Fuji JV100 Manual

The Fuji JV100 is a high-performance digital imaging device designed for professional photo printing applications. It features advanced inkjet technology, multiple media handling capabilities, color management system, network connectivity options, and user-friendly interface. Below are key sections covering safety guidelines, technical specifications, operation procedures, maintenance, and troubleshooting.

Product Overview

Key components: Print head assembly, Ink supply system, Media feed mechanism, Control panel, Network interface, Power supply unit.

Component	Description
Print Head	High-resolution piezoelectric print head
Ink System	8-color pigment ink configuration
Media Feed	Automatic roll media feeder with cutter
Control Panel	LCD display with touch interface
Network Port	Ethernet 10/100/1000BASE-T
USB Port	USB 2.0 for direct printing
Power Switch	Main power control
Emergency Stop	Instant shutdown button
Maintenance Station	Automatic head cleaning system
Exhaust Fan	Internal temperature regulation

Safety Precautions

Follow all safety guidelines to prevent injury and equipment damage.

1. Electrical Safety: Connect to properly grounded outlet only.
2. Ink Handling: Wear gloves when replacing ink cartridges.
3. Media Loading: Ensure media path is clear before operation.
4. Ventilation: Maintain adequate space around unit for proper airflow.
5. Emergency Procedures: Know location and operation of emergency stop button.

WARNING! Do not operate with covers removed. Disconnect power before performing maintenance.

Installation & Setup

Initial setup procedure for first-time use.

1. Unpacking: Remove all packaging materials and protective tape.
2. Location: Place on stable, level surface with adequate clearance.
3. Power Connection: Connect to dedicated power circuit.
4. Ink Installation: Install all ink cartridges following color sequence.
5. Media Loading: Load appropriate media type and calibrate.
6. Network Setup: Configure IP address and network settings.
7. Software Installation: Install printer drivers and RIP software.

CAUTION! Allow printer to complete initial startup sequence without interruption.

Technical Specifications

• Print Technology: Piezoelectric inkjet
• Resolution: Up to 1440 x 1440 dpi
• Print Speed: Varies by media and quality settings
• Media Width: Maximum 44 inches
• Ink Colors: CMYK + light cyan, light magenta, gray, photo gray
• Interface: Ethernet, USB 2.0
• Power Requirements: 100-240V AC, 50/60Hz
• Operating Environment: 15-30°C, 30-70% humidity
• Dimensions: 1800 x 800 x 1100 mm (WxDxH)
• Weight: Approximately 150 kg

Operation Guide

Daily operation procedures and control panel functions.

Control Panel: Power, Menu, Enter, Up/Down arrows, Stop, Media feed, Maintenance.

Print Modes: High quality, Standard, Draft. Color Management: ICC profiles, color calibration, linearization. Media Settings: Type selection, thickness adjustment, feed calibration. Maintenance Functions: Nozzle check, head cleaning, ink system purge.

Media Handling

Proper media loading and handling procedures.

1. Media Selection: Choose appropriate media type in settings.
2. Loading: Align media properly in feeder mechanism.
3. Calibration: Run media calibration for optimal print quality.
4. Cutting: Set automatic or manual cutting parameters.
5. Unloading: Proper procedure for removing finished prints.

Tip: Always handle media with clean, dry hands to prevent contamination.

Ink System Management

Ink cartridge replacement and system maintenance.

1. Ink Monitoring: Check ink levels regularly via control panel.
2. Replacement: Replace empty cartridges promptly.
3. Priming: Follow priming procedure when installing new cartridges.
4. Storage: Store spare ink in proper environmental conditions.
5. Waste Ink: Monitor waste ink container and replace when full.

WARNING! Use only genuine Fuji ink cartridges to ensure print quality and prevent damage.

Maintenance Procedures

Scheduled maintenance tasks for optimal performance.

1. Daily: Nozzle check print and visual inspection.
2. Weekly: Manual cleaning of print head and platen.
3. Monthly: Full system cleaning and lubrication.
4. Quarterly: Complete calibration and alignment.
5. As Needed: Replacement of consumable parts.

CAUTION! Follow maintenance schedule strictly to prevent costly repairs.

Network Configuration

Network setup and connectivity options.

Ethernet Settings: IP address configuration, subnet mask, gateway. Network Protocols: TCP/IP, LPD, RAW printing. Security: Access control, user authentication. Monitoring: Remote status monitoring and job management.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Print quality issues	Clogged nozzles	Run cleaning cycle; perform nozzle check
Media feeding problems	Misaligned media	Reload media; calibrate feed mechanism
Network connection lost	IP conflict/cable	Check network settings; verify cable connection
Ink cartridge errors	Faulty cartridge	Reseat cartridge; replace if necessary
Unexpected shutdown	Overheating/power	Check ventilation; verify power supply

Reset: Control Panel > System > Factory Reset (use with caution).

Service: Contact authorized Fuji service technician for major repairs.