Fuji S5 Pro Manual

The Fuji S5 Pro is a professional digital SLR camera featuring Fujifilm's Super CCD SR Pro sensor with 12.3 million effective pixels, Nikon F-mount compatibility, dual image processing engines, advanced film simulation modes, wide dynamic range capabilities, and robust magnesium alloy body. Below are key sections for camera overview, features, setup, operation, and maintenance.

1. Features at a Glance 2. Camera Setup 3. Basic Operation 4. Specifications 5. Controls and Functions 6. Shooting Modes 7. Image Quality Settings 8. Custom Functions 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Super CCD SR Pro sensor, Nikon F-mount, dual processors, film simulation modes, wide dynamic range, magnesium alloy body.

Feature	Description
Sensor	Super CCD SR Pro with 12.3 million effective pixels
Lens Mount	Nikon F-mount (AF-D/G type compatible)
Image Processing	Dual RP Processor Pro engines
Dynamic Range	Up to 400% wider than conventional sensors
Film Simulation	F1-F5 modes including Velvia, Provia, Astia
ISO Range	100-3200 (expandable to 50-6400)
Shutter Speed	30-1/8000 sec plus Bulb
Storage	Dual CF card slots
LCD Monitor	2.5-inch 235,000 pixels
Power Source	EN-EL4a lithium-ion battery

Camera Setup

Unpack and inspect contents. Prepare camera for first use.

Insert battery: Open battery compartment, insert EN-EL4a battery.
Insert memory cards: Load CF cards into both slots.
Attach lens: Remove body/lens caps, align mount marks, rotate clockwise.
Charge battery: Use MH-21 charger for initial charge (approx 2.5 hours).

WARNING! Do not force lens mount; handle with care to avoid damage.

Basic Operation

Power on camera; configure initial settings.

Set date/time: Press MENU, navigate to setup menu, set clock.
Select image quality: Choose RAW, JPEG, or RAW+JPEG combinations.
Choose film simulation: Select F1-F5 modes for desired color rendering.
Set dynamic range: Choose AUTO, 100%, 200%, or 400% WDR.

CAUTION! Format memory cards in camera before first use.

Specifications

Sensor Type: Super CCD SR Pro (23.0 x 15.5 mm)
Effective Pixels: 12.3 million (S-pixels: 6.17 million, R-pixels: 6.17 million)
Image Processor: Dual RP Processor Pro
ISO Sensitivity: 100-3200 (50-6400 with expansion)
Shutter: 30-1/8000 sec, Bulb, 1/250 sec sync speed
Metering: 3D Color Matrix II, Center-weighted, Spot
Autofocus: Nikon Multi-CAM 1000 with 11 points
Viewfinder: Pentaprism, 95% coverage, 0.94x magnification
Storage: Dual CompactFlash Type I/II, Microdrive compatible
Connectivity: USB 2.0, Video out, DC in

Controls and Functions

Main controls: Mode dial, Command dial, Function button, AF-ON, Multi-selector.

Top Panel: Power switch, Mode dial, Shutter release, Exposure compensation, Metering mode, LCD panel.

Rear Controls: Playback, Menu, OK, Multi-selector, AF-ON, Function button, Protect/Help, Zoom in/out.

Shooting Settings: Mode dial (P,S,A,M), Drive mode (Single, Continuous, Self-timer), Focus mode (AF-S, AF-C, MF), Metering (Matrix, Center, Spot). Custom Functions: 48 custom settings for personalized operation.

Shooting Modes

Program Auto (P): Camera sets shutter and aperture. Shutter Priority (S): User sets shutter speed. Aperture Priority (A): User sets aperture. Manual (M): User controls all exposure settings.

Select mode via Mode dial.
Adjust parameters using Command dial.
Check exposure via viewfinder/LCD display.
Press shutter halfway to focus, fully to capture.

Tip: Use exposure compensation for quick brightness adjustments.

Image Quality Settings

Film Simulation Modes: F1 (Standard), F1a (Standard Astia), F2 (Portrait), F3 (Velvia/Vivid), F4 (Velvia Soft), F5 (B&W with filter effects).

Access via MENU > Shooting menu > Film Simulation.
Select desired mode for color characteristics.
Combine with Dynamic Range settings for optimal results.
Use Custom Settings to save preferred combinations.

WARNING! Film simulation affects JPEG only; RAW files retain original data.

Custom Functions

48 custom functions for personalized operation including button assignments, AF settings, display options, and operational preferences.

Care & Maintenance

Remove battery before cleaning. Use blower for sensor cleaning; professional service recommended for sensor cleaning. Store in dry, cool place with desiccant.

CAUTION! Do not touch sensor surface; avoid moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2006-2007 Fujifilm; all rights reserved. For technical support, visit www.fujifilm.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera won't power on	Battery/connections	Check battery charge; ensure proper insertion; try alternate battery.
No autofocus	Lens/switch settings	Ensure lens AF/MF switch set to AF; check lens compatibility.
Error messages	Card/memory issues	Reformat memory card; try different card; check contacts.
Poor image quality	Settings/lens issues	Check focus; verify ISO settings; clean lens elements.
Slow operation	Processing/buffer full	Allow buffer to clear; use faster CF cards; reduce image quality.

Reset: Two-button reset (Playback + Menu) or menu reset option.

Service: Contact authorized Fujifilm service centers for repairs.