Fuji S5100 Manual

The Fuji S5100 is a 4.0-megapixel digital camera with 10x optical zoom, electronic viewfinder, 1.5-inch LCD screen, manual exposure controls, macro mode, movie recording, built-in flash, USB connectivity, and uses 4 AA batteries. Below are key sections for camera overview, basic operations, shooting modes, settings, playback, connectivity, maintenance, and troubleshooting.

1. Camera Overview 2. Basic Operations 3. Shooting Modes 4. Technical Specifications 5. Camera Settings 6. Playback Functions 7. Connecting to Computer 8. Maintenance & Care 9. Warranty Information 10. Troubleshooting

Camera Overview

Key components: Lens with 10x optical zoom, Electronic Viewfinder, LCD Monitor, Mode Dial, Flash, Power Button, Shutter Button, Zoom Control.

Component	Description
Lens	10x optical zoom, f=6.3-63mm
Viewfinder	Electronic viewfinder with diopter adjustment
LCD Monitor	1.5-inch TFT color LCD
Mode Dial	Selects shooting modes (Auto, Manual, Scene, etc.)
Flash	Built-in pop-up flash with multiple modes
Power Button	Turns camera on/off
Shutter Button	Half-press to focus, full press to capture
Zoom Control	Adjusts optical and digital zoom
Four-way Controller	Navigates menus and adjusts settings
Battery Compartment	Holds 4 AA batteries

Basic Operations

Getting started with your Fuji S5100 camera.

Install batteries: Open compartment, insert 4 AA batteries with correct polarity.
Insert memory card: Use xD-Picture Card (up to 1GB supported).
Turn on camera: Press POWER button; LED indicator lights.
Set date/time: Follow on-screen prompts during first use.
Basic shooting: Point camera, half-press shutter to focus, full press to capture.

WARNING! Do not force memory card; ensure proper orientation. Use recommended batteries only.

Shooting Modes

Select shooting modes using the Mode Dial.

Auto Mode: Camera sets all parameters automatically.
Manual Mode: Adjust shutter speed and aperture manually.
Scene Modes: Portrait, Landscape, Sports, Night, etc.
Movie Mode: Record video with sound (up to 60 seconds).
Macro Mode: For close-up photography (10cm minimum distance).

Tip: Use tripod for low-light conditions and long exposures.

Technical Specifications

Image Sensor: 4.0 megapixels CCD
Lens: 10x optical zoom (6.3-63mm equivalent to 38-380mm)
LCD Monitor: 1.5-inch TFT color, 115,000 pixels
Storage: xD-Picture Card (16MB-1GB)
File Formats: JPEG (still), AVI (movie)
Focus Range: Normal: 60cm-infinity, Macro: 10cm-80cm
Flash Modes: Auto, Red-eye Reduction, Forced, Suppressed, Slow Sync
Power Source: 4 AA batteries (alkaline or Ni-MH recommended)
Interface: USB 1.1, Video Out
Dimensions: 113 x 81 x 79 mm
Weight: 337g (without batteries and memory card)

Camera Settings

Access settings via MENU button and Four-way Controller.

Image Quality: Fine, Normal, Basic resolution settings

White Balance: Auto, Daylight, Cloudy, Fluorescent, Incandescent

ISO Sensitivity: Auto, 64, 100, 200, 400

Exposure Compensation: ±2.0 EV in 1/3 steps

Flash Settings: Auto, Red-eye Reduction, Forced Flash, No Flash, Slow Sync

Self-Timer: 2-second or 10-second delay

Date/Time: Set and display options

Playback Functions

Press PLAYBACK button to view captured images and videos.

Single image view: Use left/right arrows to navigate.
Thumbnail view: Display 9 images simultaneously.
Zoom: Magnify images up to 4x for detailed viewing.
Slide show: Automatic playback of all images.
Delete: Remove single or all images from memory card.
Protect: Lock important images from accidental deletion.

Note: Protected images cannot be deleted until protection is removed.

Connecting to Computer

Transfer images to computer via USB connection.

Install software: Use included CD with FinePix Viewer.
Connect camera: Use USB cable to computer USB port.
Set camera to PC mode: Camera will be recognized as removable drive.
Transfer files: Drag and drop or use software to copy images.
Safely disconnect: Use computer's safe removal procedure.

Tip: Ensure camera batteries are fully charged before transferring files.

Maintenance & Care

Proper maintenance ensures long camera life.

Cleaning lens: Use lens cleaning paper and blower brush.
Cleaning body: Use soft, dry cloth; avoid chemicals.
Storage: Store in cool, dry place with lens cap on.
Battery care: Remove batteries if not using for extended periods.
Memory card: Format in camera regularly for optimal performance.

CAUTION! Do not expose to extreme temperatures, moisture, or sand.

Warranty Information

Fuji S5100 comes with 1-year limited warranty. Warranty covers manufacturing defects but not accidental damage, misuse, or normal wear. For warranty service, contact authorized Fujifilm service center with proof of purchase. Keep original packaging for shipping if service required.

Troubleshooting

Problem	Possible Cause	Solution
Camera won't turn on	Dead batteries	Replace with fresh AA batteries
Blurry images	Camera shake or focus issue	Use tripod; ensure proper focus; clean lens
Memory card error	Card not inserted properly or corrupted	Reinsert card; format in camera; try different card
Flash not working	Flash setting or battery level	Check flash mode; ensure adequate battery power
Computer not recognizing camera	Driver issues or USB connection	Reinstall software; try different USB port; check cable
Battery drains quickly	Old batteries or heavy usage	Use recommended batteries; minimize LCD use

Reset: Remove batteries for 30 seconds to reset camera settings.

Support: Contact Fujifilm customer service at 1-800-800-FUJI or visit www.fujifilm.com