Fuji S9500 Manual

The Fuji S9500 is a high-performance digital camera featuring 9.0 megapixels, 10.7x optical zoom, manual controls, image stabilization, multiple shooting modes, and advanced image processing. Below are key sections covering camera features, setup, operation, settings, maintenance, and troubleshooting.

Key Features

Main features: 9.0MP Super CCD HR, 10.7x optical zoom (28-300mm equivalent), manual zoom ring, image stabilization, 1.8-inch LCD monitor, electronic viewfinder, and multiple exposure modes.

Feature	Description
Image Sensor	9.0 megapixel Super CCD HR
Zoom Range	10.7x optical zoom (28-300mm equivalent)
LCD Monitor	1.8-inch tiltable LCD screen
Viewfinder	Electronic viewfinder (EVF)
Image Stabilization	Anti-blur system for sharp images
Shooting Modes	Auto, Program, Aperture Priority, Shutter Priority, Manual
Storage	xD-Picture Card and CompactFlash support
Power Source	4x AA batteries or AC adapter
Connectivity	USB 2.0, video output
Flash	Built-in pop-up flash with hot shoe

Camera Components

Front: Lens barrel with manual zoom ring, built-in flash, focus assist lamp. Top: Mode dial, shutter button, power switch, command dial. Rear: LCD monitor, control buttons, viewfinder. Side: Port covers for USB, DC input, video output.

1. Lens: Fujinon 10.7x optical zoom lens with manual zoom ring
2. Mode Dial: Select shooting modes (Auto, P, A, S, M, Scene)
3. Shutter Button: Half-press to focus, full press to capture
4. LCD Monitor: 1.8-inch display for composition and playback
5. Control Buttons: Menu, display, playback, navigation keys
6. Battery Compartment: Holds 4 AA batteries
7. Memory Card Slots: xD-Picture Card and CompactFlash

NOTE: Handle lens carefully; keep lens cap on when not in use.

Initial Setup

Prepare camera for first use by installing batteries and memory card.

1. Install batteries: Open compartment, insert 4 AA batteries observing polarity
2. Insert memory card: Choose xD or CF card, insert into appropriate slot
3. Set date/time: Press MENU, navigate to setup menu, set date and time
4. Format memory card: In setup menu, select format to prepare card
5. Attach wrist strap: For secure handling during use

CAUTION! Use recommended batteries; format card only when empty or backed up.

Basic Operation

Power on camera and start shooting immediately.

1. Turn on: Slide power switch to ON position
2. Select mode: Turn mode dial to AUTO for automatic shooting
3. Compose: Use LCD or viewfinder to frame your shot
4. Focus: Half-press shutter button until focus confirmation
5. Capture: Fully press shutter button to take photo
6. Review: Press playback button to view captured images

Tip: Keep camera steady; use both hands for better stability.

Shooting Modes

• Auto Mode: Camera sets all parameters automatically
• Program (P): Auto exposure with flexibility to adjust other settings
• Aperture Priority (A): Set aperture, camera selects shutter speed
• Shutter Priority (S): Set shutter speed, camera selects aperture
• Manual (M): Full control over aperture and shutter speed
• Scene Modes: Portrait, Landscape, Sports, Night, etc.
• Movie Mode: Record video with sound

Use mode dial to select desired shooting mode for different situations.

Advanced Settings

Access camera menu for detailed configuration options.

Image Quality: Fine, Normal, Basic compression levels; RAW format available

White Balance: Auto, Daylight, Cloudy, Fluorescent, Incandescent, Custom

ISO Sensitivity: 80, 100, 200, 400, 800, 1600, Auto

Focus Modes: Single AF, Continuous AF, Manual focus

Metering: Multi-pattern, Spot, Average

Flash Modes: Auto, Red-eye reduction, Forced, Suppressed, Slow sync

Press MENU button to access these settings and customize camera behavior.

Playback & Transfer

Review images and transfer to computer.

1. Playback: Press playback button to view captured images
2. Navigate: Use arrow keys to browse through images
3. Zoom: Use zoom buttons to examine image details
4. Delete: Press trash button to remove unwanted images
5. Connect to PC: Use USB cable to transfer images to computer
6. Video output: Connect to TV using video cable for slideshow viewing

WARNING! Do not disconnect USB cable during transfer to avoid data corruption.

Maintenance

Proper care ensures long camera life and optimal performance.

Cleaning: Use soft cloth for body and LCD; lens cleaning paper for lens surface

Storage: Remove batteries for long-term storage; store in cool, dry place

Lens Protection: Always use lens cap when camera not in use

Battery Care: Remove batteries if camera won't be used for extended period

CAUTION! Do not use harsh chemicals or compressed air on lens surface.

Specifications

• Image Sensor: 9.0 megapixel Super CCD HR
• Lens: Fujinon 10.7x optical zoom, f/2.8-4.9
• Focal Length: 28-300mm (35mm equivalent)
• LCD Monitor: 1.8-inch, 118,000 pixels
• Storage: xD-Picture Card, CompactFlash (Microdrive compatible)
• Power: 4x AA batteries or AC adapter
• Dimensions: 128 x 93 x 129 mm
• Weight: 645g (without batteries and memory card)
• Interface: USB 2.0, video output (NTSC/PAL)

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera won't turn on	Dead batteries	Replace with fresh batteries; check polarity
Blurry images	Camera shake/focus issue	Use image stabilization; ensure proper focus; use tripod
Memory card error	Card not formatted	Format card in camera; check card compatibility
Flash not working	Flash disabled	Check flash mode setting; ensure flash is popped up
Battery drains quickly	Old batteries/LCD use	Use recommended batteries; reduce LCD usage
Cannot transfer images	Driver/connection issue	Install camera drivers; try different USB port/cable

Reset: Remove batteries for 30 seconds to reset camera settings.

Service: Contact authorized Fuji service center for technical support.