fuji av130 manual

The Fuji AV130 is a professional-grade audio/video receiver with multi-zone capability, HDMI connectivity, Dolby Atmos and DTS:X support, built-in Wi-Fi and Bluetooth, 4K video pass-through, and advanced audio processing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 7.2 channel amplifier, Remote Control, HDMI inputs/outputs, Ethernet port, Wi-Fi antenna, Speaker terminals, Zone 2 outputs.

Feature	Description
HDMI Inputs	6 HDMI 2.1 inputs with 4K/120Hz pass-through
Audio Formats	Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio
Network Connectivity	Built-in Wi-Fi, Bluetooth 5.0, Ethernet
Multi-zone	Zone 2 audio output for second room
Power Output	130W per channel (8 ohms, 20Hz-20kHz)
Phono Input	MM phono input for turntable connection
USB Port	For firmware updates and media playback
Auto Calibration	Advanced room acoustic correction
Streaming	Spotify Connect, AirPlay 2, Chromecast built-in
Display	Front panel display with dimmer control

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Use appropriate gauge speaker wire for each channel.
2. Connect source devices: Use HDMI cables for modern devices; analog for legacy equipment.
3. Connect display: Use HDMI OUT to TV or projector.
4. Connect network: Use Ethernet cable or setup Wi-Fi.
5. Plug into AC power.

WARNING! Ensure adequate ventilation; do not block cooling vents. Use proper speaker impedance matching.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

1. Speaker configuration: Run auto calibration with included microphone.
2. Input assignment: Assign sources to HDMI inputs (BD, DVD, GAME, etc.).
3. Network setup: Connect to Wi-Fi or Ethernet network.
4. Streaming services: Log into Spotify, Pandora, etc.
5. Zone 2 setup: Configure second room audio if needed.

CAUTION! Keep magnetic devices away from receiver. Ensure stable power supply.

Specifications

• Amplifier Section: 7.2 channels, 130W per channel (8 ohms)
• Audio Decoding: Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD MA
• Video Support: 4K/120Hz, HDR10+, Dolby Vision, HLG
• Connectivity: 6 HDMI in, 2 HDMI out, Phono, Optical, Coaxial
• Network: Wi-Fi (2.4/5GHz), Bluetooth 5.0, Ethernet
• Streaming: Spotify, Pandora, Tidal, AirPlay 2, Chromecast
• Power Consumption: 650W maximum, 0.5W standby
• Dimensions: 17.1" W × 6.8" H × 15.4" D
• Weight: 28.7 lbs (13 kg)

Controls and Settings

Access menu via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, MENU, SETUP.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, MENU, SETUP, Navigation buttons, Sound Mode selection.

Audio Settings: Speaker configuration, crossover settings, distance calibration, EQ adjustments. Video Settings: Resolution output, HDR settings, HDMI control. Network Settings: Wi-Fi setup, streaming service configuration. System Settings: Firmware update, factory reset, zone control.

Connecting Devices

HDMI: Primary connection for modern devices. Analog: Phono, CD, auxiliary inputs. Network: Ethernet or Wi-Fi.

1. Turn off receiver and devices before connecting.
2. Use high-speed HDMI cables for 4K content.
3. Assign inputs in setup menu for easy selection.
4. Connect subwoofer(s) to dedicated LFE outputs.

Tip: Use HDMI ARC for simplified TV audio connection.

Audio/Video Setup

Advanced calibration and configuration options.

1. Auto calibration: Place microphone at listening position and run setup.
2. Manual adjustments: Fine-tune speaker levels, distances, crossovers.
3. Sound modes: Select from Stereo, Direct, Dolby Surround, DTS Neural:X.
4. Video processing: Configure 4K upscaling, HDR settings.
5. Lip sync: Adjust audio delay for perfect synchronization.

WARNING! Ensure proper speaker polarity for optimal sound quality.

Network Features

Streaming services and network control capabilities.

1. Music streaming: Access Spotify, Pandora, Tidal directly.
2. Multi-room audio: Control Zone 2 independently.
3. App control: Use manufacturer app for remote control.
4. Firmware updates: Automatic or manual update capability.
5. Voice control: Compatible with Amazon Alexa and Google Assistant.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep vents clear of dust.

CAUTION! Do not use liquid cleaners. Avoid blocking ventilation openings. Professional service recommended for internal cleaning.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE, RoHS compliant. Copyright © 2024 Fuji Audio; all rights reserved. For support, visit www.fujiaudio.com or contact 1-800-555-2834.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/volume	Check input selection; ensure volume not muted; verify speaker connections.
No video	HDMI connection	Check HDMI cables; verify TV input selection; try different HDMI port.
Network issues	Wi-Fi/Ethernet	Check network connection; restart router; verify password.
Remote not working	Batteries/obstacles	Replace batteries; ensure line of sight to IR sensor.
Overheating	Ventilation	Ensure adequate ventilation; clear vents; reduce volume if necessary.

Reset: Hold POWER + MENU for 10 seconds to factory reset.

Service: 1-800-555-2834; www.fujiaudio.com/support