The Fuji FinePix S8200 is a high-performance digital bridge camera featuring a 16.2MP BSI-CMOS sensor, 40x optical zoom (24-960mm equivalent), 3.0-inch LCD monitor, full HD video recording, optical image stabilization, advanced shooting modes, and wireless connectivity. Below are key sections for camera overview, basic operations, shooting modes, settings, connectivity, and troubleshooting.
Key components: 16.2MP BSI-CMOS sensor, 40x optical zoom lens, 3.0-inch LCD monitor, mode dial, control buttons, flash, and connectivity ports.
| Component | Description |
|---|---|
| Lens | 40x optical zoom (24-960mm equivalent) |
| Sensor | 16.2MP BSI-CMOS |
| LCD Monitor | 3.0-inch, 460K dots |
| Mode Dial | Selects shooting modes (Auto, P, S, A, M, etc.) |
| Shutter Button | Half-press to focus, full press to capture |
| Zoom Lever | Controls optical and digital zoom |
| Flash | Built-in pop-up flash |
| Micro-USB Port | For data transfer and charging |
| HDMI Port | For HD video output |
| Battery Compartment | Holds NP-50 lithium-ion battery |
Getting started with your FinePix S8200 camera.
WARNING! Do not expose camera to extreme temperatures or moisture. Handle with care to avoid damage.
Various shooting modes for different photography scenarios.
TIP: Use optical image stabilization for sharper telephoto shots.
Access settings via MENU button and Quick Menu.
Image Quality: Fine, Normal, RAW; Resolution settings.
Focus Modes: Single AF, Continuous AF, Manual Focus.
White Balance: Auto, Preset, Custom, Kelvin temperature.
Drive Modes: Single, Continuous, Self-timer, Bracketing.
Exposure Compensation: ±2 EV in 1/3 steps.
Flash Modes: Auto, Red-eye reduction, Forced, Slow sync.
Custom Settings: Button customization, Display options.
Wireless and wired connectivity options.
Note: Install Fujifilm Camera App on your mobile device for wireless features.
Reviewing and managing your photos and videos.
Power management and battery information.
Battery Type: NP-50 lithium-ion battery
Battery Life: Approximately 300 shots per charge
Charging: Use provided charger or USB charging
Power Saving: Auto power-off settings available
CAUTION! Use only genuine Fujifilm NP-50 batteries and charger.
Proper care for optimal camera performance.
Cleaning: Use blower for dust, lens pen for lens, soft cloth for body.
Storage: Store in cool, dry place with lens cap on.
Lens Protection: Always use lens cap when not in use.
WARNING! Do not use harsh chemicals or compressed air for cleaning.
FCC Compliance: Class B digital device, complies with part 15 rules. CE Marking: Conforms to European safety standards. Copyright © Fujifilm Corporation. For support, visit www.fujifilm.com/support or contact your local Fujifilm service center.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Camera won't turn on | Battery depleted/incorrectly inserted | Charge battery; ensure proper insertion. |
| Blurry images | Camera shake/focus issues | Use tripod; enable OIS; check focus mode. |
| Memory card error | Card damaged/not formatted | Format card in camera; try different card. |
| Wi-Fi not connecting | Settings/app issues | Check Wi-Fi settings; reinstall app; reset connection. |
| Battery drains quickly | High usage of flash/LCD | Reduce LCD brightness; minimize flash use. |
| Auto focus not working | Low light/subject issues | Use AF assist lamp; ensure adequate lighting. |
Reset: Menu > Setup > Reset to restore default settings.
Service: Contact authorized Fujifilm service center for repairs.