Fuji AF 300 Manual

The Fuji AF 300 is a compact 35mm autofocus camera featuring automatic film loading, automatic exposure control, built-in flash, auto film advance and rewind, date imprinting function, and self-timer. With its lightweight design and simple operation, it's ideal for everyday photography. Below are key sections for camera overview, basic operation, advanced features, maintenance, and troubleshooting.

1. Camera Overview 2. Basic Operation 3. Loading Film 4. Taking Pictures 5. Flash Operation 6. Advanced Features 7. Specifications 8. Care & Maintenance 9. Troubleshooting

Camera Overview

Main components: Lens, Viewfinder, Flash, Film compartment, Battery compartment, LCD panel, Control buttons.

ComponentDescription
Lens35mm f/4.5 autofocus lens
ViewfinderBright frame viewfinder with focus indicators
Built-in FlashAuto pop-up flash with red-eye reduction
Film compartmentAutomatic film loading and advance
Battery compartmentUses 2x AA batteries
LCD panelDisplays frame counter, battery status, flash mode
Shutter buttonTwo-stage button for focus and exposure
Flash mode buttonCycles through flash options
Self-timer buttonActivates 10-second delay
Date imprint buttonToggles date stamp function

Basic Operation

Prepare camera for first use and basic shooting procedures.

  1. Install batteries: Open battery compartment, insert 2x AA batteries observing polarity.
  2. Check battery level: Green LED in viewfinder indicates sufficient power.
  3. Load film: Open back cover, insert film cartridge, pull leader to mark.
  4. Close back cover: Camera automatically advances to frame 1.

WARNING! Do not open film compartment while film is loaded. Avoid exposing lens to direct sunlight.

Loading Film

Automatic film loading and advance system.

  1. Open back cover: Slide latch to open camera back.
  2. Insert film: Place 35mm film cartridge in chamber.
  3. Pull film leader: Extend leader to orange mark on right side.
  4. Close back: Camera automatically advances to first frame.
  5. Check frame counter: LCD should display "1" when ready.

CAUTION! Handle film by edges only. Ensure back is securely closed.

Taking Pictures

Basic photography procedure with autofocus system.

  1. Compose shot: Look through viewfinder and frame subject.
  2. Half-press shutter: Camera focuses automatically (green LED confirms).
  3. Full press: Take picture when ready.
  4. Film advance: Camera automatically advances to next frame.
  5. Rewind: Camera automatically rewinds film when roll is complete.

Tip: Keep camera steady during exposure. Use flash in low light conditions.

Flash Operation

Built-in flash with multiple modes for different lighting conditions.

Flash range: 1.0m to 3.0m (ISO 100). Recycling time: Approximately 4 seconds.

Advanced Features

Additional functions for enhanced photography.

Self-timer: 10-second delay with audible beeps. LED blinks during countdown.

Date Imprint: Records date/time on lower right corner of photo. Set using date button.

Exposure Compensation: +/- 1.5EV adjustment for backlit subjects.

Infinity Mode: Locks focus at infinity for distant landscapes.

Specifications

Care & Maintenance

Proper handling and cleaning procedures.

  1. Storage: Keep in cool, dry place away from direct sunlight.
  2. Cleaning: Use soft brush for lens; dry cloth for body.
  3. Batteries: Remove if not using for extended periods.
  4. Avoid: Extreme temperatures, humidity, sand, and dust.

CAUTION! Never use alcohol or solvents on lens. Do not disassemble camera.

Troubleshooting

ProblemPossible CauseSolution
Camera doesn't workDead batteriesReplace with fresh AA batteries
Film not advancingImproper loadingReload film ensuring leader reaches mark
Flash not firingRecycling/disabledWait 4 seconds; check flash mode setting
Out of focusSubject too closeEnsure subject is at least 1.0m away
Film jamMechanical issueRemove batteries, reopen in darkroom

Service: Contact authorized Fuji service center for repairs.

Fuji AF 300 Manual © - All Rights Reserved 2025