Fuji Prima T2 User Manual

The Fuji Prima T2 is a compact 35mm film camera with automatic exposure control, built-in flash, auto focus system, film auto loading and advance, date imprint function, and self-timer. Powered by two AA batteries. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading Film 7. Taking Photos 8. Flash Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 35mm film camera body, built-in flash, auto focus lens, film compartment, battery chamber, LCD display panel.

FeatureDescription
Lens35mm f/4.5 fixed focus lens
FocusAuto focus system with focus lock
ExposureAutomatic exposure control
FlashBuilt-in automatic flash
Film TransportAutomatic film loading and advance
ViewfinderBright frame viewfinder
LCD PanelDisplays frame counter and battery status
Self-Timer10-second delay with indicator
Date ImprintOptional date/time stamp on photos
Power SourceTwo AA batteries

Installation

Unpack and inspect contents. Prepare camera for use.

  1. Install batteries: Open battery compartment, insert two AA batteries with correct polarity.
  2. Load film: Open back cover, insert 35mm film cartridge.
  3. Close back cover: Ensure it clicks securely into place.
  4. Advance film: Camera will automatically advance to first frame.

WARNING! Do not force battery compartment or film door. Handle with care to avoid damage.

First-Time Setup

Power on camera; check basic functions.

  1. Set date/time: Use mode button and set dial to configure date imprint.
  2. Test flash: Press flash button to verify operation.
  3. Check film loading: Ensure film advances properly to frame 1.
  4. Verify focus: Test auto focus on subjects at different distances.

CAUTION! Keep camera away from water and extreme temperatures.

Specifications

Controls and Settings

Main controls: Shutter button, mode button, flash button, self-timer, LCD display.

Front Panel: Lens, viewfinder, flash window, self-timer indicator.

Top Panel: Shutter button, mode button, LCD display.

Back Panel: Viewfinder eyepiece, film counter window.

Settings: Date imprint (On/Off/Date/Time), flash modes (Auto/On/Off), self-timer activation, film rewind.

Loading Film

Use standard 35mm film cartridges.

  1. Open back cover: Slide latch and open camera back.
  2. Insert film: Place film cartridge in chamber, pull film leader to red mark.
  3. Close back cover: Ensure secure closure.
  4. Auto advance: Camera automatically advances to frame 1.
  5. Check counter: Verify frame counter shows "1".

Tip: Handle film by edges only to avoid fingerprints.

Taking Photos

Basic photography operation.

  1. Compose: Look through viewfinder and frame your subject.
  2. Focus: Half-press shutter button to activate auto focus.
  3. Exposure: Camera automatically sets exposure.
  4. Shoot: Fully press shutter button to take photo.
  5. Advance: Camera automatically advances to next frame.
  6. Flash: Automatic flash fires in low light conditions.
  7. Self-timer: Press self-timer button for delayed shooting.

WARNING! Do not open back cover while film is loaded.

Flash Operation

Built-in automatic flash system.

  1. Auto mode: Flash fires automatically in low light.
  2. Flash on: Force flash for fill-in lighting.
  3. Flash off: Disable flash for natural light photography.
  4. Red-eye reduction: Pre-flash reduces red-eye effect.

Flash range: 1m to 3m (ISO 100 film).

Care & Maintenance

Remove batteries before extended storage. Clean with soft, dry cloth only.

CAUTION! Do not use solvents or abrasive cleaners. Store in cool, dry place.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2006 Fuji Photo Film Co., Ltd. For support, visit www.fujifilm.com or contact authorized service centers.

Troubleshooting

SymptomPossible CauseCorrective Action
Camera doesn't power onDead batteriesReplace with fresh AA batteries.
Film doesn't advanceImproper loadingReload film ensuring leader reaches mark.
Flash doesn't fireFlash off modeSet flash to auto or on mode.
Blurry photosCamera movementHold camera steady; use faster shutter speeds.
Film rewind issuesBattery powerCheck battery level; manual rewind if needed.

Reset: Remove batteries for 30 seconds to reset electronic functions.

Service: Contact authorized Fuji service centers for repairs.

Fuji Prima T2 User Manual © - All Rights Reserved 2025