Fuji FinePix 1300 Manual

The Fuji FinePix 1300 is a 1.3-megapixel digital camera featuring 3x optical zoom, 1.8-inch LCD monitor, 8MB internal memory with SmartMedia card expansion, USB connectivity, auto focus, flash modes, self-timer, video recording capability, and powered by 4 AA batteries. Below are key sections for features, setup, operation, settings, maintenance, and troubleshooting.

Features at a Glance

Key components: 1.3MP CCD sensor, 3x optical zoom lens, 1.8-inch color LCD, built-in flash, USB port, SmartMedia card slot, power switch, mode dial.

Feature	Description
Image Sensor	1.3 megapixel CCD
Lens	3x optical zoom
LCD Monitor	1.8-inch color TFT
Memory	8MB internal + SmartMedia card
Connectivity	USB 1.1
Power Source	4 AA batteries
Flash Modes	Auto, Red-eye reduction, Forced, Suppressed
Focus	Auto focus with macro mode
Self-timer	10-second delay
Video Recording	Up to 80 seconds with audio

Package Contents

Unpack and verify all components are present.

• FinePix 1300 Digital Camera
• 4 AA alkaline batteries
• Wrist strap
• USB cable
• CD-ROM (software and manual)
• Quick Start Guide
• Warranty card

NOTE: Contact retailer immediately if any items are missing or damaged.

Camera Setup

Prepare your camera for first use.

1. Install batteries: Open battery compartment, insert 4 AA batteries observing polarity.
2. Insert SmartMedia card: Open card slot cover, insert card with label facing out.
3. Set date/time: Turn camera on, use menu to set current date and time.
4. Install software: Insert CD-ROM, follow on-screen instructions to install FinePix Viewer.

CAUTION! Do not force batteries or memory card. Observe correct polarity.

Specifications

• Effective Pixels: 1.3 million
• Image Resolution: 1280 × 960, 640 × 480
• Lens: Fujinon 3x optical zoom (38-114mm equivalent)
• Focus Range: Normal: 80cm to infinity; Macro: 10-80cm
• LCD Monitor: 1.8-inch, 60,000 pixels
• Storage: 8MB internal memory, SmartMedia card (up to 128MB)
• File Formats: JPEG (still), AVI (movie)
• Interface: USB 1.1
• Power: 4 AA batteries (alkaline or Ni-MH)
• Dimensions: 109.5 × 69.5 × 38.5 mm
• Weight: 220g (without batteries)

Controls and Functions

Familiarize yourself with camera controls and their functions.

Top Panel: Power switch, Shutter button, Mode dial

Back Panel: LCD monitor, Zoom lever, Flash button, Menu button, OK button, Arrow buttons, Display button

Mode Dial Settings: - Auto: Fully automatic shooting - Manual: Manual exposure control - Playback: View stored images - Movie: Record video clips - Setup: Camera configuration

Menu Functions: Image quality, White balance, ISO sensitivity, Exposure compensation, Date/Time, LCD brightness, Beep sound, Auto power off, Format memory, Language selection

Basic Shooting

How to take photos with your FinePix 1300.

1. Turn camera on: Slide power switch to ON.
2. Set mode: Turn mode dial to AUTO for automatic shooting.
3. Compose shot: Use LCD monitor or optical viewfinder.
4. Focus: Half-press shutter button until focus indicator lights.
5. Take photo: Fully press shutter button.
6. Review image: Image appears on LCD for few seconds after capture.

Advanced Features: - Zoom: Use zoom lever for optical zoom (3x) - Flash: Press flash button to cycle through modes - Self-timer: Access via menu for delayed shooting - Macro: Switch to macro mode for close-ups

Playback and Transfer

Viewing images and transferring to computer.

Playback Mode: - Switch mode dial to PLAYBACK - Use arrow buttons to navigate images - Press zoom lever to magnify (up to 4x) - Delete unwanted images with DELETE button

Transfer to Computer:

1. Install FinePix Viewer software from CD-ROM
2. Connect camera to computer using USB cable
3. Turn camera on (automatically enters transfer mode)
4. Use FinePix Viewer to download and organize images
5. Safely disconnect using computer's removal procedure

NOTE: Ensure batteries are sufficiently charged for transfer.

Camera Settings

Customize your camera's operation.

Setting	Options	Description
Image Quality	FINE, NORMAL	Adjust compression level
White Balance	Auto, Daylight, Cloudy, Fluorescent, Incandescent	Color temperature adjustment
ISO Sensitivity	Auto, 100, 200, 400	Light sensitivity setting
Exposure Compensation	±2.0 EV in 1/3 steps	Brightness adjustment
Date/Time	Set current date and time	Time stamp on photos
Auto Power Off	Off, 2min, 5min	Battery saving feature
Format	Internal memory, Memory card	Erase all data

Care & Maintenance

Proper care ensures long camera life.

• Cleaning: Use soft, dry cloth for body and LCD. Use blower brush for lens.
• Storage: Store in cool, dry place. Remove batteries for long-term storage.
• Lens Protection: Always use lens cap when not in use.
• Memory Cards: Format in camera before first use. Avoid touching contacts.
• Batteries: Use recommended battery types. Remove when not in use for extended periods.

WARNING! Do not expose to extreme temperatures, moisture, or dust.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Fuji Photo Film Co., Ltd. All rights reserved. Fuji and FinePix are trademarks of Fuji Photo Film Co., Ltd. For technical support, visit www.fujifilm.com or contact your local Fuji dealer.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Camera doesn't turn on	Dead batteries	Replace with fresh AA batteries
Blurry images	Camera shake, dirty lens	Use tripod, clean lens, ensure proper focus
Memory card error	Card not formatted, damaged	Format card in camera, try different card
USB connection fails	Driver issues, cable problem	Reinstall software, try different USB cable
Flash doesn't work	Flash setting, low battery	Check flash mode, replace batteries
LCD monitor blank	Power save mode, display off	Press any button, check display setting

Reset: Remove batteries for 30 seconds to reset camera.

Service: Contact authorized Fuji service center for repairs.