WARNING! Do not force lens mounting; ensure proper alignment. Keep camera dry and away from magnetic fields.

First-Time Setup

Prepare camera for first use with film and batteries.

1. Install batteries: Check polarity; ensure fresh batteries for accurate metering.
2. Load film: Open back, insert 35mm film, advance to frame 1.
3. Set film speed: Adjust ISO dial to match film speed (25-1600 ISO).
4. Test functions: Check shutter, advance lever, and meter response.
5. Attach lens: Mount preferred Fujica X-mount lens securely.

CAUTION! Handle camera with clean hands; avoid touching mirror and shutter mechanism.

Specifications

• Camera Type: 35mm manual focus SLR
• Lens Mount: Fujica X-mount
• Shutter: Horizontal travel focal-plane, 1-1/700 sec + B
• Metering: TTL center-weighted with CdS cells
• Film Speed: ISO 25-1600
• Viewfinder: 0.87x magnification, 92% coverage
• Flash Sync: 1/60 sec with hot shoe and PC sync
• Battery: Two 1.5V silver oxide (PX625 type)
• Weight: 560g (body only)
• Dimensions: 139 x 90 x 86 mm

Controls and Settings

Top plate controls: Shutter speed dial, Film advance lever, Frame counter, Hot shoe.

Front controls: Lens release button, Self-timer lever, Depth-of-field preview, Multiple exposure lever.

Exposure control: Set shutter speed (1-1/700 + B), match needle in viewfinder for proper exposure. Film advance: Single-stroke lever advances film and cocks shutter. Self-timer: Mechanical timer with 10-second delay. Multiple exposure: Hold lever while advancing film for multiple exposures on same frame.

Lens Compatibility

Fujica X-mount lenses: Compatible with all Fujinon X-mount lenses.

1. Standard lenses: 55mm f/1.8, 50mm f/1.4
2. Wide angle: 28mm f/3.5, 35mm f/2.8
3. Telephoto: 135mm f/2.8, 200mm f/4.5
4. Zoom lenses: 43-75mm f/3.5-4.5, 75-150mm f/4.5

Tip: Ensure lens is set to minimum aperture before mounting for proper meter coupling.

Shooting Techniques

Manual exposure control with TTL metering guidance.

1. Meter reading: Point camera at subject; match needles in viewfinder.
2. Focus: Use split-image rangefinder for critical focus.
3. Composition: Utilize 92% viewfinder coverage for framing.
4. Depth-of-field: Press preview button to check depth of field.
5. Multiple exposure: Use ME lever for creative multiple exposures.
6. Long exposure: Use B setting with cable release for time exposures.
7. Self-timer: Engage lever for delayed shutter release.
8. Film advance: Smooth single-stroke action to next frame.

WARNING! Do not point camera directly at sun through lens; may damage shutter.

Flash Photography

Hot shoe and PC sync terminal for flash units. Sync speed: 1/60 sec maximum.

1. Dedicated flash: Use Fujica dedicated flash units for automatic exposure.
2. Manual flash: Set shutter to 1/60 sec; calculate aperture based on guide number.
3. PC sync: Use PC cord for studio flash units.
4. Flash ready: Check flash ready light in viewfinder (with dedicated flash).

Care & Maintenance

Store in dry, cool place with silica gel. Clean with soft brush and lens tissue only.

CAUTION! Do not use alcohol or solvents on camera body. Keep away from sand and dust.

Warranty Information

Fuji Photo Film Co., Ltd. provides 1-year limited warranty from date of purchase. Warranty covers manufacturing defects in materials and workmanship. For service, contact authorized Fuji service centers. Keep original receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Meter not working	Dead batteries/lens not coupled	Replace batteries; ensure lens at minimum aperture.
Shutter not firing	Film not advanced/battery	Advance film fully; check battery contact.
Film advance stuck	Film loading error	Check film leader position; rewind if necessary.
Blurry images	Camera shake/focus error	Use faster shutter speed; check focus carefully.
Light leaks	Back seal damaged	Replace light seals; store camera properly.

Service: Authorized Fuji service centers only. Do not attempt self-repair.

Support: Contact local Fuji distributor for technical assistance.