Fuji Prima T2 Manual

The Fuji Prima T2 is a compact point-and-shoot film camera featuring a 35mm f/3.5 lens, automatic film loading/advancing/rewinding, built-in flash with auto activation, auto exposure control, focus-free operation (1.2m to infinity), film speed detection (DX-coded ISO 100-400), low-light warning indicator, battery check, and tripod socket. Powered by two AA batteries. Below are key sections for safety, features, operation, film handling, flash usage, maintenance, and troubleshooting.

1. Features at a Glance 2. Camera Overview 3. Loading Film 4. Taking Photos 5. Flash Operation 6. Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty Information

Features at a Glance

Key components: 35mm f/3.5 fixed focus lens, built-in automatic flash, film transport system, viewfinder, battery compartment, tripod socket.

Feature	Description
Lens	35mm f/3.5 fixed focus (1.2m to infinity)
Film Transport	Automatic loading, advancing, and rewinding
Exposure Control	Automatic program AE
Flash	Built-in automatic flash (auto activation in low light)
Film Speed	DX-coded ISO 100-400 automatic detection
Viewfinder	Optical viewfinder with frame lines
Power Source	Two AA batteries
Film Counter	Automatic resetting counter
Battery Check	LED indicator for battery status
Tripod Socket	Standard 1/4-inch tripod mount

Camera Overview

Familiarize yourself with camera controls and indicators.

Front: Lens, viewfinder, flash window, battery compartment latch
Top: Shutter button, film counter window, flash ready light
Back: Film compartment door, viewfinder eyepiece, film confirmation window
Bottom: Tripod socket, rewind button

WARNING! Do not open film compartment door while film is loaded. Avoid touching lens surface.

Loading Film

Ensure camera is off before loading film.

Open back cover: Slide latch and open film compartment.
Insert film: Place 35mm film cartridge in left chamber, pull film leader to right take-up spool.
Close back: Ensure film is properly engaged; close back cover securely.
Auto advance: Camera automatically advances to frame 1.

CAUTION! Load film in shaded area; avoid direct sunlight. Ensure film is properly seated.

Taking Photos

Power: Camera turns on when shutter button is pressed halfway.
Composition: Use viewfinder to frame subject within frame lines.
Focus: Fixed focus from 1.2m to infinity - no manual focusing required.
Exposure: Automatic exposure control adjusts shutter speed and aperture.
Flash: Automatically activates in low-light conditions.
Film Advance: Automatic after each exposure.
Rewinding: Automatically rewinds film when roll is complete.

Flash Operation

Built-in flash provides automatic illumination in low-light situations.

Auto Flash: Flash automatically pops up and charges when light is insufficient. Flash ready indicator lights when charged.

Flash Range: Effective range approximately 1.2m to 3.0m with ISO 100 film.

Recycling Time: Approximately 4-6 seconds with fresh batteries.

Tip: For best results, ensure subjects are within flash range and avoid reflective surfaces.

Specifications

Lens: 35mm f/3.5, 3 elements in 3 groups
Focus: Fixed focus (1.2m to infinity)
Shutter: Programmed electronic shutter
Shutter Speed: 1/125 sec (flash) to 1/250 sec (daylight)
Exposure Control: Program AE with CdS meter
Film Speed: DX-coded ISO 100-400
Flash: Built-in automatic flash (GN 10 at ISO 100)
Viewfinder: Reverse Galilean type with frame lines
Power Source: Two AA batteries (alkaline recommended)
Battery Life: Approximately 10 rolls of 24-exposure film
Dimensions: 120mm × 65mm × 45mm
Weight: 200g (without batteries)

Care & Maintenance

Remove batteries before extended storage. Use soft cloth to clean exterior.

Lens cleaning: Use lens brush or blower to remove dust; use lens tissue for smudges.
Battery replacement: Replace both AA batteries when performance decreases.
Storage: Store in cool, dry place with batteries removed.
Avoid: Extreme temperatures, humidity, sand, and direct sunlight.

CAUTION! Do not use solvents or abrasive cleaners. Never disassemble camera.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera not working	Dead batteries	Replace both AA batteries with fresh ones.
Flash not firing	Recycling/obstruction	Wait for flash to charge; ensure flash window is clear.
Film not advancing	Battery/loading issue	Check batteries; ensure film is properly loaded.
Blurry photos	Subject too close	Ensure subject is at least 1.2m from camera.
Dark photos	Low light without flash	Use flash in low-light conditions; ensure flash activates.
Film not rewinding	Battery issue	Replace batteries; manual rewind if necessary.

Service: Contact authorized Fuji service center for repairs.

Warranty Information

Fuji Prima T2 comes with 1-year limited warranty covering manufacturing defects. Warranty does not cover damage from misuse, accidents, or unauthorized repairs. For warranty service, contact authorized Fuji dealers with proof of purchase. For support, visit www.fujifilm.com or contact customer service at 1-800-800-FUJI.